铜修饰微电极阵列硝酸根检测（英文）

许多水域含有过量的硝酸根,会诱发许多问题。采用微机电系统工艺,制备出一种基于铂叉指微电极阵列的硝酸根离子(NO-3)检测微传感电极。通过电化学恒电位沉积法在铂叉指微电极阵列上修饰,得到多孔、簇状铜敏感膜。采用线性扫描伏安电化学检测方法,考察该微传感电极对NO-3的响应性能,在0~2mg/L浓度范围内,线性度为0.999,灵敏度为-3.15μA·L·mg-1。在相同沉积修饰条件下,叉指微电极比同等敏感面积(1mm2)的圆盘微电极表现出更强的催化活性和更高的灵敏度,分析其原因,认为主要是叉指微电极的结构和边缘效应造成的。     

Superthermostability of nanoscale TIC-reinforced copper alloys manufactured by a two-step ball-milling process

A Cu-TiC alloy, with nanoscale TiC particles highly dispersed in the submicron-grained Cu matrix, was manufactured by a self-developed two-step ball-milling process on Cu, Ti and C powders. The thermostability of the composite was evaluated by high-temperature isothermal annealing treatments, with temperatures ranging from 727 to 1273 K. The semicoherent nanoscale TiC particles with Cu matrix, mainly located along the grain boundaries, were found to exhibit the promising trait of blocking grain boundary migrations, which leads to a super-stabilized microstructures up to approximately the melting point of copper (1223 K). Furthermore, the Cu-TiC alloys after annealing at 1323 K showed a slight decrease in Vickers hardness as well as the duplex microstructure due to selective grain growth, which were discussed in terms of hardness contributions from various mechanisms.     

Miscibility and crystallization behaviors of stereocomplex-type poly(l- and d-lactide)/poly(methyl methacrylate) blends

Stereocomplex-poly(l- and d-lactide) (sc-PLA) and poly(methyl methacrylate) (PMMA) blends were prepared by solution blending at PMMA loadings from 20 to 80 mass%. The miscibility and crystallization behaviors of the blends have been studied in detail by differential scanning calorimeter. The single-glass transition temperatures (T _g) of the blends demonstrated that the obtained system was miscible in the amorphous state. It was observed that the crystallization peak temperature of sc-PLA/PMMA blends was marginally lower than that of neat sc-PLA at various cooling rates, indicating the dilution effect of PMMA on the sc-PLA component to restrain the overall crystallization process. In the study of isothermal crystallization kinetics, the reciprocal value of crystallization peak time ( \( t_{\text{p}}^{ - 1} \) ) decreased with increasing PMMA content, indicating that the addition of non-crystalline PMMA inhibited the isothermal crystallization of sc-PLA at an identical crystallization temperature (T _c). Moreover, the negative value of Flory–Huggins interaction parameter (χ ₁₂ = ?0.16) of the blend further indicated that sc-PLA and PMMA formed miscible blends.     

Aliphatic Organoimido Derivatives of Polyoxometalates Containing a Bioactive Ligand

A series of aliphatic organoimido derivatives of hexamolybdate based on amantadine, namely (nBu₄N)₂[Mo₆O₁₈(?NC₁₀H₁₅)] ( 1 ), (nBu₄N)₂ {cis‐[Mo₆O₁₇(?NC₁₀H₁₅)₂]} ( 2 ), (nBu₄N)₂{trans‐[Mo₆O₁₇(?NC₁₀H₁₅)₂]} ( 3 ), and (nBu₄N)₂[Mo₆O₁₆(?NC₁₀H₁₅)₃] ( 4 ), was synthesized in reasonable yield by dehydration with N,N′‐dicyclohexylcarbodiimide (DCC). They were characterized by IR and UV/Vis spectroscopy, elemental analysis, ESI mass spectrometry, and single‐crystal X‐ray structure analysis. The spectral and structural similarities and differences between monosubstituted, cis‐disubstituted, and trans‐disubstituted organoimido derivatives were elucidated and may provide guidance for related work on organoimido‐functionalized Lindqvist‐type polyoxometalates. In addition, trans‐disubstituted and polysubstituted derivatives containing aliphatic organoimido ligands have not yet been reported, and the crystal structure of the trans isomer may lead us to a deeper understanding of disubstituted derivatives. Furthermore, proliferation and morphology of MCF‐7 cells were studied with compound 1 . The present results show that the DCC‐dehydrating protocol could be an efficient approach to covalently graft bioactive ligands such as amantadine onto POMs and enhance their application in clinical cancer treatment.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

Catalytic epoxidation of alkenes over supported manganese oxide with hydrogen peroxide: effect of supports and manganese loading

Manganese oxides supported on γ-Al₂O₃, amorphous SiO₂, MCM-41, and TiO₂ prepared by an impregnation method were used as heterogeneous catalysts for epoxidation of alkenes with 30 % H₂O₂ in the presence of NaHCO₃ aqueous solution. The effect of support and manganese loading on their activity was studied. The 1.3-MnO _x /γ-Al₂O₃ exhibited superior epoxidazing activity of styrene, compared with other supported MnO _x . Hydrogen temperature-programmed reduction, UV–vis and ESR analyses suggested that Mn²⁺ (catalytic activity species) dominated in 1.3 % MnO _x /γ-Al₂O₃ due to a strong interaction between MnO _x and γ-Al₂O₃. Recycling studies showed the catalyst was a heterogeneous one and retained its activity after recycling four times.     

Two-Coordinate Copper(I)/NHC Complexes: Dual Emission Properties and Ultralong Room-Temperature Phosphorescence

As a kind of photoluminescent material, Cu^I complexes have many advantages such as adjustable emission, variable structures, and low cost, attracting attention in many fields. In this work, two novel two-coordinate Cu^I-N-heterocyclic carbene complexes were synthesized, and they exhibit unique dual emission properties, fluorescence and phosphorescence. The crystal structure, packing mode, and photophysical properties under different conditions were systematically studied, proving the emissive mechanism to be the locally excited state of the carbazole group. Based on this mechanism, ultralong room-temperature phosphorescence (RTP) with a lifetime of 140 ms is achieved by selective deuteration of the carbazole group. These results deepen the understanding of the luminescence mechanism and design strategy for two-coordinate Cu^I complexes, and prove their potential in applications as ultralong RTP materials.     

光催化甲烷转化研究进展

甲烷催化转化为高附加值产物、实现甲烷高效利用,具有重要的研究意义及工业应用价值。长期以来,如何在较温和的条件下将甲烷转化为其它更有价值的有机衍生物,如醇、芳烃、长链烷烃和烯烃等,是催化、化学及化工领域的热点和难点课题之一。光催化反应由光能激发产生光生电子和空穴,参与到甲烷C―H键活化和自由基形成,这为低温甲烷转化提供新的途径,本文主要围绕甲烷氧化和偶联反应,总结了近年来光催化研究进展,并对如何进一步提高光催化性能提出展望。     

银薄层控制金纳米四足体的重塑和等离激元调谐

探究了溶液中不同温度以及不同溶液成分(I^-的引入)对金纳米四足体(GNTPs)重塑过程的影响，表明了GNTPs的重塑机制为Ostwald熟化，即弱结合的表面Au原子在高凸曲率区域溶解和在凹区域重新沉积。这种重塑过程可以随时通过镀银薄层在几秒内阻止，GNTPs的形貌可以在最大程度上得到很好的稳定，从而也可以防止其光学性质的演变。在此基础上，通过紫外可见近红外(UV-Vis-NIR)吸收光谱和基于同步辐射的小角X射线散射(SAXS)进一步研究了GNTPs/Ag的稳定性，并通过表面增强拉曼散射(SERS)光谱证实了GNTPs/Ag的光学响应。