Dynamically coating the capillary with 1-alkyl-3-methylimidazolium-based ionic liquids for separation of basic proteins by capillary electrophoresis

Ionic substances with melting points close to room temperature are referred to as ionic liquids. Because ionic liquids are environmentally benign and are good solvents for a wide range of both organic and inorganic materials, interest for their potential uses in different chemical processes is increasing. In this paper, a capillary electrophoretic method for the analysis of basic proteins including lysozyme, cytochrome c, trypsinoge, and α-chymotyypsinogen A is reported. The method, in which 1-alkyl-3-methylimidazolium-based ionic liquids are used as the running electrolytes, leads to a surface charge reversal on the capillary wall. The effects of the alkyl group, imidazolium counterion, and the concentration of the ionic liquids were discussed. The optimum buffer system was a 90 mM 1-ethyl-3-methylimidazolium tetrafluoroborate (1E-3MI-TFB) solution. The applied voltage was −15 kV and detection was performed by monitoring absorbance at 240 nm. Baseline separation, high efficiencies, and symmetrical peaks of four proteins were obtained. The R.S.D. values of migration times and peak areas were <0.68 and <3.0%, respectively. The separation mechanism seems to involve association between the imidazolium cations and the proteins.     

冰晶石-氧化铝熔体结构的计算机模拟研究

用Monte Carlo法对冰晶石-氧化铝系熔体结构作了计算机模拟研究。结果表明: 熔体中既有含“氧桥”和“氟桥”的“多核”离子集团, 如F3Al-O-AlF_3、F_3Al-AlF_3、F_3Al—F—AlF_3—F等; 也有“单核”离子集团如AlF_5~(2-)、AlOF_3~(2-)等。熔体中还存在较松散的xNa~+·yF~-离子集团。熔体中不存在AlO_2~-或AlO_3~(3-)集团。     

An integrated console for capsule-based,automated organic synthesis

The current laboratory practices of organic synthesis are labor intensive, impose safety and environmental hazards, and hamper the implementation of artificial intelligence guided drug discovery. Using a combination of reagent design, hardware engineering, and a simple operating system we provide an instrument capable of executing complex organic reactions with prepacked capsules. The machine conducts coupling reactions and delivers the purified products with minimal user involvement. Two desirable reaction classes – the synthesis of saturated N-heterocycles and reductive amination – were implemented, along with multi-step sequences that provide drug-like organic molecules in a fully automated manner. We envision that this system will serve as a console for developers to provide synthetic methods as integrated, user-friendly packages for conducting organic synthesis in a safe and convenient fashion.

Using a combination of reagent design, hardware engineering, and a simple operating system we provide an instrument capable of executing complex organic reactions using prepacked capsules with minimal user involvement.     

Triangular halogen trimers. A DFT study of the structure, cooperativity, and vibrational properties

Triangular halogen trimers (RX)3, where X = Br, I and R represents H, H3C, H2FC, HF2C, F3C, CH2=CH, CH[triple bond]C, and Ph, have been investigated using the density functional theory in the Perdew, Burke, and Ernzerhof method. We report herein the optimized geometries of the stable structures, their vibrational frequencies, and binding energies with the two- and three-body terms. All trimer structures possess a cyclic array of halogen atoms in the type II approach by virtue of the nonspherical atomic charge distribution around the halogens. The Br...Br interactions in trimers are very weak, whereas the I...I interactions in trimers are relatively stronger. While all bromine trimers and most of iodine trimers are predicted to be noncooperative, three of iodine trimers show weak cooperativity. The analysis of vibration modes reveals that all halogen trimers exhibit no especially remarkable frequency shifts. It is also shown that the electrostatic contribution plays a major role in the halogen...halogen interactions in halogen trimers. In contrast to bromine trimers, the relative contribution of charge-transfer component to the halogen...halogen interactions becomes more important for iodine trimers.     

Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.     

Pyrazoles as molecular probes to study the properties of co-crystals by solid state NMR spectroscopy

Equimolar mixtures of 3,5-dimethylpyrazole (1) with four NH-imidazoles (2–5) have been studied by¹³C and ¹⁵N CPMAS NMR and by DSC. In three cases, the solid mixture behaves as the sum of the individual components [imidazole (2), 2-methylimidazole (3) and 2,4(5)-dimethylimidazole (5)]. In one case [4,5-dimethylimidazole (4)], the mixture corresponds to a new species in which the dynamic behavior of1 no longer exists.     

Pt／钇稳定氧化锆固体电解质在高温下的电化学性质

用交流阻抗技术研究了二电极、三电极Ｐｔ／钇稳定氧化锆（简称ＹＳＺ）高温固体电化学体系．开路电位下，Ｐｔ／ＹＳＺ体系只有一个阻抗半圆，对应于电极体系的电化学活化控制过程，极化电阻随温度变化的表观活化能为１７１．５ｋＪ／ｍｏｌ．Ｐｔ／ＹＳＺ界面的双电层电容约为３００μＦ／ｃｍ２．阳极极化下，交流阻抗极化电阻显著减小；阴极极化下，极化电阻反而增大，并出现浓差控制现象．     

Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.