Synthesis and characterization of nanomagnetite thermosets based on benzoxazines

Nanomagnetite thermosets were obtained by thermally activated ring opening copolymerization of benzoxazine groups coated on the surface of the nanomagnetite with bare benzoxazine. For this purpose, carboxylic acid containing 1,3‐benzoxazine was synthesized and covalently bonded on magnetite nanoparticles by postcoating method. The average size of benzoxazine coated nanoparticles was 40–100 nm as determined by Dynamic Light Scattering (DLS), Atomic Force Microscopy (AFM) and Transmission Electron Microscopy (TEM) measurements. The crystal structure of benzoxazine coated nanoparticles was shown to be magnetite by X‐ray diffraction (XRD) analysis. Thermally activated curing behavior of nanomagnetite‐benzoxazines has also been studied by differential scanning calorimetry (DSC). Magnetic and thermal properties of the cured samples were investigated. It was shown that the precursor nanomagnetite benzoxazine and cured samples exhibited typical ferromagnetic character with low coercivities between 1.5 and 2.5 Oe. The cured samples showed high thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6780–6788, 2008     

Spray‐processable thiazolothiazole‐based copolymers with altered donor groups and their electrochromic properties

Two novel thiazolo[5,4‐d]thiazole containing donor–acceptor type alternating copolymers, poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)thiophen‐2‐yl)‐5‐(thiophen‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzTh) and poly[2‐(5‐(2‐decyl‐2H‐benzo[d][1,2,3]triazol‐4‐yl)furan‐2‐yl)‐5‐(furan‐2‐yl)thiazolo[5,4‐d]thiazole] (BTzFr) were synthesized by Stille coupling polymerization and their electrochemical and electrochromic properties were explored. Electrochemical activities of the spray‐casted polymer films were determined by cyclic voltammetry. To evaluate the effect of thiophene and furan moieties on the optical properties of the copolymers, spectroelectrochemistry studies were performed. To examine the switching abilities, copolymer films were subjected to a double potential step chronoamperometry in their local maximum absorptions. Both thiazolothiazole‐containing copolymers showed multichromic properties with low band‐gap values 1.7 and 1.9 eV for BTzTh and BTzFr, respectively. The decent electrochromical properties together with solution processability make them important candidates for electrochromic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3901–3906     

Investigation of AlInN HEMT structures with different AlGaN buffer layers grown on sapphire substrates by MOCVD

We investigate the structural and electrical properties of Al_xIn_1–xN/AlN/GaN heterostructures with AlGaN buffers grown by MOCVD, which can be used as an alternative to AlInN HEMT structures with GaN buffer. The effects of the GaN channel thickness and the addition of a content graded AlGaN layer to the structural and electrical characteristics were studied through variable temperature Hall effect measurements, high resolution XRD, and AFM measurements. Enhancement in electron mobility was observed in two of the suggested Al_xIn_1?xN/AlN/GaN/Al_0.04Ga_0.96N heterostructures when compared to the standard Al_xIn_1–xN/AlN/GaN heterostructure. This improvement was attributed to better electron confinement in the channel due to electric field arising from piezoelectric polarization charge at the Al_0.04Ga_0.96N/GaN heterointerface and by the conduction band discontinuity formed at the same interface. If the growth conditions and design parameters of the Al_xIn_1?xN HEMT structures with AlGaN buffers can be modified further, the electron spillover from the GaN channel can be significantly limited and even higher electron mobilities, which result in lower two-dimensional sheet resistances, would be possible.     

pH‐responsive near‐infrared emitting conjugated polymer nanoparticles for cellular imaging and controlled‐drug delivery

In this article, pH‐responsive near‐infrared emitting conjugated polymer nanoparticles (CPNs) are prepared, characterized, and their stabilities are investigated under various conditions. These nanoparticles have capacity to be loaded with water insoluble, anticancer drug, camptothecin (CPT), with around 10% drug loading efficiency. The in vitro release studies demonstrate that the release of CPTs from CPNs is pH‐dependent such that significantly faster drug release at mildly acidic pH of 5.0 compared with physiological pH 7.4 is observed. Time and dose‐dependent in vitro cytotoxicity tests of blank and CPT‐loaded nanoparticles are performed by real‐time cell electronic sensing (RT‐CES) assay with hepatocellular carcinoma cells (Huh7). The results indicate that CPNs can be effectively utilized as vehicles for pH‐triggered release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 114–122     

Separation,optimization, and quantification of cytokinins by a recently developed amide-embedded stationary phase

In this study, some plant growth regulators known as cytokinins [kinetin (K), zeatin (Z), thidiazuron (TDZ), benzylaminopurine (BAP), and dimethylallylaminopurine (AAP)] were separated by HPLC using an amide-embedded mixed-mode stationary phase which was synthesized by Aral et al. in recent years. The effect of mobile phase content, mobile phase pH, buffer concentration, and temperature on separation process was studied. In addition, a quantitative determination of cytokinins from Salvia limbata extract was studied, and some validation parameters such as limit of detection (LOD), limit of quantification (LOQ), and relative standard deviation (RSD) were calculated as a range of 0.03–0.1, 0.1–0.26?mg/L, and 0.03–0.08, respectively.     

Fabrication of a Novel Polymeric Scaffold for Amperometric Laccase Biosensor

Present work displays the preparation of an electrochemical biosensor using a conjugated polymer and laccase enzyme for catechol quantification in samples. The biosensing system is based on an enzyme immobilization on polymer modified graphite transducer surface. For that purpose, a random conjugated polymer, thienothiophene‐benzoxadiazole‐alt‐benzodithiophene (BOTT), was coated onto a graphite electrode surface via drop casting method followed by immobilization of a biomolecule (laccase) for sensing experiments. Herein, for the first time, we proposed a BOTT polymer as an inexpensive and effective way to fabricate highly sensitive and fast response biosensors. The proposed sensing system possessed superior properties with 0.38 μM limit of detection and 110.81 μA mM^?1 sensitivity. Furthermore, cyclic voltammetry and scanning electron microscopy techniques were used to examine the surface modifications. The proposed system could be useful for many future studies for catechol quantification in environmental samples.© 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2333–2339     

Rolling resistance moment of microspheres on surfaces

In the current work, for the first time, the existence of a rolling moment of resistance of an adhesion bond between a microsphere and flat surface subjected to external dynamic force has been experimentally demonstrated. The rotational motion of spherical particles deposited on a wafer is excited in the 0–3.5?MHz range using a piezoelectric transducer. The approach is based on (i) the observation that the contribution of the rotational (rocking) motion to the axial displacement of the particle are few orders of magnitude higher than those of the purely axial motion and (ii) the existence of a relationship between the rotational natural frequency of the adhesion bond and the work of adhesion. The natural frequency of the rotational (rocking) motion is extracted from the low frequency components of the transient response of the particle in the axial direction, which is measured by a laser interferometer. The existing theoretical adhesion models for rolling resistance moment are evaluated using the experimental results. Good agreement between the theoretical predictions and experimental values is found.     

Effect of exopolymeric substances on the kinetics of sorption and desorption of trivalent chromium in soil

Laboratory batch sorption-desorption and column experiments were performed to better understand the effects of microbial exopolymeric substances (EPS) on Cr(III) sorption/desorption rates in the soil-water system. The experiments were carried out in two different modes: one mode (sorption) in which Cr(III) and EPS were applied simultaneously, and the other (desorption) included the sequential application of Cr(III) and EPS to the soil-water system. The batch sorption and desorption experiments showed that, while chromium(III) desorption was significantly enhanced in the presence of EPS relative to non-EPS-containing systems, the desorption rates were much smaller than the sorption rates, and the fraction dissolved by EPS accounted for only a small portion of the total chromium initially sorbed onto soil minerals. Similarly, the column experiments suggested that, while the microbial EPS led to an increase in Cr dissolution relative to non-EPS-containing systems, only a small portion of the total chromium initially added to the soil was mobilised. The differences observed in Cr sorption and desorption rates can be explained through the very low solubility and strong interactions of chromium species with soil minerals as well as the mass transfer effects associated with low diffusion rates. The overall results suggest that, while microbial EPS may play an important role in microbial Cr(VI) treatment in sub-surface systems due to the formation of soluble Cr-EPS complexes, the extent and degree of Cr mobilisation are highly dependent on the type of initial Cr sorption.