Pentacoordinate nickel(II) complexes double bridged by phosphate ester or phosphinate ligands: spectroscopic, structural, kinetic, and magnetic studies

The bis(phosphatediester)-bridged complexes [[Ni([12]aneN(3))(mu-O(2)P(OR)(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), 2,4,4-trimethyl-1,5,9-triazacyclododec-1-ene; R=Me (1), Bu (2), Ph (3), Ph-4-NO(2) (4); [12]aneN(3)=Me(4)[12]aneN(3), 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene; R=Me (5), Bu (6), Ph (7), Ph-4-NO(2) (8)] were prepared by hydrolysis of the phosphate triester with the hydroxo complex [[Ni([12]aneN(3))(mu-OH)](2)](PF(6))(2) or by acid-base reaction of the dialkyl or diaryl phosphoric acid and the above hydroxo complex. The acid-base reaction was also used to synthesise the phosphinate-bridged complexes [[Ni([12]aneN(3))(mu-O(2)PR(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), R=Me (9), Ph (10); [12]aneN(3)=Me(4)[12]aneN(3), R=Me (11), Ph (12)]. The molecular structures of complexes 2, 3 and 12 were established by single crystal X-ray diffraction studies. The eight-membered rings defined by the nickel atoms and the bridging ligands show distorted twist-boat, chair and boat-boat conformations in 2, 3 and 12, respectively. The experimental susceptibility data for compounds 2, 3 and 12 were fitted by least-squares methods to the analytical expression given by Ginsberg. The best fit was obtained with values of J=-0.11 cm(-1), D=-9.5 cm(-1) and g=2.20 for 2; J=-0.97 cm(-1), D=-9.3 cm(-1) and g=2.21 for 3; and J=-0.14 cm(-1), D=-11.9 cm(-1) and g=2.195 for 12. The magnetic-exchange pathways must involve the phosphate/phosphinate bridges, because these favour antiferromagnetic interactions. The observation of a higher exchange parameter for compound 3 is a consequence of a favourable disposition of the O-P-O bridges. The kinetics for the hydrolysis of TNP (tris(4-nitrophenyl)phosphate) with the dinuclear nickel(II) hydroxo complex [[Ni(Me(3)[12]aneN(3))(mu-OH)](2)](PF(6))(2) was studied by UV-visible spectroscopy. The proposed mechanism for TNP-promoted hydrolysis can be described as one-substrate/two-product, and can be fitted to a Michaelis-Menten equation.     

Heteronuclear Nickel‐Iron Complexes and the Crystal Structure of [Fe2(CO)6(μ3‐S)2{Ni(dppe)}]

A series of heteronuclear nickel‐iron complexes [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(PPh₃)₂}] ( 1 ), [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(dppe)}] ( 2 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(PPh₃)₂}] ( 3 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(dppe)}] ( 4 ) and [Fe₂(CO)₆(μ‐SPh)(μ₃‐S){NiCl(dppe)}] ( 5 ) have been prepared. The structure of 4 has been determined by X‐ray crystallography. The central metal‐sulfur core of 4 has a trigonal bipyramidal shape with a NiFe₂ base plane with two axial sulfur atoms. Each iron atom is 5‐coordinate forming a distorted square pyramid; the nickel is square planar coordinated by two sulfur atoms and two phosphorus atoms.     

Autoignition temperature: comprehensive data analysis and predictive models

ABSTRACT

Here we report a new predictive model for autoignition temperature (AIT), an important physical parameter widely used to assess potential safety hazards of combustible materials. Available structure-AIT data extracted from different sources were critically analysed. Support vector regression (SVR) models on different data subsets were built in order to identify a reliable compound set on which a realistic model could be built. This led to a selection of the dataset containing 875 compounds annotated with AIT values. The thereupon-based SVR model performs reasonably well in cross-validation with the determination coefficient r ² = 0.77 and mean absolute error MAE = 37.8°C. External validation on 20 industrial compounds missing in the training set confirmed its good predictive power (MAE = 28.7°C).     

Electrochemical and Photochemical Conversion of [Ru3Ir(μ 3-H)(CO)13] into [Ru3Ir(μ-H)3(CO)12]

Electrochemical and photochemical properties of the tetrahedral cluster [Ru₃Ir( ₃-H)(CO)₁₃] were studied in order to prove whether the previously established thermal conversion of this cluster into the hydrogenated derivative [Ru₃Ir(-H)₃(CO)₁₂] also occurs by means of redox or photochemical activation. Two-electron reduction of [Ru₃Ir( ₃-H)(CO)₁₃] results in the loss of CO and concomitant formation of the dianion [Ru₃Ir( ₃-H)(CO)₁₂]^2–. The latter reduction product is stable in CH₂Cl₂ at low temperatures but becomes partly protonated above 283K into the anion [Ru₃Ir(-H)₂(CO)₁₂]^– by traces of water. The dianion [Ru₃Ir( ₃-H)(CO)₁₂]^2– is also the product of the electrochemical reduction of [Ru₃Ir(-H)₃(CO)₁₂] accompanied by the loss of H₂. Stepwise deprotonation of [Ru₃Ir(-H)₃(CO)₁₂] with Et₄NOH yields [Ru₃Ir(-H)₂(CO)₁₂]^– and [Ru₃Ir( ₃-H)(CO)₁₂]^2–. Reverse protonation of the anionic clusters can be achieved, e.g., with trifluoromethylsulfonic acid. Thus, the electrochemical conversion of [Ru₃Ir( ₃-H)(CO)₁₃] into [Ru₃Ir(-H)₃(CO)₁₂] is feasible, demanding separate two-electron reduction and protonation steps. Irradiation into the visible absorption band of [Ru₃Ir( ₃-H)(CO)₁₃] in hexane does not induce any significant photochemical conversion. Irradiation of this cluster in the presence of CO with _irr>340nm, however, triggers its efficient photofragmentation into reactive unsaturated ruthenium and iridium carbonyl fragments. These fragments are either stabilised by dissolved CO or undergo reclusterification to give homonuclear clusters. Most importantly, in H₂-saturated hexane, [Ru₃Ir( ₃-H)(CO)₁₃] converts selectively into the [Ru₃Ir(-H)₃(CO)₁₂] photoproduct. This conversion is particularly efficient at _irr >340nm.     

Supercritical fluid extraction of polycyclic aromatic hydrocarbons from liver samples and determination by HPLC-FL

An extraction/clean-up procedure by SFE was developed for isolating PAHs from liver samples for subsequent HPLC-FL determination of ten PAHs in the enriched extract. Recoveries (90-115%) and RSD % (< or =7.7) were satisfactory. When applied to 11 samples of bird of prey (Tyto alba) protected species and classified of special interest, from the Galicia (Northwest to Spain), benzo[ghi]perylene and indeno[1,2,3-cd]pyrene were undetectable; chrysene and benzo[a]pyrene are only detected in one sample; benzo[a]anthracene and benzo[k]fluoranthene are only quantified in one sample and benzo[b]fluoranthene in two samples. The other PAHs, anthracene, fluoranthene and pyrene are present in almost all the samples.     

Photochemistry of bicyclo[2.2.2]oct-7-ene-2,5-diones and the corresponding 5-hydroxyimino and 5-methylene derivatives

Synthesis and photochemistry of several title compounds 1-3 containing multiple chromophoric systems are described. The Diels-Alder reactions of 2,6,6-trimethylcyclohexa-2,4-dienone (5) with acetylenes 6a-d provided the adducts 7a-d, which upon hydrolysis furnished the desired bicyclo[2.2.2]octenediones 1a-d. Oximes 2a-d were prepared from diones 1a-d by treatment with hydroxylamine hydrochloride in pyridine. 5-Methylenebicyclo[2.2.2]oct-7-en-2-ones 3a-d were obtained via chemoselective Wittig reaction of the corresponding diones 1a-d. Bicyclo[2.2.2]octenediones 1a-c underwent chemoselective oxa-di-pi-methane rearrangement under sensitized conditions and suffered formal ketene extrusion upon direct irradiation. Direct irradiation of 1d afforded 11d via formal ketene extrusion but under sensitization it remained unchanged. Oximes 2a-d suffered ketene extrusion upon direct irradiation and E/Z isomerization under sensitized conditions. On the other hand, 5-methylenebicyclo[2.2.2]oct-7-en-2-ones 3a-d generally underwent 1,3-acyl shift. The plausible courses of all these photochemical processes are discussed.     

Electrochemical Sensing of Uric Acid Using Glassy Carbon Modified with Multiwall Carbon Nanotubes Dispersed in Polyethylenimine

This work reports the advantages of using glassy carbon electrodes modified with multiwall carbon nanotubes (MWCNT) dispersed in polyethylenimine (PEI). The presence of MWCNTs wrapped by PEI largely facilitated the strong adsorption of uric acid (UA) and allowed its highly sensitive and selective quantification even in the presence of high excess of ascorbic acid. The selected conditions for the electrochemical sensing were 5 s accumulation at ?0.300 V under stirring and quantification in a 0.050 M phosphate buffer solution pH 7.40 by differential pulse voltammetry adsorptive‐stripping after medium exchange. The platform allowed the successful application in the quantification of UA in urine.     

Polyarginine nanocapsules: a new platform for intracellular drug delivery

This report describes the development of a new nanocarrier, named as polyarginine (PArg) nanocapsules, specifically designed for overcoming cellular barriers. These nanocapsules are composed of an oily core and a PArg corona. The attachment of the PArg corona was mediated by its interaction with the oily core, which was conveniently stabilized with phosphatidylcholine. Hybrid PArg/PEG nanocapsules could also be obtained by introducing PEG-stearate in the nanocapsules formation process. The nanocapsules had an average size in the range of 120–160 nm, and a positive surface charge, which varied between +56 and +28 mV for PArg and PArg/PEG nanocapsules, respectively. They could accommodate significant amounts of lipophilic drugs, i.e., docetaxel, in their core, and also polar negatively charged molecules, i.e., plasmid DNA, on their coating. As a preliminary proof-of-principle, we explored the ability of these nanocarriers to enter cancer cells and to inhibit proliferation in the non-small cell lung cancer NCI-H460 cell line, using flow cytometry and confocal microscopy analysis. The results indicated that PArg nanocapsules are rapidly and massively accumulated into the NCI-H460 cells and that the PArg shell plays a critical role in the internalization process. Moreover, the incubation with docetaxel-loaded nanocapsules with NCI-H460 cells led to an enhanced inhibition of their proliferation, as compared to the free drug. Overall, this is the first report of the potential of PArg nanocapsules as intracellular drug delivery vehicles.