Second-derivative constant-wavelength synchronous scan spectrofluorimetry for determination of benzo[b]fluoranthene, benzo[a]pyrene and indeno[1,2,3-cd]pyrene in drinking water

The use of derivative constant-wavelength synchronous scan fluorimetry is reported for the determination of three polycyclic aromatic hydrocarbon pollutants in drinking water (linearity range 0.4-4 mug 1(-1)). The limits of detection (LD) and quantification (LQ) (mug 1(-1)) are 0.01 and 0.07 for benzo[b]fluoranthene, 0.03 and 0.12 for benzo[a]pyrene and 0.19 and 0.57 for indeno[1,2,3-cd]pyrene in the presence of three other pollutants, benzo[k]fluoranthene, benzo[ghi]perylene and fluoranthene. The precision (RSD /= 85%) were satisfactory.     

Collection and analytical characterisation of the atmospheric particulate in the city of Bari

In this paper an application of new procedures for atmospheric particulate analysis is illustrated. PM10, PAHs (benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[j]fluoranthene (BjF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1, 2, 3-cd]pyrene (Ip), dibenzo[a, h]anthracene (DbA)) and heavy metals (Cu, Ni, Zn, Co, Mn, Cd, Fe and Pb) were investigated. PM10 determination was performed by gravimetric method, PAHs were measured by GC-MS, and heavy metals by HPIC. An air quality monitoring campaign on the territory of Bari municipality has been organised, and its results are shown.     

Validation of a method for extraction of polycyclic aromatic hydrocarbons from sewage sludge and analysis by GC-MS

In the present study, the solid–liquid extraction with low temperature purification was validated for the determination of 16 polycyclic aromatic hydrocarbons from sewage sludge by gas chromatography-mass spectrometry. Recoveries ranged 70–114% for naphthalene, acenaphthylene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene and chrysene, while the compounds benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenzo[a,h]anthracene and benzo[g,h,i]perylene showed recoveries of between 40 and 70%. The relative standard deviation was less than 13% for all of the compounds. Negative matrix effect was observed on the 10 compounds with less retention time in the chromatographic analysis and positive matrix effect noticed on the others. The limits of quantification were from 2 to 20 μg kg^?1, about 30 times less than the maximum residue limit allowed in sludge by the European Union. The validated method produced quantification of 11 PAHs in one sludge sample at concentrations ranging 20–2000 μg kg^?1.     

Resolution of 13 polycyclic aromatic hydrocarbons by constant-wavelength synchronous spectrofluorometry.

A method capable of determining 13 PAHs (acenaphthene, anthracene, benzo[a]anthracene, benzo[a]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, chrysene, dibenzo[ah]anthracene, fluoranthene, fluorene, indene[1,2,3-cd]pyrene, phenanthrene and pyrene) in a mixture of 16 EPA PAHs by second derivative synchronous spectrofluorometry in the constant wavelength mode was developed. It has not been possible to determine the following PAHs in the mixture: acenaphthylene, benzo[ghi]perylene and naphthalene. The approach studied allows the sensitive, rapid and inexpensive identification and quantitation of 13 PAHs in a solution of hexane. The detection limits are <1 microg L(-1) (except for chrysene and phenanthrene).     

Application of the effects of solvent and dissolved oxygen on the determination of benzo[a]pyrene by constant-wavelength synchronous spectrofluorimetry in smoke-flavouring

This work studies the effects of solvent and of dissolved oxygen in the determination of benzo[a]pyrene (BaP) by constant-wavelength synchronous spectrofluorimetry in smoke-flavour agents, as confirmation and quantification techniques. The wavelength of the most intense peak at the optimum excitation-emission wavelength interval (20 or 110 nm in most of nine solvents) varied by up to 5 nm, and the detection and quantification limits by a factor of up to 30. The best quantification limit was obtained with DMSO (0.09 mug l(-1)). The deoxygenation of the analyte solution decreased detection and quantification limits, by a variable factor (8-1.13 in the case of n-hexane and DMSO, respectively).     

Fast sequential injection determination of benzo[A]pyrene using variable angle fluorescence with on-line solid-phase extraction

A methodology for the analysis of drinking water for one of the most potent carcinogenic agents known; benzo[a]pyrene (BaP), in the presence of other interfering PAHs is presented. The methodology described is based on the sequential injection analysis of the sample on to a microcolumn (containing 5 mg of C18) where extraction and preconcentration of BaP takes place, followed by elution of BaP with 1 ml of 1,4-dioxane and subsequent detection by using variable angle fluorescence. The advantages of the method include the small amount of stationary phase employed together with the possibility of re-using the phase in order to carry out a large number of injections without the need for column re-packing. Also noteworthy is the small volume of 1,4-dioxane used to elute the BaP retained on the column and the small sample volumes required (9-10 ml) for achieving detection limits at the ng l-1 level. Thus, a methodology for BaP determination is obtained which complies with the requirements of the 98/83/EC Directive which fixes a maximum admissible concentration for this pollutant in waters for public consumption of 10 ng l-1. The variable angle spectra obtained are further processed by means of the multiple linear regression technique. The detection limit for BaP is 2.5 ng l-1, and the linear range is between 7.5 and 280 ng l-1.     

Admicelle-enhanced synchronous fluorescence spectrometry for the selective determination of polycyclic aromatic hydrocarbons in water

A simple and rapid method for the highly sensitive determination of polycyclic aromatic hydrocarbons (PAHs) in water was developed. Benzo[a]pyrene, benzo[k]fluoranthene, perylene, and pyrene in water were concentrated into sodium dodecyl sulfate (SDS)-alumina admicelles. The collection was performed by adding SDS and alumina particles into the sample solution at pH 2. After gentle mixing, the resulting suspension was passed through a membrane filter to collect the SDS admicelles containing highly concentrated PAHs. The filter was placed on a slide glass and then covered admicellar layer with a fused silica glass plate before setting in a fluorescence spectrometer. Benzo[a]pyrene, benzo[k]fluoranthene, perylene, and pyrene were selectively determined by the synchronous fluorescence scan (SFS) analysis with keeping wavelength intervals between excitation and emission to 98, 35, 29, and 45 nm, respectively. Because of the minimum spectral overlapping, 1-40 ng l⁻¹ of benzo[a]pyrene, benzo[k]fluoranthene, and perylene as well as 10-150 ng l⁻¹ of pyrene were selectively determined with eliminating the interferences of other 12 PAHs. The detection limits were 0.3 ng l⁻¹ for benzo[a]pyrene, benzo[k]fluoranthene, and perylene, and 1 ng l⁻¹ for pyrene. They were 2-3 orders of magnitude lower than the detection limits in normal aqueous micellar solutions. The application to water analysis was studied.     

Optimization of the matrix solid-phase dispersion sample preparation procedure for analysis of polycyclic aromatic hydrocarbons in soils: comparison with microwave-assisted extraction

A fast and simple preparation procedure based on the matrix solid-phase dispersion (MSPD) technique is proposed for the first time for the isolation of 16 polycyclic aromatic hydrocarbons (PAHs) from soil samples. Naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benz[a]anthracene, chrysene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, dibenzo[a,h]anthracene, benzo[g,h,i]perylene, and indeno[1,2,3-c,d]pyrene were considered in the study. Extraction and clean-up of samples were carried out in a single step. The main parameters that affect extraction yield, such as dispersant, type and amount of additives, clean-up co-sorbent and extractive solvent were evaluated and optimized. The addition of an alkali solution in MSPD was required to provide quantitative recoveries. Analytical determinations were carried out by high performance liquid chromatography (HPLC) with fluorescence detection. Quantification limits (between 0.01 and 0.6 ng g(-1) dry mass) were well below the regulatory limits for all the compounds considered. The extraction yields for the different compounds obtained by MSPD were compared with the yields obtained by microwave-assisted extraction (MAE). To test the accuracy of the MSPD technique, the optimized methodology was applied to the analysis of standard reference material BCR-524 (contaminated industrial soil), with excellent results.     

气相色谱-串联质谱法同时测定卷烟滤嘴中15种多环芳烃

建立了气相色谱-串联质谱同时检测卷烟滤嘴中15种多环芳烃的方法。卷烟滤嘴用二氯甲烷振荡萃取后,经0.22μm有机相滤膜过滤,采用DB-5MS色谱柱(30 m×0.25 mm,0.25μm)进行分离,电子轰击源、正离子模式下以多反应监测模式进行检测,内标法进行定量。15种多环芳烃(苊烯、苊、芴、菲、蒽、荧蒽、芘、苯并[a]蒽、屈、苯并[b]荧蒽、苯并[k]荧蒽、苯并[a]芘、二苯并[a,h]蒽、苯并[g,h,i]苝和茚并[1,2,3-c,d]芘)的线性关系良好,相关系数(R~2)为0.991 4~0.999 9。15种多环芳烃在低、中、高3个添加水平下的平均回收率为81.6%~111.2%;除了芴在低添加水平时相对标准偏差为19.2%外,其他相对标准偏差均小于16%。15种多环芳烃的检出限为0.02~0.24 ng/滤嘴,定量限为0.04~0.80 ng/滤嘴。方法前处理简便,具有快速、准确、灵敏度高及重复性好的优点,适用于卷烟滤嘴中多环芳烃的分析。     

Fluorescence optosensors based on different transducers for the determination of polycyclic aromatic hydrocarbons in water

This paper presents the development of two optosensors for the determination of four polycyclic aromatic hydrocarbons (anthracene, benzo[a]pyrene, fluoranthene and benzo[b]fluoranthene) using a photomultiplier device and an intensified coupled charge device (ICCD) as optical transducers, respectively. These optosensors are based on the on-line immobilization of the analytes onto a non-ionic resin solid support (Amberlite XAD-4) in a continuous flow system, followed by the measurement of their native fluorescence. The determinations were performed using 15 mM H₂PO₄^-/HPO₄^2- buffer solution at pH 7 and 25% 1,4-dioxane. Detection limits were 6.4 and 9.3 for ANT, 3.3 and 2.5 for BbF, 1.4 and 13.2 for FLT, and 1.7 and 7.8 for BaP using optosensor 1 or 2, respectively. Relative standard deviations were 7.9 and 6.7 for ANT at 50 ng mL^-1, 3.5 and 7.4 for BbF at 60 ng mL^-1, 3.6 and 8.9 for FLT at 50 ng mL^-1, and 6.7 and 11.6 for BaP at 50 ng mL^-1 using optosensor 1 or 2, respectively. Finally, a critical comparison between the two configurations based on different transducers (photomultiplier and ICCD) for resolving and simultaneously determining mixtures of the polycyclic aromatic hydrocarbons under study in water samples (tap and mineral waters) were carried out.     

A simple method for the determination of benzo[a]pyrene and benzo[k]fluoranthene in a mixture

Atmospheric particulate matter is routinely analysed for the concentration of the carcinogen benzo[a]pyrene (BaP). Benzo[k]fluoranthene (BkF) has identical spectral characteristics and interferes in the fluorimetric estimation. A simple method for the determination of BaP in the presence of BkF is described. Based on quenching of the fluorescence of BaP by the addition of small amounts of nitromethane, the method can be used for accurate estimation for wide concentration ratios of BaP to BkF ranging from 0.1 to 10.0.     

Determination of nanogram/kilogram levels of polycyclic aromatic hydrocarbons in foods by HPLC with fluorescence detection

Methodology was developed for the determination of eight polycyclic aromatic hydrocarbons (PAH) in five food categories including meat/fish, dried dairy products, cereals, leafy vegetables and vegetable/marine oils. The eight PAH were fluoranthene, benzo[a]anthracene, benzo[k]fluoranthene, benzo[b]fluoranthene, benzo[a]pyrene, 7,12-dimethylbenzo[a]anthracene, dibenzo[ah]anthracene and dibenzo[ai]pyrene. Samples were digested with alcoholic KOH followed by partitioning into solvents such as cyclohexane or isooctane. Lipids and other interferences were removed by solvent partitioning with dimethylformamide or dimethylsulfoxide/water. Additional cleanup involving column chromatography on silica gel, Florisil or Sephadex LH-20 was employed as required. Reversed-phase chromatography with gradient elution and fluorescence detection was employed for the determinations. Confirmation was carried out by GC-MS/SIM. Detection limits ranged from 2-90 ng/kg depending on the PAH and food analyzed. Results of a small survey indicated that the meat/fish category had the highest levels (low microgram/kg, on average) of the foods studied.     

腐殖酸磁固相萃取与高效液相色谱-荧光检测联用测定食用油中的苯并芘

采用简单的混合研磨方法制备磁性腐殖酸(MHAS)复合材料,并将其作为磁固相萃取的吸附剂选择性分离和富集食用油脂中的苯并芘(BaP)。结合高效液相色谱-荧光检测法(HPLC-FLD),建立了食用油中BaP检测的新方法。该方法整个样品前处理过程在15min内即可完成,对目标物BaP的检测限低至0.04ng/g,在0.1~100ng/g范围内线性良好(R=0.999),日内(n=5)和日间(n=3)相对标准偏差分别小于3.5%和15.8%。将该方法应用于多种食用油中BaP的检测,每种食用油中均有不同含量的BaP被检出,对12种常见食用油的加标回收率在74.2%至120.6%之间,相对标准偏差小于11.0%。     

Determination of Benzo(a)Pyrene and other Polynuclear Aromatic Hydrocarbons in Airborne Particulate Material by Ultrasonic Extraction and Reverse Phase High Pressure Liquid Chromatography

Abstract

Ultrasonic extraction of airborne particulate material on Hi-Vol filters is described. Almost all of the polar compounds are removed during the extraction by adsorption on the surface of the shredded glass fibers and controlled pore glass powder (CPG). The non-polar polynuclear aromatic hydrocarbons (PAH) in the extract are separated at room temperature by high pressure liquid chromatography (HPLC) on reverse phase Vydac using acetonitrile:water (70:30 v/v) as the chromatographic solvent. There is baseline separation of benzo(a)pyrene (BaP), benzo(k)fluoranthene (BkFt) and of benzo(e)pyrene (BeP), benzo(b)fluoranthene and perylene, the latter three present in one band. Extracts of airborne particulates show the same peaks. BaP elutes in approximately 14 minutes. Precision and accuracy measurements indicate full recovery of PAH and good extraction reproducibility. The detection limit of BaP at F 290/389 is less than 10 pg. Total analysis time is approximately 1 1/2 hr, most of which is waiting time.     

大气漂尘中苯并[a]芘的简单同步荧光测定

通过选择合适的能量差(Δ-υ=1 400 cm-1),建立了大气漂尘中苯并[a]芘的恒能量同步荧光分析法。苯并[a]芘在甲醇与十二烷基磺酸钠(SDS)溶液中均有良好的线性关系(R>0.999),检出限分别达到1.34 nmol/L与0.40 nmol/L。该法亦可应用于18种多环芳烃混合物中苯并[a]芘的鉴别。     

Determination of polycyclic aromatic hydrocarbons in Athens atmosphere

Concentrations of total suspended particulates (TSP), benzene soluble fraction (BSF) and polycyclic aromatic hydrocarbons (PAH) have been determined in ambient air from four different sites in Athens, situated in urban, semi-industrial and industrial areas. GLC analysis has been applied for the determination of PAH, while the CGC/MS technique was used in order to confirm the obtained results. The same PAH pattern was observed for all stations. The identified PAH have been fluoranthene (FLA), pyrene (PYR), benzo(a)anthracene (BaA), chrysene (CHR), benzo(b)fluoranthene (BbF), benzo(k)fluoranthene (BkF), benzo(a)pyrene (BaP), benzo(e)pyrene (BeP) and benzo(ghi)perylene (B(ghi)P). The concentrations of individual PAH ranged from traces to 33 ng m-3 (e.g. same or lower comparing to other large cities). The higher values of PAH were found during adverse meteorological conditions.     

Highly sensitive routine method for urinary 3-hydroxybenzo[a]pyrene quantitation using liquid chromatography-fluorescence detection and automated off-line solid phase extraction

Many workers and also the general population are exposed to polycyclic aromatic hydrocarbons (PAHs), and benzo[a]pyrene (BaP) was recently classified as carcinogenic for humans (group 1) by the International Agency for Research on Cancer. Biomonitoring of PAHs exposure is usually performed by urinary 1-hydroxypyrene (1-OHP) analysis. 1-OHP is a metabolite of pyrene, a non-carcinogenic PAH. In this work, we developed a very simple but highly sensitive analytical method of quantifying one urinary metabolite of BaP, 3-hydroxybenzo[a]pyrene (3-OHBaP), to evaluate carcinogenic PAHs exposure. After hydrolysis of 10 mL urine for two hours and concentration by automated off-line solid phase extraction, the sample was injected in a column-switching high-performance liquid chromatography fluorescence detection system. The limit of quantification was 0.2 pmol L(-1) (0.05 ng L(-1)) and the limit of detection was estimated at 0.07 pmol L(-1) (0.02 ng L(-1)). Linearity was established for 3-OHBaP concentrations ranging from 0.4 to 74.5 pmol L(-1) (0.1 to 20 ng L(-1)). Relative within-day standard deviation was less than 3% and relative between-day standard deviation was less than 4%. In non-occupationally exposed subjects, median concentrations for smokers compared with non-smokers were 3.5 times higher for 1-OHP (p<0.001) and 2 times higher for 3-OHBaP (p<0.05). The two urinary biomarkers were correlated in smokers (ρ=0.636; p<0.05; n=10) but not in non-smokers (ρ=0.09; p>0.05; n=21).     

Determination of Polycyclic Aromatic Hydrocarbons in Camellia Oil by Gel Permeation and High-Performance Liquid Chromatography

A rapid method for the quantification of polycyclic aromatic hydrocarbons in camellia oil is reported. The analytes were extracted from camellia oil using 1:1 (v/v) cyclohexane/ethyl acetate, isolated by gel permeation chromatography, and determined by high-performance liquid chromatography with fluorescence detection. The method features good sensitivity, as the limits of quantification were from 0.33 to 0.67 microgram per kilogram, which are lower than those of regulatory maximum residue limits. Intra- and inter-day precision ranged from 1.19 to 4.52 percent and 1.86 to 3.56 percent, respectively. The recoveries were 79.3–87.9, 85.3–93.4, and 89.6–97.3 percent at fortified levels of 10, 25, and 50 microgram per kilogram, respectively. Moreover, the method is rapid, requiring less than three hours, in comparison to traditional approaches, which require more than twenty-four hours. The developed method was also inexpensive in terms of solvent use and employed to determine polycyclic aromatic hydrocarbons in five camellia oil products. High concentrations of acenaphthene, benz[a]anthracene, benzo[b]fluoranthene, benzo[k]fluoranthene, and benzo[a]pyrene were present in samples produced through extrusion and high temperature pressing. The results suggest that camellia oil processing should be monitored to minimize the presence of polycyclic aromatic hydrocarbons.     

Combination of micellar extraction of polycyclic aromatic hydrocarbons from aqueous media with detection by synchronous fluorescence

Summary The application of different non-ionic surfactants for the micellar extraction and enrichment of PAHs from aqueous media was tested. Recoveries were up to 100%. A spectroscopic method for the simultaneous detection of PAH-mixtures by synchronous fluorescence in the micellar phase was developed, with detection limits of 6.8 and 2.6 ng/l for benzo(k)fluoranthene and benzo(a)pyrene, respectively. The method was applied to the extraction and detection of benzo(k)fluoranthene/benzo(a)pyrene mixtures from aqueous solutions and soil suspensions. Genapol X-80 was found to suppress PAH-adsorption on bentonite at surfactant concentrations above 0.1%.Dedicated to Prof. Dr. V. Krivan on the occasion of his 60th birthday.     

Optimization of the extraction of polycyclic aromatic hydrocarbons from wood samples by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for benzo[a]anthracene, benzo[e]pyrene, benzo[b]fluoranthene, benzo[k]fluoranthene and benzo[a]pyrene in wood samples. The spiked wood used was prepared 3 months before analysis to simulate weathering processes and to allow the formation of analyte-matrix interaction. The samples, immersed in acetonitrile were irradiated with microwaves in a closed-vessel system. Optimization of the method was achieved by using a factorial design approach on parameters such as extraction time, temperature and sample amount. The analysis of extracts has been carried out by reversed-phase high-performance liquid chromatography with fluorescence detection for quantification and UV-diode-array detection for confirmation. The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps.