Investigation of anthropic effects connected with metal ions concentration, organic matter and grain size in Bormida river sediments

An investigation on the sediment composition and grain size was carried out along the Bormida river (Piedmont, Northern Italy). The samples were taken both in the riverbed and on its banks. Multivariate statistical exploratory methods permitted to identify possible sources of primary pollution. In particular, principal component analysis (PCA) showed that there are probably at least three anthropogenic main causes of pollution, one connected with Cr, Ni and Sn, the second with cadmium and the last one with mercury. Some correlations were found between heavy metal ion concentrations and organic matter and/or the sediment grain size. Differences between the samples collected in the riverbed and on the banks were identified and the relationships between the principal components and the distance of the samples from the riverbed and from the hot spot represented by the ACNA industrial site were also analyzed.     

On the theoretical determination of the electron affinity of ozone

Summary Multiconfigurational electron correlation methods have been analyzed in order to theoretically compute the electron affinity (EA) of ozone. The near-degeneracy correlation effects, which are so important in O₃ and O ₃ ^– , have been described using complete active space (CAS) SCF wave functions. Remaining dynamic correlation effects are computed using second-order perturbation theory (the CASPT2 method). The best calculated adiabatic value (including zero-point energy corrections), 2.19 eV, is about 0.09 eV larger than the experimental value. Comparative studies using size-consistent coupled pair functional approaches (CPF and ACPF) have also been performed. The harmonic frequencies in O ₃ ^– have been determined to be: ₁=992, ₂=572, and ₃=879 cm^–1, which gives a zero-point energy of 0.151 eV.     

Fluorescence spectroscopy for monitoring deterioration of extra virgin olive oil during heating

The potential of fluorescence spectroscopy for characterizing the deterioration of extra virgin olive oil (EVOO) during heating was investigated. Two commercial EVOO were analysed by HPLC to determine changes in EVOO vitamin E and polyphenols as a result of heating at 170°C for 3 h. This thermal oxidation of EVOO caused an exponential decrease in hydroxytyrosol and vitamin E (R²=0.90 and 0.93, respectively) whereas the tyrosol content was relatively stable. At the same time, amounts of preformed hydroperoxides (ROOH), analysed by an indirect colorimetric method, decreased exponentially during the heating process (R²=0.94), as a result of their degradation into secondary peroxidation products. Fluorescence excitation spectra with emission at 330 and 450 nm were recorded to monitor polyphenols and vitamin E evolution and ROOH degradation, respectively. Partial least-squares calibration models were built to predict these indicators of EVOO quality from oil fluorescence spectra. A global approach was then proposed to monitor the heat charge from the overall fluorescence fingerprint. Different data pretreatment methods were tested. This study indicates that fluorescence spectroscopy is a promising, rapid, and cost-effective approach for evaluating the quality of heat-treated EVOO, and is an alternative to time-consuming conventional analyses. In future work, calibration models will be developed using a wide range of EVOO samples.     

Amperometric method for determining the degree of complexation of polyelectrolytes with cationic surfactants

The complexation of sodium polystyrene sulfonate with monovalent cationic surfactants at a microsized liquid/liquid interface has been studied using electrochemistry. The method is based on measurement of surfactant ion transfer across the interface between two immiscible electrolyte solutions (ITIES). The complexation of various cationic surfactants (alkylpyridinium- and trimethylammonium-) with oligosized polystyrene sulfonate was measured. Binding isotherms were used to determine the degree of binding as a function of the surfactant chain length and type of head group. It was found that the hydrophobicity of the surfactant was the predominant factor. The effect of the polyelectrolyte chain length on the binding mechanism was studied using cetylpyridinium chloride as a complexing agent. It was found that binding affinity, as well as cooperativity of the binding process, decreases with decreasing polyelectrolyte chain length. Thermodynamics of surfactant binding was measured using titration microcalorimetry. The thermodynamic data obtained show that the enthalpy of surfactant binding is not dependent on polymer chain length, but an increase in chain length makes the binding process entropically more favorable.     

Regiocontrolled synthesis of enantiopure 3,3'-thiosubstituted biphenyls

Sulfenylation of 6,6'-dimethoxy-2,2'-dihydroxybiphenyl, used as a racemic mixture and single enantiomers, by phthalimidesulfenyl chloride afforded the corresponding 3,3'-N,N'-dithiophthalimide with complete regioselectivity. Simple manipulations of the latter compound allowed access to the corresponding bis-thiol or o-thioquinone as useful intermediates for the synthesis of new sulfur-containing open-chain and macrocyclic C(2) enantiopure ligands. The application of this methodology to the preparation of a biphenyl bearing two cysteine units as potential HIV-1 protease inhibitor is also described.     

Solvent-free,microwave-assisted synthesis of thiophene oligomers via Suzuki coupling

The purpose of this study was to obtain a rapid, efficient, and environmentally friendly methodology for the synthesis of highly pure thiophene oligomers. The solvent-free, microwave-assisted coupling of thienyl boronic acids and esters with thienyl bromides, using aluminum oxide as the solid support, allowed us to rapidly check the reaction trends on changing times, temperature, catalyst, and base and easily optimize the experimental conditions to obtain the targeted product in fair amounts. This procedure offers a novel, general, and very rapid route to the preparation of soluble thiophene oligomers. Thus, for example, quaterthiophene was obtained in 6 min by reaction of 2-bromo-2,2'-bithiophene with bis(pinacolato)diboron (isolated yield 65%), whereas quinquethiophene was obtained in 11 min by reaction of dibromoterthiophene with thienylboronic acid (isolated yield 74%). The synthesis of new chiral 2,2'-bithiophenes is reported. The detailed analysis of the byproducts of some reactions allowed us to elucidate a few aspects of reaction mechanisms. While the use of microwaves proved to be very convenient for the coupling between conventional thienyl moieties, the same was not true for the coupling of thienyl rings to thienyl-S,S-dioxide moieties. Indeed, in this case, the targeted product was obtained in low yields because of the competitive, accelerated, Diels-Alder reaction that affords a variety of condensation products.     

A simplified approach to the determination of N-nitroso glyphosate in technical glyphosate using HPLC with post-derivatization and colorimetric detection

A simple and sensitive HPLC post-derivatization method with colorimetric detection has been developed for the determination of N-nitroso glyphosate in samples of technical glyphosate. Separation of the analyte was accomplished using an anionic exchange resin (2.50 mm × 4.00 mm i.d., 15 μm particle size, functional group: quaternary ammonium salt) with Na₂SO₄ 0.0075 M (pH 11.5) (flow rate: 1.0 mL min⁻¹) as mobile phase. After separation, the eluate was derivatized with a colorimetric reagent containing sulfanilamide 0.3% (w/v), [N-(1-naphtil)ethilendiamine] 0.03% (w/v) and HCl 4.5 M in a thermostatized bath at 95 °C. Detection was performed at 546 nm. All stages of the analytical procedure were optimized taking into account the concept of analytical minimalism: less operation times and costs; lower sample, reagents and energy consumption and minimal waste. The limit of detection (k = 3) calculated for 10 blank replicates was 0.04 mg L⁻¹ (0.8 mg kg⁻¹) in the solid sample which is lower than the maximum tolerable accepted by the Food and Agriculture Organization of the United Nations.     

In situ tissue pathology from spatially encoded mass spectrometry classifiers visualized in real time through augmented reality

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data. Spatially encoded pathology classifications are displayed at the site of laser sampling as color-coded pixels in an augmented reality video feed of the surgical field of view. This is enabled by two-way communication between surgical navigation and mass spectrometry data analysis platforms through a custom-built interface. Performance of the system was evaluated using murine models of human cancers sampled in situ in the presence of body fluids with a technical pixel error of 1.0 ± 0.2 mm, suggesting a 84% or 92% (excluding one outlier) cancer type classification rate across different molecular models that distinguish cell-lines of each class of breast, brain, head and neck murine models. Further, through end-point immunohistochemical staining for DNA damage, cell death and neuronal viability, spatially encoded PIRL-MS sampling is shown to produce classifiable mass spectral data from living murine brain tissue, with levels of neuronal damage that are comparable to those induced by a surgical scalpel. This highlights the potential of spatially encoded PIRL-MS analysis for in vivo use during neurosurgical applications of cancer type determination or point-sampling in vivo tissue during tumor bed examination to assess cancer removal. The interface developed herein for the analysis and the display of spatially encoded PIRL-MS data can be adapted to other hand-held mass spectrometry analysis probes currently available.

Integration between a hand-held mass spectrometry desorption probe based on picosecond infrared laser technology (PIRL-MS) and an optical surgical tracking system demonstrates in situ tissue pathology from point-sampled mass spectrometry data.     

Synthesis and Characterization of Three Homoleptic Bismuth Silanolates: [Bi(OSiR3)3] (R = Me,Et, iPr)

The bismuth tris(triorganosilanolates) [Bi(OSiR₃)₃] ( 1 , R = Me; 2 , R = Et; 3 , R = iPr) were prepared by reaction of R₃SiOH with [Bi(OtBu)₃]. Compound 1 crystallizes in the triclinic space group with Z = 2 and the lattice constants a = 10.323(1) Å, b = 13.805(1) Å, c = 21.096(1) Å and α = 91.871(4)°, β = 94.639(3)°, γ = 110.802(3)°. In the solid state compound 1 is a trimer as result of weak intermolecular bismuth‐oxygen interactions with Bi–O distances in the range 2.686(6)–3.227(3) Å. The coordination at the bismuth atoms Bi(1) and Bi(3) is best described as 3 + 2 coordination whereas Bi(2) shows a 3 + 3 coordination. The intramolecular Bi–O distances fall in the range 2.041(3)–2.119(3) Å. Compound 3 crystallizes in the orthorhombic space group Pbcm with Z = 4 and the lattice constants a = 7.201(1) Å, b = 23.367(5) Å and c = 20.893(1) Å, whereas the triethylsilyl‐derivative 2 is liquid. In contrast to [Bi(OSiMe₃)₃] ( 1 ) compound 3 is monomeric in the solid state, but shows similar intramolecular Bi–O distances in the range 1.998(2)–2.065(5) Å. The bismuth silanolates are highly soluble in common organic solvents and strongly moisture sensitive. Compound 1 shows the lowest thermal stability.     

A theoretical study on the low-lying excited states of 2,2':5',2'-terthiophene and 2,2':5',2':5',2'-quaterthiophene.

The nature and properties of the low-lying singlet and triplet valence excited states of 2,2':5',2'-terthiophene (terthiophene) and 2,2':5',2':5',2'-quaterthiophene (tetrathiophene) are discussed on the basis of high-level ab initio computations. The spectroscopic features determined experimentally for short alpha-oligothiophenes are rationalised on theoretical grounds. Special attention is devoted to the nonradiative decay process through intersystem crossing (ISC) from the singlet to the triplet manifold, which is known to be relatively less efficient in tetrathiophene. Along the geometry relaxation of the S1 state of terthiophene, the S1 and T2 states become degenerate, which leads to a favourable situation for the occurrence of ISC. The parallel process is expected to be less favoured in tetrathiophene because of the less efficient spin-orbit coupling and the increase of the S1-T2 energy gap.