Resolution of benzo[a]pyrene in complex mixtures of other polycyclic aromatic hydrocarbons. Comparison of two spectrofluorimetric methods applied to water samples

Two spectrofluorimetric methods, second-derivative constant-energy synchronous luminescence (SDCESL) and constant-wavelength synchronous luminescence (CWSL) in combination with multiple linear regression (MLR), for the quantification of benzo[a]pyrene (BaP) at sub-ng mL-1 levels, in the presence of benzo[b]fluoranthene (BbFt), benzo[k]fluoranthene (BkFt), benzo[ghi]perylene (BghiP) and indeno[1,2,3-cd]pyrene (IP), were developed and compared in detail. SDCESL presents lower limits of detection and quantification than CWSL/MLR and also gives more exact and precise results for levels close to the quantification limit. For BaP, SDCESL achieved quantification limits of 0.019 ng mL-1 in river waters and 0.007 ng mL-1 in drinking waters. This work offers a sensitive, precise, accurate, rapid, simple and economic methodology for monitoring BaP in waters for public consumption, meeting all the requirements of the EC Directive 98/83/CE that fixes the maximum admissible limit for this polycyclic aromatic hydrocarbon in drinking waters at of 0.010 ng mL-1.     

Relaxation response of polymers containing highly flexible side groups monitored by broadband dielectric spectroscopy

The relaxation behavior of poly(5-acryloxymethyl-5-methyl-1,3-dioxacyclohexane), a polymer containing highly flexible side groups, is studied by broadband dielectric spectroscopy in the frequency and temperature ranges 10(-1)-10(9) Hz and 123-473 K, respectively. Above the glass transition temperature T(g) the dielectric loss in the frequency domain exhibits a prominent alpha absorption, followed in increasing order of frequencies by two secondary absorptions called beta and gamma. At temperatures slightly higher than T(g), the a relaxation is well separated from the beta, but as temperature increases overlapping between both relaxations augments forming an alphabeta absorption in the vicinity of 420 K. This latter absorption displays a shoulder on its high-frequency side corresponding to the y relaxation. The strength of the a relaxation decreases with increasing temperature, eventually vanishing at the temperature at which the alphabeta absorption is formed. The time retardation spectra of the isotherms are calculated and further used to facilitate the deconvolution of the overlapping relaxations. The fact that the temperature dependence of the beta relaxation also describes that of the alphabeta absorption suggests that both relaxations have the same nature. It seems that as temperature increases, the a relaxation feeds on the beta absorption until its complete disappearance. The gamma relaxation, in turn, seems to increase at the expense of the alphabeta process at high temperature.     

Disorder effects in Mn12–acetate at 83 K

The structure of hexadeca‐μ‐acetato‐tetra­aqua­dodeca‐μ₃‐oxo‐dodecamanganese bis(acetic acid) tetrahydrate, [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄]·2CH₃COOH·4H₂O, known as Mn₁₂–acetate, has been determined at 83 (2) K by X‐ray diffraction methods. The fourfold (S₄) molecular symmetry is disrupted by a strong hydrogen‐bonding interaction with the disordered acetic acid mol­ecule of solvation, which displaces one of the acetate ligands in the cluster. Up to six Mn₁₂ isomers are potentially present in the crystal lattice, which differ in the number and arrangement of hydrogen‐bonded acetic acid mol­ecules. These results considerably improve the structural information available on this molecular nanomagnet, which was first synthesized and characterized by Lis [Acta Cryst. (1980), B 36 , 2042–2046].     

Time-resolved electron paramagnetic resonance of photoinduced ion pairs in blends of polythiophene and fullerene derivatives

Substituted polythiophene and triethylenglycolpyrrolidino-C(60) blends are examined by time-resolved electron paramagnetic resonance (TR-EPR) at different temperatures. TR-EPR spectra recorded on the microsecond time scale after a short laser pulse are assigned to polythiophene and fullerene radical ion pairs, generated by electron transfer from the excited state of polythiophene to fullerene. At low temperatures, TR-EPR spectra show polarized lines with an antiphase emission/absorption pattern. The origin of the polarization pattern is described in the frame of spin correlated radical pair theory, in which two unpaired electron spins (on radical cation and anion, respectively) interact through isotropic spin exchange and anisotropic dipolar interactions. The polarization pattern is accounted for assuming a singlet excited state as the precursor of the charge-separated state. Spectral simulations yield dipolar and spin exchange coupling constants between unpaired electrons of the radical ion pair. Their values correspond to a mean distance between opposite charges of 22 A. When the temperature is increased, the spectra gradually loose their antiphase character and eventually consist of a signal totally in emission. This behavior is explained by a polarization mechanism involving a spin-selective charge recombination (ST(-1) mixing). The polarization pattern at different temperatures is examined in detail, and its generating mechanism is discussed.     

New routes to beta-cycloalkylalanine derivatives using serine-derived organozinc reagents

Two distinct routes to beta-cycloalkylalanine derivatives have been developed. The first route employs the reaction of the iodoalanine-derived zinc-copper reagent 2 with cycloalk-1-en-3-yl phosphates, and the second uses the palladium-catalysed coupling of the iodoalanine-derived zinc reagent 1 with cycloalkenyl triflates; in each case, catalytic hydrogenation of the unsaturated product leads to the protected beta-cycloalkylalanine. The latter route allows access to a range of cycloalkyl derivatives, with ring sizes of 5-8. beta-(1-Methyl-1-cyclohexyl)alanine may be prepared using reaction of the zinc-copper reagent 2 with 3-methyl-2-cyclohexenyl chloride, followed by hydrogenation. The corresponding cyclopentyl derivative may be prepared by reaction of the same zinc-copper reagent 2 with diethyl geranylphosphate, followed by ring-closing metathesis and hydrogenation.     

The reactions of some halogenated pyridines with methoxide and methanethiolate ions in dimethylformamide

The reactions of 2,6- and 2,5-dibromopyridines and of 2,3- and 3,5-dichloropyridines with sodium isopropanethiolate and methanethiolate afforded the products of mono- or of bis-substitution depending on the experimental conditions. The same pyridines reacted with sodium methoxide to give good yields of the mono-substituted products; bis-substitution occurred easily only in the case of the 2,6-dibromo- and of the 3,5-dichloropyridine. The syntheses of some methoxy thiomethoxypyridine, starting from the halogeno methoxypyridines or from the halogeno thiomethoxypyhdines are also described. The bis-(alkylthio)pyridines can be fragmented by sodium in HMPA to give the bis(mercapto)pyridines.     

Air monitoring of volatile aromatic compounds by means of long-term exposure diffusive samplers

Results obtained by using "Analyst", a long-term diffusive sampler, in some monitoring campaigns, performed for the determination of benzene and the volatile aromatic pollutants, in five cities of the Italian Umbria Region and at the city of Forlì, are presented and discussed. First results of an inter comparison between the "Analyst" and "radial-type" diffusive samplers, carried out by the Regional Agency for the Ambient Protection (ARPA) of Forlì, point out substantial advantages with the long-time sampling devices.     

Adsorption and thermal condensation mechanisms of amino acids on oxide supports. 1. Glycine on silica

Glycine was adsorbed on the surface of a well-defined silica from aqueous solutions of variable concentrations and pHs. The adsorbed molecules were characterized using middle-IR and UV-vis-NIR spectroscopies. Except at the lowest pH (2.0), they were predominantly present on the surface as zwitterions. Two successive deposition mechanisms were evidenced with increasing glycine concentration. At low concentrations, glycine is specifically adsorbed on silica surface sites, probably through its NH3+ moiety. The pH dependence suggests that these sites may be silanolate groups (approximately equal to Si-O-). At higher concentrations, specific adsorption sites are saturated and surface-induced precipitation of beta-glycine is observed. The thermal reactivity of adsorbed/deposited glycine was then investigated by thermogravimetric analysis, in situ diffuse reflectance IR spectroscopy, and thermoprogrammed desorption coupled with mass spectrometry. Adsorbed glycine molecules react to form peptide bonds at a temperature considerably lower than that for bulk crystalline alpha-glycine. The main reaction product is the cyclic dimer diketopiperazine, with no evidence of the linear dimer. The activation mechanism is not diffusionally limited; the formation of "surface acyls", previously proposed for related systems, has not been evidenced here. These findings are of relevance for the evaluation of prebiotic peptide synthesis scenarios.     

Controlling the self-assembly of a deoxiguaninosine on mica

We report a tapping mode scanning force microscopy investigation on the growth from solutions of a lipophilic deoxiguanosine derivative on the basal plane of a muscovite mica surface. By varying the chemical composition of the substrate surface it is possible to drive the self-assembly towards either layered thin films, which are very likely to consist of guanosine quartets, or nanoribbons, comprising hydrogen bonded networks. Both these two architectures, which are peculiar to the guanine base itself, are of notable importance for the fabrication of molecular nanowires. Moreover, the first arrangement provides evidence that the guanosine is able to behave as ionophore, thus, suggesting its utilization in the development of solid-state ion selective sensors.