Synthesis,structure, and magnetic properties of dinuclear cobalt(II) complexes with a new phenol-based dinucleating ligand with four hydroxyethyl chelating arms

A new end-off type acyclic ligand with four hydroxyethyl arms, 2,6-bis[bis(2-hydroxyethyl)aminomethyl]-4-methylphenol [H(bhmp)], formed dinuclear cobalt(II) complexes [Co(2)(bhmp)(OAc)(2)]BPh(4) (1) and [Co(2)(bhmp)(OBz)(2)]BPh(4) (2). The complex 1.2.5CH(3)CN (C(50)H(62.5)BCo(2)N(4.5)O(9)) crystallizes in the monoclinic space group C2/c with dimensions a = 25.424(5) A, b = 13.376(2) A, c = 29.913(6) A, beta = 105.930(3) degrees, and V = 9781(3) A(3) and with Z = 8. X-ray diffraction analysis revealed a mu-phenoxo-bis(mu-acetato)dicobalt(II) core structure containing two octahedral cobalt(II) ions. Electronic spectra were investigated for 1 and 2 in the range 400-1800 nm, and the data were typical for the octahedral high-spin cobalt(II) complexes. Magnetic susceptibility was measured for 1 and 2 over the temperature range 4.5-300 K, and the data were analyzed well using our theoretical method. The best fitting parameters were kappa = 0.77, lambda = -116 cm(-1), Delta = 572 cm(-1), and J = -0.44 cm(-1) for complex 1 and kappa = 0.96, lambda = -93 cm(-1), Delta = 616 cm(-1), and J = -0.33 cm(-1) for complex 2.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.     

Reversal of diastereofacial selectivity in the intramolecular michael addition of -α-carbamoyloxy-α,β-unsaturated esters. Synthesis of N-benzoyl-D,L-daunosamine

Contrary to the precedents, 1,3-anti stereoselection was found in the intramolecular Michael addition of ethyl $\text{threo}$,5-carbamoyloxy-4-trialkylsilyloxy-2-hexenoate to culminate in a synthesis of N-benzoyl-$\text{D}$,$\text{L}$-daunosomine. The antiperiplanar effect due to the group at 4-position was revealed to play a major role in the stereoselection in this type of reactions. N-benzoyl-$\text{D}$,$\text{L}$-3-epidaunosamine was also synthesized by 1,2-syn asymmetric induction.     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

Palladium-catalyzed direct coupling reaction of propargylic alcohols with arylboronic acids

The direct coupling of propargylic alcohols with arylboronic acids has been achieved using palladium catalyst. Various propargylic alcohols and arylboronic acids can be coupled to afford the corresponding allenic and propargylic arenes, which are selectively produced depending on the substituent on the propargylic alcohol, respectively.     

Asymmetric induction copolymerization. Cationic copolymerization of l-menthyl vinyl ether with indene and acenaphthylene

l-Menthyl vinyl ether (l-MVE) was homopolymerized and copolymerized with the monomers indene (IN) and acenaphthylene (ANp) by BF₃OEt₂ as a catalyst. The chiral menthyl substituent was cloven from the homopolymers and copolymers using dry-hydrogen bromide gas. After the removal of optically active menthyl group, poly(vinyl alcohol) (PVA) from l-MVE homopolymer was optically inactive, and copolymers (VA-IN, VA-ANp) from l-MVE-IN and l-MVE-ANp copolymers were still optically active. Hence, in the case of l-MVE homopolymer, it was concluded that asymmetric induction in the polymer main chain can only produce pseudoasymmetry. In the case of l-MVE-IN and l-MVE-ANp copolymers, it was found that asymmetric induction proceeded in the copolymer main chain and was caused by the influence of chiral menthyl group.     

Asymmetric induction radical copolymerization of optically active l-menthyl vinyl ether with vinylene carbonate and indene

The copolymerizations of l-menthyl vinyl ether (l-MVE) with the monomers vinylene carbonate (VCA) and indene (IN) were carried out in benzene with azobisisobutyronitrile (AIBN) as an initiator to obtain optically active copolymers. The optically active l-menthyl residue from the copolymer main chain was removed using dry hydrogen bromide gas. After the ether cleavage reaction, the copolymers prepared (VA–VCA and VA–IN) were still optically active, and hence it was found that asymmetric induction had taken place in the copolymer main chain. The optical rotatory dispersion (ORD) and circular dichroism (CD) data of the original and ether-cloven copolymers were also determined.     

Recent progress of high-power negative ion beam development for fusion plasma heating

A negative-ion-based neutral beam injector (N-NBI) has been constructed for JT-60U. The N-NBI is designed to inject 500 keV, 10 MW neutral beams using two ion sources, each producing a 500 keV, 22 A D⁻ ion beam. In the preliminary experiment using one ion source, a D⁻ ion beam of 13.5 A has been successfully accelerated with an energy of 400 keV (5.4 MW) for 0.12 s at an operating pressure of 0.22 Pa. This is the highest D⁻ beam current and power in the world. Co-extracted electron current was effectively suppressed to the ratio of Ie/I_D⁻ < 1. The highest energy beam of 460 keV, 2.4 A, 0.44 s has also been obtained. To realize 1 MeV class NBI system for ITER (International Thermonuclear Experimental Reactor), demonstration of ampere class negative ion beam acceleration up to 1 MeV is an important mile stone. To achieve the mile stone, a prototype accelerator and a 1 MV, 1 A test facility called MeV Test Facility (MTF) were constructed. Up to now, an H⁻ ion beam was accelerated up to the energy of 805 keV with an acceleration drain current of 150 mA for 1 s in a five stage electrostatic multi-aperture accelerator.     

Polymerizability of unsaturated monomers capable of forming stable radicals

Some unsaturated monomers bearing hindered phenol and arylamine groups capable of forming stable radicals were prepared. Radical polymerizations of vinyl monomers having such groups were investigated with the use of azobisisobutyronitrile, benzoyl peroxide, cumene hydroperoxide, and tetraethylthiuram disulfide as initiator. Polymerizations of these monomers went normally only when azobisisobutyronitrile was used as initiator. The other initiators inhibited polymerizations remarkably or completely. The results suggest that radicals resulting from benzoyl peroxide and cumene hydroperoxide or tetraethylthiuram disulfide abstract hydrogen of the phenol or the amine to produce the stable radicals, thereby inhibiting the polymerization. Meanwhile, carbon radicals resulting from azobisisobutyronitrile add selectively to the vinyl double bonds of the monomers to initiate the polymerizations. The vinyl derivatives as well as allyl derivatives and cinnamic acid derivatives copolymerize easily with conventional monomers such as styrene, maleic anhydride, and butadiene, again, only when azobisisobutyronitrile was used as initiator. Antioxidative properties for styrene copolymers and butadiene-styrene copolymers incorporating the hindered phenol monomers were investigated.