Lanthanum-selective sensors based on 3-amino-2-mercapto-3H-quinazolin-4-one in PVC matrix

A new solvent polymeric membrane (PME) and coated graphite (CGE) electrodes based on 3-amino-2-mercapto-3H-quinazolin-4-one as a suitable carrier for La(III) ion are described. The sensors exhibited a Nernstian response for La(III) ion over a wide concentration range (3.0 × 10^?7 to 1.0 × 10^?1 M for PME and 1.0 × 10^?7 to 1.0 × 10^?1 M for CGE) with a slope of 20.1 ± 0.3 (PME) and 23.4 ± 0.4 (CGE) mV decade^?1. The lower detection limits by PME and CGE were 2.0 × 10^?7 and 7.1 × 10^?8 M, respectively. The potentiometric response of the proposed electrodes was independent of the pH of the test solution in the pH range 3.0–9.0 with a fast response time (<10 s). The applications of prepared sensors were demonstrated in the determination of lanthanum ions in spiked water sample and also utilized for indirect determination of fluoride content of two mouth wash preparation samples.     

Homogeneous Liquid–Liquid Microextraction Via Flotation Assistance (HLLME-FA) Method for the Pretreatment of Organochlorine Pesticides in Aqueous Samples and Determination by GC–MS

This work proposes a new, rapid and simple homogeneous liquid–liquid microextraction via flotation assistance technique for the analysis of six organochlorine pesticides in water samples. A special extraction cell was used to facilitate collection of the low-density solvent extract. No centrifugation was required in this procedure. Determination was carried using gas chromatography–mass spectrometry. The water sample solution was then added into the extraction cell containing appropriate mixture of extract and homogeneous solvents. In the first step, a homogeneous solution and then with the continuation of water sample injection, a cloudy solution was formed. Using air flotation, the organic solution was collected at the conical part of the designed cell. The optimized levels of effective parameters were found based on response surface methodology approach. Applying the optimized conditions to the system understudy, the limits of detection of all target analytes were obtained in the range of 1.4–7 ng mL^?1, while the precisions were found to be in the range of 11.08–14.87 (RSD, n = 3). The linearity of the method lay in the range of 10–150 ng mL^?1 with the coefficients of correlation (r ² ) ranging from 0.998 to 0.999.     

“Grafting through” approach for synthesis of polystyrene/silica aerogel nanocomposites by in situ reversible addition-fragmentation chain transfer polymerization

Aerogel/polystyrene nanocomposites with mixed free and aerogel-attached polystyrene chains were synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization. 3-methacryloxypropyldimethylchlorosilane containing a double bond, which could be incorporated into polystyrene chains by a “grafting through” approach, was used as an aerogel modifier. Kinetics of RAFT polymerization of styrene in the presence of modified silica aerogel was studied by monitoring conversion and molar mass values. To further study, attached polymers were detached and their molecular characteristics were compared to free chains. According to results, the presence of silica aerogel particles has a sensible influence on polymerization kinetic and more aerogels result in decreased polymerization rate and conversion. The dispersity (Ð) of polymer chains increased by the addition of silica aerogel. In the case of aerogel-attached polystyrene chains, number-averaged molar mass values were slightly lower than that of free chains. Also, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques were used to observe the effect of loading on thermal properties of synthesized nanocomposites.     

Batch and continuous fixed-bed column biosorption of thorium(IV) from aqueous solutions: equilibrium and dynamic modeling

Biosorption of thorium(IV) from aqueous solution by Cystoseira indica alga was investigated in batch and fixed-bed column experiments. In the batch study the effects of pH and initial concentration were investigated. The optimum pH for Th(IV) biosorption was found to be 3.5. The experimental isotherms obtained at different pH conditions were analyzed using three two-parameter models and three three-parameter models. Among the two-parameter models the Langmuir model and among the three-parameter models the Redlich–Peterson model vividly described the equilibrium data. The results showed that C. indica alga is a homogeneous biosorbent and Th(IV) biosorption is a favorable and physical process. The maximum biosorption capacity from the Langmuir model was 151.3, 195.7 and 120.6 mg/g at pH 2.5, 3.5 and 4.5, respectively. The continuous isotherm obtained from the column data was modeled by the Langmuir model and the maximum biosorption capacity was 283.8 mg/g. The experimental data were fitted by the use of an analytical and a numerical model, namely Clark and mass transfer models. The results showed that the mass transfer model adequately described the experimental data. Sensitivity analysis revealed that the value of k _in has more effect than the axial dispersion coefficient (D _z) on the shape of breakthrough curve.     

Analysis of xylene in aqueous media using needle‐trap microextraction with a carbon nanotube sorbent

This paper describes a new extraction technique with needles and a sorbent based on carbon nanotubes to analyze trace amounts of three isomers of xylenes in aqueous samples. In this research, results have been compared with one commercial sorbent. The synthesized sorbent was prepared using sol–gel technology and was packed into 20 gauge needles, and the same size needle was used for packing the commercial sorbent. In the extraction process, a purge and trap sampling methodology is developed, so purging and trapping cycles were performed by a sampling pump. Optimized conditions for standard xylene samples have been obtained, and eight urine samples from workers that were exposed to xylene in the workplace were collected and analyzed. Experimental parameters such as limits of detection and quantification were investigated, and these two parameters were <1 μg/L.     

Poly (methyl methacrylate) grafted wheat straw for economical and eco-friendly treatment of oily wastewater

Cellulose - The sustainable development of oil–gas and petrochemical industries necessitates the development of cost-effective and eco-friendly technologies to treat mass-produced oily...     

Develop dissipative particle dynamics method to study the fluid flow and heat transfer of Ar and O2 flows in the micro- and nanochannels with precise atomic arrangement versus molecular dynamics approach

Fluid atomic behavior is an important factor for industrial applications. Computer simulations based on simple models predict Poiseuille flow for these atomic structures with the presence of external force. In this work, we describe the dynamical properties of Ar and O₂ flows with precise atomic arrangement via dissipative particle dynamics (DPD) and molecular dynamics (MD) simulation approaches. In these methods, each model is represented by using Large-scale Atomic/Molecular Massively Parallel Simulator package. Simulation results show that maximum rate for velocity of Ar flow in platinum and copper microchannels is 0.100 (unit less)/0.091 Å ps^?1 and 0.121 (unit less)/0.105 Å ps^?1 by using DPD/MD approach. This atomic parameter changes to 0.111 (unit less)/0.102 Å ps^?1 and 0.125 (unit less)/0.108 Å ps^?1 for O₂ fluid with mentioned approaches. By decreasing the microchannel size, the maximum rate of velocity reaches to 0.101 (unit less)/0.099 Å ps^?1 and maximum temperature rate decreases to 485 (unit less)/440 K with DPD/MD approaches. These calculated parameters can be used in industrial application designing for some processes such as heat transfer in structures. It was seen that the developed DPD approach was able to simulate the fluid flow and heat transfer of various types of fluids at micro- and nanoscales with suitable accuracy versus MD.

     

Thermal properties of mercury(II) and palladium(II) purine and pyrimidine complexes

Six solid Pd(II) and Hg(II) complexes of some purines and pyrimidines have been prepared and characterized by elemental analyses, IR, UV–Vis spectra, magnetic measurements, and thermal analyses. The data suggest tetrahedral and square planar geometries for mercury and palladium complexes, respectively. The thermal behavior of the complexes has been studied applying TG, DTA, and DSC techniques, and the thermodynamic parameters and mechanisms of the decompositions were evaluated. The ?S* values of the decomposition steps of the metal complexes indicated that the activated fragments have more ordered structure than the undecomposed complexes, and/or the decomposition reactions are slow. The thermal processes proceeded in complicated mechanisms where the bond between the central metal ion and the ligands dissociates after losing small molecules such as H₂O, HCl or C=O. The palladium adenine complex is ended with the metal as a final product. However, the thermal reactions of the other five palladium and mercury pyrimidines complexes are ended with metal bonded to O, N, or S of the pyrimidine ring.     

Insulin Resistance Associated Genes and miRNAs

Type 2 diabetes mellitus is the result of resistance to insulin function along with inadequate insulin secretion, leading to a number of dysfunctions characterized by hyperglycemia, and it is associated with microvascular, macrovascular, and neuropathic complications. There is compelling evidence that the decline in both insulin sensitivity and insulin secretion has a genetic component. In addition, increasing evidence suggests that microRNAs (miRNAs) as key regulators of gene expression play significant roles in insulin production, secretion, and function that regulate the function of insulin-target tissues. The current review demonstrates the candidate genes and the related miRNAs involved in molecular pathogenesis of insulin resistance in type 2 diabetes mellitus. In doing so, it provides an opportunity for more focused investigations that may identify the genes and miRNAs with a role in the pathogenesis of type 2 diabetes mellitus and its treatment.