Oligomers of β-amino acid bearing non-planar amides form ordered structures

In this report, we explore the feasibility of using bicyclic chiral β-amino acids, (1R,2R,4S)- and (1S,2S,4R)-7-azabicyclo[2.2.1]heptane-2-carboxylic acid (R-Ah2c and S-Ah2c, respectively), to prepare novel peptides with unique properties. Facile cis-trans isomerization of the non-planar amide bonds of these β-amino acids should result in great flexibility of the backbone structure of β-peptides containing them. Indeed, oligomers of these amino acids showed thermostability and characteristic CD absorptions, which were not concentration-dependent, suggesting that the oligomers remained monomeric. The results indicated the formation of self-organized monomeric structures with chain-length-dependent stabilization. Energy calculations suggested that the peptides can take helical structures in which the energy barriers to cis-trans isomerization are greater for the central amide bonds than for the terminal amides.     

Influence of an iodine treatment on the structure and physical properties of Bombyx mori silk fibroin fiber

Silk fibroin (SF) fiber from the Bombyx mori silkworm was treated with a 1.23 N iodine/potassium iodide (I₂–KI) aqueous solution, and the structure and physical properties were investigated to elucidate the effects of the iodine treatment. The SF fiber absorbed polyiodide ions such as I and I by immersion in the I₂–KI solution, and the weight gain of the SF fiber increased with the treatment time; it became saturated at about 20 wt % after 40 h. The results of the weight gain, Fourier transform infrared spectroscopy, and X‐ray diffraction measurements suggested that polyiodide ions mainly entered the amorphous region. Moreover, a new sharp reflection in the meridional direction, corresponding to a period of 7.0 Å, was observed and indicated the possibility of the formation of a mesophase structure of β‐conformation chains. Dynamic viscoelastic measurements showed that the molecular motion of the crystalline regions at about 220 °C was enhanced and shifted to lower temperature by the introduction of polyiodide ions. This indicated that the iodine component weakened the hydrogen bonding between the SF molecules forming the β‐sheet structure and caused molecular motion of the crystal to occur more easily with heating. With heating above 270 °C, the iodine component introduced intermolecular crosslinking to SF, and the melt flow of the sample was inhibited. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3418–3426, 2006     

Changes in electronic structure upon Li insertion reaction of monoclinic Li3Fe2(PO4)3

The electrochemical lithium insertion reaction of monoclinic Li(3)Fe(2)(PO(4))(3) as cathode materials of lithium-ion batteries was investigated from the viewpoint of the electronic structure around Fe and the polyanion unit (PO(4)). Fe K-edge and L(III,II)-edge XAS measurements revealed that Fe(3+) was reduced to Fe(2+) upon Li insertion. In addition, O K-edge and P K-edge XAS also showed spectral changes upon Li insertion, which corresponded to changes in the electronic structure of the PO(4) polyanion unit. The ab initio density functional calculation was performed within the GGA and LDA+U methods. The LDA+U method reproduced well the cell potential upon lithium intercalation into Li(3)Fe(2)(PO(4))(3), whereas the GGA method underestimated the intercalation. The calculated electronic structure of Li(3)Fe(2)(PO(4))(3) described strong P 3p-O 2p covalent bonding, while weak hybridization was indicated in Fe 3d-O 2p. Moreover, the difference in electronic density between Li(3)Fe(2)(PO(4))(3) and the lithiated model indicated that the polarization effect between inserted Li and oxygen induced the changes in the electronic structure around the polyanion unit.     

Spontaneous resolution of aromatic sulfonamides: effective screening method and discrimination of absolute structure

An effective screening method combining parallel synthesis and solid-state CD measurements was established to identify achiral aromatic sulfonamides that show spontaneous resolution with rapidity. We found that 4 of the 12 achiral sulfonamides crystallized as chiral crystals through this method. The chirality of each sulfonamide was discriminated by solid-state CD spectra and Flack parameter in an X-ray analysis. Correspondence between the observed Cotton effect and the absolute configuration could be confirmed by time-dependent DFT calculations. [structure: see text]     

Influence of acidic eluent for retention behaviors of common anions and cations by ion-exclusion/cation-exchange chromatography on a weakly acidic cation-exchange resin in the H+ -form

Influence of acidic eluent on retention behaviors of common anions and cations by ion-exclusion/cation-exchange chromatography (ion-exclusion/CEC) were investigated on a weakly acidic cation-exchange resin in the H(+)-form with conductivity. Sensitivities of analyte ions, especially weak acid anions (F(-) and HCOO(-)), were affected with degree of background conductivity level with pK(a1) (first dissociation constant) of acid in eluent. The retention behaviors of anions and cations were related to that of elution dip induced after eluting acid to separation column and injecting analyte sample. These results were largely dependent on the natures of acid as eluent. Through this study, succinic acid as the eluent was suitable for simultaneous separation of strong acid anions (SO(4)(2-), Cl(-), NO(3)(-) and I(-)), weak acid anions (F(-), HCOO(-) and CH(3)COO(-)), and cations (Na(+), K(+), NH(4)(+), Mg(2+) and Ca(2+)). The separation was achieved in 20 min under the optimum eluent condition, 20 mM succinic acid/2 mM 18-crown-6. Detection limits at S/N=3 ranged from 0.10 to 0.51 microM for strong acid anions, 0.20 to 5.04 microM for weak acid anions and 0.75 to 1.72 microM for cations. The relative standard deviations of peak areas in the repeated chromatographic runs (n=10) were in the range of 1.1-2.9% for anions and 1.8-4.5% for cations. This method was successfully applied to hot spring water containing strong acid anions, weak acid anions and cations, with satisfactory results.     

Switching in molecular shapes: main chain length driven rod-circle transition of isolated helical polysilanes

Unique conformations such as rod, semicircle, and circle structures of isolated semi-flexible helical polysilanes were observed by atomic force microscopy (AFM); the chain topology was significantly related to the chain length (molecular weight) on the surfaces.     

Study on the intermolecular interaction of C60 and simulations on the orientational properties of C60 in crystals

We developed the new intermolecular interaction model of C(60) with the quantitative accuracy for the molecular orientational properties in crystals. The energy difference (DeltaE) and the activation barrier (E(barrier)) between the two stable orientations (P and H orientations) in crystals are in the values of +14.7 and +260 meV in our model, respectively; these values are in fairly good agreement with the experimental values (DeltaE approximately +11 meV, E(barrier)=+235-+290 meV in experiments). The relaxation calculation for C(60) crystals using our model revealed that there is the reversal of the stable orientations between the P and H orientations under the high H-orientation occupancy (p(H)) in crystals, when p(H)>0.83, DeltaE<0. From the molecular dynamics calculations for C(60) crystals using our model, it is found that the phase transition is induced at T(C)=200-260 K, which is consistent with the experimental value of 260 K. Immediately below T(C), we found a great variety of molecular rotational jumps involving that between the P and H orientations every about 10(-9) s due to the thermal activation. In the high temperature phase (>T(C)), all molecules rotate irregularly like in Brownian motion involving the rotational "slumber" for approximately 10(-12)-10(-11) s.     

Photooxygenation and photodimerization of 4-methoxystyrene in NaY. The role of co-adsorbed water and alkene–oxygen charge-transfer complex

On adsorption into NaY, 36% of 4-methoxystyrene (1) was consumed to yield its cis- and trans- chain dimers 2. Irradiation of the NaY sample under vacuum gave cyclic dimers 3, probably through the excimer of 1, and also caused trans-to-cis one-way isomerization of 2. When the NaY sample was irradiated under dry oxygen, 4-methoxybenzaldehyde (4) was given as the major product through photoinduced electron-transfer reaction on excitation of the contact charge-transfer complexes between the guest molecules and O₂. The effects of sodium ion and co-adsorbed water on the photodimerization and photooxygenation is also discussed.     

Convenient synthesis of 1,6,7,8-substituted 2-(3′,4′-substituted-phenyl)-4-quinolones via a 4-ethoxyflavylium salt

Condensation of 2-hydroxyacetophenone with benzaldehyde in the presence of 70% perchloric acid in ethyl orthoformate gave the corresponding 4-ethoxyflavylium perchlorate, which was treated with aqueous ammonia or methylamine solution to afford 1,6,7,8-substituted 2-(3′,4′-substituted-phenyl)-4-quinolone in fair to good yield.