Effect of annealing on structural, optical and electrical properties of nanostructured Ge thin films

Ge thin films with a thickness of about 110 nm have been deposited by electron beam evaporation of 99.999% pure Ge powder and annealed in air at 100-500 °C for 2 h. Their optical, electrical and structural properties were studied as a function of annealing temperature. The films are amorphous below an annealing temperature of 400 °C as confirmed by XRD, FESEM and AFM. The films annealed at 400 and 450 °C exhibit X-ray diffraction pattern of Ge with cubic-F structure. The Raman spectrum of the as-deposited film exhibits peak at 298 cm⁻¹, which is left-shifted as compared to that for bulk Ge (i.e. 302 cm⁻¹), indicating nanostructure and quantum confinement in the as-deposited film. The Raman peak shifts further towards lower wavenumbers with annealing temperature. Optical band gap energy of amorphous Ge films changes from 1.1 eV with a substantial increase to ∼1.35 eV on crystallization at 400 and 450 °C and with an abrupt rise to 4.14 eV due to oxidation. The oxidation of Ge has been confirmed by FTIR analysis. The quantum confinement effects cause tailoring of optical band gap energy of Ge thin films making them better absorber of photons for their applications in photo-detectors and solar cells. XRD, FESEM and AFM suggest that the deposited Ge films are composed of nanoparticles in the range of 8-20 nm. The initial surface RMS roughness measured with AFM is 9.56 nm which rises to 12.25 nm with the increase of annealing temperature in the amorphous phase, but reduces to 6.57 nm due to orderedness of the atoms at the surface when crystallization takes place. Electrical resistivity measured as a function of annealing temperature is found to reduce from 460 to 240 Ω-cm in the amorphous phase but drops suddenly to 250 Ω-cm with crystallization at 450 °C. The film shows a steep rise in resistivity to about 22.7 KΩ-cm at 500 °C due to oxidation. RMS roughness and resistivity show almost opposite trends with annealing in the amorphous phase.     

Fabrication of titanium dioxide nanofibers containing hydroxyapatite nanoparticles

In the present study, we introduce titanium dioxide (TiO₂) nanofibers that contain hydroxyapatite (HAp) nanoparticles (NPs) as a result of an electrospinning process. A simple method that does not depend on additional foreign chemicals has been employed to synthesize HAp NPs through calcination of bovine bones. Typically, a colloidal gel consisting of titanium isopropoxide/HAp was prepared to produce nanofibers embedded with solid NPs by electrospinning process. The SEM results confirmed well oriented nanofibers and good dispersion of HAp NPs over the nanofibers. XRD results demonstrated well crystalline feature of both TiO₂ and HAp. Physiochemical aspects of prepared nanofibers were characterized for TEM and TEM-EDS which confirmed nanofibers were well oriented and had good dispersion of HAp NPs. Accordingly, these results strongly recommend the use of obtained nanofiber mats as a future candidate for hard tissue engineering applications.     

Elastic,electronic and optical properties of cotunnite TiO2 from first principles calculations

The ultrasoft pseudopotential technique is used to explore the elastic, electronic and optical properties of cotunnite TiO₂ using LDA and GGA proposed by Perdew Wang (PW91), Perdew–Burke–Ernzerhof (PBE) functional as defined by Wu and Cohen (PBEWC) and PBE functional for solids (PBESOL). The calculated elastic constants bulk modulus, shear modulus and Young’s modulus are in agreement with the previous theoretical reports. From our investigated shear anisotropy factors (A₁, A₂, and A₃), we infer that cotunnite TiO₂ is strong anisotropy in case of A₁ and A₂ and less anisotropy in case of A₃. The value of mean sound speed and Debye temperature are calculated using the obtained values of elastic moduli. The calculated structural parameters are in accord with the reported experiment and theoretical results. Our obtained values of direct bandgaps show an improvement over the other previous theoretical reports. The values of the dielectric constant (ε₁(ω)) of cotunnite TiO₂ calculated within LDA and GGA approximations are 7.655 (LDA (CA-PZ)), 7.578 (GGA (PW91)), 7.685 (GGA (WC)) and 7.655 (GGA (PBESOL)), which are slightly higher than the experimental values of rutile (6.69) and anatase (6.55) polymorphs. The obtained values of the refractive index are consistent with rutile TiO₂ and higher than anatase phase. The investigated imaginary part of dielectric constant and absorption spectrum reflect that the cotunnite TiO₂ is a weak photocatalytic material as compared to anatase and similar to rutile phases.     

Effect of Hydrophilic/Hydrophobic Block Ratio and Temperature on the Surface and Associative Properties of Oxyethylene and Oxybutylene Diblock Copolymers in Aqueous Media

Recent development in dispersion science and technology demands block copolymers with a variable block length and composition. To highlight that purpose, the surface active, associative, colloidal, and thermodynamic behavior of three diblock copolymers having different hydrophilic to hydrophobic ratio is reported here. Using surface tension and light scattering measurements, the micellization and adsorption behavior of polyoxyethylene and polyoxybutylene diblock copolymers of the type E_mB_n have been analyzed. Critical micelle concentration (CMC) and related thermodynamic parameters like free energy (ΔG_mic), enthalpy (ΔH_mic), and entropy (ΔS_mic) of micellization were calculated from CMC value using the closed association model. Likewise, the surface active parameters, like surface excess concentration (Γ₂), area per molecule (A₂), and thermodynamic parameters such as free energy (ΔG_ads), enthalpy (ΔH_ads), and entropy (ΔS_ads) of adsorption of polymer at the air/water interface, were also calculated at various temperatures. Static and dynamic light scattering techniques were employed for the determination of the weight-average molar (M_w), association number (N_w), polymer–water interaction (A₂), and micellar size in terms of hydrodynamic radii (R_h) of copolymer micelles. The effect of block length and solution temperature on the surface and micellar properties of these copolymers was also investigated.     

Comparison of urinary iodide determination in female thyroid patients by two techniques

Iodine deficiency affects a substantial portion of the world’s population, provoking severe health problems as well as important economic losses to the region in which this condition is found. In present study, evaluated the levels of urinary iodide (UI) and thyroid hormone status in female hypothyroid patients (HPs) and control subjects of same age group 16–30 years. The UI in HPs was measured by means of a Potentiometric method after microwave-assisted acid digestion, and compared the results with those obtained by the Sandell-Kolthoff method. The validity and accuracy was checked by using certified reference materials. The significantly lower concentration of iodide in the urine samples of the female goiter patients were observed as compared to control/referents subjects (p < 0.001). Serum thyroid status thyroid stimulating hormone, free triiodothyronine and free thyroxin were significantly lower in female patients as compared to control females (p < 0.003). The proposed method was relatively rapid, precise, accurate, efficient, as well as cost effective by using inexpensive equipment.     

A Comparison of the Gene Expression Profiles of Non-Alcoholic Fatty Liver Disease between Animal Models of a High-Fat Diet and Methionine-Choline-Deficient Diet

Non-alcoholic fatty liver disease (NAFLD) embraces several forms of liver disorders involving fat disposition in hepatocytes ranging from simple steatosis to the severe stage, namely, non-alcoholic steatohepatitis (NASH). Recently, several experimental in vivo animal models for NAFLD/NASH have been established. However, no reproducible experimental animal model displays the full spectrum of pathophysiological, histological, molecular, and clinical features associated with human NAFLD/NASH progression. Although methionine-choline-deficient (MCD) diet and high-fat diet (HFD) models can mimic histological and metabolic abnormalities of human disease, respectively, the molecular signaling pathways are extremely important for understanding the pathogenesis of the disease. This review aimed to assess the differences in gene expression patterns and NAFLD/NASH progression pathways among the most common dietary animal models, i.e., HFD- and MCD diet-fed animals. Studies showed that the HFD and MCD diet could induce either up- or downregulation of the expression of genes and proteins that are involved in lipid metabolism, inflammation, oxidative stress, and fibrogenesis pathways. Interestingly, the MCD diet model could spontaneously develop liver fibrosis within two to four weeks and has significant effects on the expression of genes that encode proteins and enzymes involved in the liver fibrogenesis pathway. However, such effects in the HFD model were found to occur after 24 weeks with insulin resistance but appear to cause less severe fibrosis. In conclusion, assessing the abnormal gene expression patterns caused by different diet types provides valuable information regarding the molecular mechanisms of NAFLD/NASH and predicts the clinical progression of the disease. However, expression profiling studies concerning genetic variants involved in the development and progression of NAFLD/NASH should be conducted.     

Preconcentration of rifampicin prior to its efficient spectroscopic determination in the wastewater samples based on a nonionic surfactant

Every year, tuberculosis affects the lungs of millions of people and rifampicin is the commonly used medicine for its treatment due to its antibiotic nature. The frequent use of rifampicin may lead to its increased concentration in the water resources. This research work is focused on the cloud point extraction (CPE) procedure for the preconcentration of rifampicin prior to its determination in water. The UV/vis spectrophotometric method was adapted for the measurement of rifampicin content after the phase separation. Triton-X 100 was used as the nonionic surfactant which contains hydrophilic polyethylene chain feasible for the extraction of analyte. Various analytical parameters that can affect the extraction efficacy were optimized to achieve linearity of the proposed method in the concentration range of 3.54–81.41 mgL^–1. The Limit of detection and quantification were 1.261 and 4.212 mgL^–1, respectively. The Preconcentration factor was 40 with relative standard deviation (%RSD) of 2.504%. The standard addition methodology was adopted for the validation of this procedure and effectively applied for the determination of rifampicin in real wastewater samples.     

Recent Theoretical and Experimental Advancements of Aluminum-Sulfur Batteries

Aluminum-sulfur batteries (AlSBs) exhibit significant potential as energy storage systems due to their notable attributes, including a high energy density, cost-effectiveness, and abundant availability of aluminum and sulfur. In order to commercialize AlSBs, an understanding of their working principles is necessary. In this review, we examine the current advancements in cathodes, both in theory and practice, as well as the progress made in aqueous and nonaqueous electrolytes. We also explore the modifications made to separators and the theoretical understanding of problems associated with AlSBs. Furthermore, we discuss future research directions aimed at resolving these issues. Our aim is to summarize the current progress in AlSBs and, based on recent progress and understanding of the mechanism, help design a battery to overcome the challenges that such batteries have been facing.     

Application of one-step inner-recycling counter-current chromatography for the preparative separation and purification of chemical constituents from the rhizome of Bergenia ciliate (haw.) Sternb

Bergenia ciliata (haw.) Sternb, the renowned pharmaceutical plant in Jammu and Kashmir of Pakistan, is widely applied in treating different illnesses including diabetes, diarrhea, and vomiting. This work employed an efficient one-step inner-recycling counter-current chromatography for preparative separating and purifying compounds with similar partition coefficients from the rhizome of Bergenia ciliate (haw.). Five compounds, including quercetin rhamnodiglucoside ( 1 ), quercetin-3-O-rutinoside ( 2 ), bergenine ( 3 ), kaempferol ( 4 ), and palmatic acid ( 5 ), were successfully separated using the optimized biphasic solvent system that contained ter-butylmetylether/n-butanol/acetonitrile/water (2:2:1:5, v/v) with the purities over 98%. Mass spectrometry and nuclear magnetic resonance were conducted for structural identification. As a result, our proposed strategy might be applied in separating compounds with similar partition coefficients, which was advantageous with regard to the less solvent and time consumption, and the increased number of theoretical plates.