Local Hartree–Fock orbitals using a three‐level optimization strategy for the energy

Using the three‐level energy optimization procedure combined with a refined version of the least‐change strategy for the orbitals—where an explicit localization is performed at the valence basis level—it is shown how to more efficiently determine a set of local Hartree–Fock orbitals. Further, a core–valence separation of the least‐change occupied orbital space is introduced. Numerical results comparing valence basis localized orbitals and canonical molecular orbitals as starting guesses for the full basis localization are presented. The results show that the localization of the occupied orbitals may be performed at a small computational cost if valence basis localized orbitals are used as a starting guess. For the unoccupied space, about half the number of iterations are required if valence localized orbitals are used as a starting guess compared to a canonical set of unoccupied Hartree–Fock orbitals. Different local minima may be obtained when different starting guesses are used. However, the different minima all correspond to orbitals with approximately the same locality. © 2013 Wiley Periodicals, Inc.     

Method development for simultaneous analysis of HBCD,TBBPA, and dimethyl-TBBPA in marine biota from Greenland and the Faroe Islands

The brominated flame retardants hexabromocyclododecane (HBCD) and tetrabromobisphenol A (TBBPA) are high-production-volume chemicals. In recent years, their presence has been reported in sediment and biota from the marine environment. In this study, an analytical method was developed for the simultaneous determination of HBCD, TBBPA, and the possible metabolite dimethyl-TBBPA. The method was applied in a preliminary screening of egg, liver, and adipose tissue of marine biota from Greenland and the Faroe Islands. α-HBCD was detected in 35 of 36 analysed samples from the Arctic, indicating a ubiquitous presence of α-HBCD in the environment. β- and γ-HBCD were found in 10 and 14 samples, respectively. TBBPA and dimethyl-TBBPA were not detected in any of the samples indicating limited or no transport of these compounds to remote areas.     

Synthesis and Properties of Surfactants derived from N‐Acetyl‐D‐Glucosamine

The synthesis of 2‐acetamido‐2‐deoxy‐6‐O‐octanoyl‐D‐glucono‐1,5‐lactone 9 and 2‐acetamido‐2‐deoxy‐6‐O‐octanoyl‐α‐D‐glucopyranose 7 from 2‐acetamido‐2‐deoxy‐α‐D‐glucopyranose is reported. For both targets, the key intermediate was allyl 2‐acetamido‐3,4‐di‐O‐benzyl‐2‐deoxy‐6‐O‐octanoyl‐α‐D‐glucopyranoside 5. Surface tension measurements (critical micellar concentration of 22.3 mM and 5 mM for 9 and 7, respectively) showed up the surface activity of both compounds, while enzyme inhibition assays indicated that 9 could inhibit bovine β‐N‐acetylglucosaminidase (K_i=6.5 µM) but not Serratia marcescens chitobiase nor hen egg‐white lysozyme. Moreover, 7 was shown to induce chitinase production of S. marcescens and to be readily metabolized by these bacteria.      

A Designed 5‐Fluorouracil‐Based Bridged Silsesquioxane as an Autonomous Acid‐Triggered Drug‐Delivery System

Two new prodrugs, bearing two and three 5‐fluorouracil (5‐FU) units, respectively, have been synthesized and were shown to efficiently treat human breast cancer cells. In addition to 5‐FU, they were intended to form complexes through H‐bonds to an organo‐bridged silane prior to hydrolysis‐condensation through sol–gel processes to construct acid‐responsive bridged silsesquioxanes (BS). Whereas 5‐FU itself and the prodrug bearing two 5‐FU units completely leached out from the corresponding materials, the prodrug bearing three 5‐FU units was successfully maintained in the resulting BS. Solid‐state NMR (²⁹Si and ¹³C) spectroscopy show that the organic fragments of the organo‐bridged silane are retained in the hybrid through covalent bonding and the ¹H NMR spectroscopic analysis provides evidence for the hydrogen‐bonding interactions between the prodrug bearing three 5‐FU units and the triazine‐based hybrid matrix. The complex in the BS is not affected under neutral medium and operates under acidic conditions even under pH as high as 5 to deliver the drug as demonstrated by HPLC analysis and confirmed by FTIR and ¹³C NMR spectroscopic studies. Such functional BS are promising materials as carriers to avoid the side effects of the anticancer drug 5‐FU thanks to a controlled and targeted drug delivery.     

Boronate Ligands in Materials: Determining Their Local Environment by Using a Combination of IR/Solid‐State NMR Spectroscopies and DFT Calculations

Boronic acids (R‐B(OH)₂) are a family of molecules that have found a large number of applications in materials science. In contrast, boronate anions (R‐B(OH)₃^?) have hardly been used so far for the preparation of novel materials. Here, a new crystalline phase involving a boronate ligand is described, Ca[C₄H₉‐B(OH)₃]₂, which is then used as a basis for the establishment of the spectroscopic signatures of boronates in the solid state. The phase was characterized by IR and multinuclear solid‐state NMR spectroscopy (¹H, ¹³C, ¹¹B and ⁴³Ca), and then modeled by periodic DFT calculations. Anharmonic OH vibration frequencies were calculated as well as NMR parameters (by using the Gauge Including Projector Augmented Wave—GIPAW—method). These data allow relationships between the geometry around the OH groups in boronates and the IR and ¹H NMR spectroscopic data to be established, which will be key to the future interpretation of the spectra of more complex organic–inorganic materials containing boronate building blocks.     

Unprecedented Electron‐Poor Octahedral Ta6 Clusters in a Solid‐State Compound: Synthesis,Characterisations and Theoretical Investigations of Cs2BaTa6Br15O3

The crystal structure of Cs₂BaTa₆Br₁₅O₃ has been elucidated by using synchrotron X‐ray powder diffraction and absorption experiments. It is built from edge‐bridged octahedral [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^4? cluster units with a singular poor metallic electron (ME) count equal to thirteen. This leads to a paramagnetic behaviour related to one unpaired electron. The arrangement of the Ta₆ clusters is similar to that of Cs₂LaTa₆Br₁₅O₃ exhibiting 14‐MEs per [(Ta₆${{\rm Br}{{{\rm i}\hfill \atop 9\hfill}}}$ ${{\rm O}{{{\rm i}\hfill \atop 3\hfill}}}$ )${{\rm Br}{{{\rm a}\hfill \atop 6\hfill}}}$ ]^5? motif. The poorer electron‐count cluster presents longer metal–metal distances as foreseen according to the electronic structure of edge‐bridged hexanuclear cluster. Density functional theory (DFT) calculations on molecular models were used to rationalise the structural properties of 13‐ and 14‐ME clusters. Periodic DFT calculations demonstrate that the electronic structure of these solid‐state compounds is related to those of the discrete octahedral units. Oxygen–barium interactions seem to prevent the geometry of the octahedral cluster to strongly distort, allowing stabilisation of this unprecedented electron‐poor Ta₆ cluster in the solid state.     

Mixed Oligoureas Based on Constrained Bicyclic and Acyclic β‐Amino Acids Derivatives: On the Significance of the Subunit Configuration for Folding

The combination of a non‐functionalized constrained bicyclo[2.2.2]octane motif along with urea linkages allowed the formation of a highly rigid 2.5_12/14 helical system both in solution and the solid state. In this work, we aimed at developing stable and functionalized systems as promising materials for biological applications in investigating the impact of this constrained motif and its configuration on homo and heterochiral mixed‐oligourea helix formation. Di‐, tetra‐, hexa‐, and octa‐oligoureas alternating the highly constrained bicyclic motif of (R) or (S) configuration with acyclic (S)‐β³‐amino acid derivatives were constructed. Circular dichroism (CD), NMR experiments, and the X‐ray crystal structure of the octamer unequivocally proved that the alternating heterochiral R/S sequences form a stable left‐handed 2.5‐helix in contrast to the mixed (S/S)‐oligoureas, which did not adopt any defined secondary structure. We observed that the (?)‐synclinal conformation around the C_α? C_β bond of the acyclic residues, although sterically less favorable than the (+)‐synclinal conformation, was imposed by the (R)‐bicyclic amino carbamoyl (BAC) residue. This highlighted the strong ability of the BAC residue to drive helical folding in heterochiral compounds. The role of the stereochemistry of the BAC unit was assessed and a model was proposed to explain the misfolding of the S/S sequences.     

Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.