A Total Synthesis of FK-506(1)

A total synthesis of FK-506 (1) is presented. The synthesis features a highly convergent approach utilizing a block coupling strategy. Top and bottom half sections of the molecule are coupled by addition of a vinyl cuprate with a spiroenone. The alpha-allyl aldol functionality is revealed by a reductive opening of the spiroenone system. The labile alpha,beta-diketoamide hemiketal portion of the molecule is prepared by a late stage generation and oxidation of a masked enediol. Top and bottom half segments are themselves derived by coupling of smaller subunits, resulting in a very convergent route.     

Identification of inhibitors for UDP-galactopyranose mutase

The flavoenzyme uridine 5'-diphosphate (UDP)-galactopyranose mutase (UGM) plays a key role in the cell wall biosynthesis of many pathogens, including Mycobacterium tuberculosis. Using a synthetic fluorescent ligand, we screened 16 000 compounds in a fluorescence polarization assay. Effective inhibitors of UGM were identified.     

Gas chromatographic optimization studies on the side chain and ring regioisomers of methylenedioxymethamphetamine

Gas chromatographic (GC) optimization studies are conducted for the 10 methylenedioxyphenethylamine regioisomeric substances related to the drug of abuse 3,4-methylenedioxymethamphetamine (MDMA, Ecstasy). These 10 compounds, having the same molecular weight and equivalent major mass spectral fragments, are not completely resolved using typical GC-mass spectrometry screening methods for illicit drugs. MDMA coelutes with at least one nondrug regioisomer under standard drug screening conditions. Separation of the 10 regioisomers is studied using stationary phases of varying polarities. Resolution optimization shows that very slow program rates give the best separation for the nonpolar stationary phases, requiring analysis times of as much as 85 min. Narrow-bore columns containing the same nonpolar stationary phases improve the analysis time to approximately 29 min. The polar stationary phase DB-35MS allows high-temperature programming rates, yielding complete resolution of all 10 compounds in less than 7 min. Temperature program optimization studies on the DB-35MS phase allow the separation time to be reduced to approximately 4.5 min.     

Targeting cell surface receptors with ligand-conjugated nanocrystals

To explore the potential for use of ligand-conjugated nanocrystals to target cell surface receptors, ion channels, and transporters, we explored the ability of serotonin-labeled CdSe nanocrystals (SNACs) to interact with antidepressant-sensitive, human and Drosophila serotonin transporters (hSERT, dSERT) expressed in HeLa and HEK-293 cells. Unlike unconjugated nanocrystals, SNACs were found to dose-dependently inhibit transport of radiolabeled serotonin by hSERT and dSERT, with an estimated half-maximal activity (EC(50)) of 33 (dSERT) and 99 microM (hSERT). When serotonin was conjugated to the nanocrystal through a linker arm (LSNACs), the EC(50) for hSERT was determined to be 115 microM. Electrophysiology measurements indicated that LSNACs did not elicit currents from the serotonin-3 (5HT(3)) receptor but did produce currents when exposed to the transporter, which are similar to those elicited by antagonists. Moreover, fluorescent LSNACs were found to label SERT-transfected cells but did not label either nontransfected cells or transfected cells coincubated with the high-affinity SERT antagonist paroxetine. These findings support further consideration of ligand-conjugated nanocrystals as versatile probes of membrane proteins in living cells.     

Adsorption isotherms of a molecular imprinted polymer prepared in the presence of a polymerisable template: Indirect evidence of the formation of template clusters in the binding site

The current opinion about molecular imprinted polymers (MIPs) is that their molecular recognition properties are due to the presence of nanocavities formed during a polymerization process developed in the presence of a template molecule. According to this principle, the shape of these nanocavities is complementary to that of the template and non-covalent interactions are established between the binding site and a single template molecule. Nevertheless, there are some experimental indications that the real molecular recognition mechanism involves clusters of template molecules being packed into the binding site. Recently, it has been proposed that template molecules covalently linked to the binding site can act as nucleation points, enhancing the formation of these molecular clusters.We have tested this hypothesis by studying the adsorption isotherms of polymers prepared by imprinting them with 2,4,5-trichlorophenoxyacetic acid (2,4,5-T). Three different polymers were considered: P0, prepared without the template, P1, whose template was represented by 2,4,5-T molecules, and P2, whose template was 1/3 constituted by the polymerisable 2-(2,4,5-trichlorophenoxyacetoxy)-ethylmethacrylate (2,4,5-TEMA) and 2/3 by 2,4,5-T. The polymers were prepared by thermoinduced polymerization of template mixtures, 4-vinylpyridine and ethylene dimethacrylate. The crushed polymers were packed into HPLC columns and frontal chromatographic runs were performed by eluting the columns with a mobile phase containing variable amounts of 2,4,5-T.The experimental adsorption isotherms were fitted by using several isotherm models, and the Freundlich-Langmuir model was found to give the best fitting in terms of F-test. All the models considered showed a significant difference between the affinity constant values measured for the polymer P1 and P2, with a higher value for the polymer P2 (for Freundlich-Langmuir model: polymer P1, k=(2.00±0.43)×10⁴ M⁻¹; polymer P2, k=(1.93±0.0535)×10⁵ M⁻¹; ratio P2/P1, 9.65±2.09). Such experimental results support the hypothesis that a polymer prepared with a limited amount of template covalently attached to the binding site shows an increased affinity for the template itself.     

A synthetic divalent cholera toxin glycocalix[4]arene ligand having higher affinity than natural GM1 oligosaccharide

A high-affinity ligand of cholera toxin, the divalent glycocalix[4]arene 1, was obtained by exploiting a combination of structure-based design of glycomimetic monovalent ligands and affinity enhancements by multivalent presentation through a calix[4]arene scaffold. It exhibits a slightly higher affinity for the toxin than its natural ligand, the GM1 oligosaccharide.     

Two-state irreversible thermal denaturation of anionic peanut (Arachis hypogaea L.) peroxidase

Detailed differential scanning calorimetry (DSC), steady-state tryptophan fluorescence and far-UV circular dichroism (CD) studies, together with enzymatic assays, were carried out to monitor the thermal stability of anionic peanut peroxidase (aPrx) at pH 3.0. The spectral parameters were seen to be good complements to the highly sensitive but integral method of DSC. Thus, changes in far-UV CD corresponded to changes in the overall secondary structure of the enzyme, while changes in intrinsic tryptophan fluorescence emission corresponded to changes in the tertiary structure of the enzyme. The results, supported with data concerning changes in enzymatic activity with temperature, show that thermally induced transitions for aPrx are irreversible and strongly dependent upon the scan rate, suggesting that denaturation is under kinetic control. It is shown that the process of aPrx denaturation can be interpreted with sufficient accuracy in terms of the simple kinetic scheme, , where k is a first-order kinetic constant that changes with temperature, as given by the Arrhenius equation; N is the native state, and D is the denatured state. On the basis of this model, the parameters of the Arrhenius equation were calculated.     

Condensed rare-earth metal-rich tellurides. Extension of layered Sc6PdTe2-type compounds to yttrium and lutetium analogues and to Y7Te2, the limiting binary member

Six isotypic R₆ZTe₂ phases have been synthesized in Ta at elevated temperatures and characterized by single crystal X-ray refinements for R=Y, Z=Rh, Pd, Ag, Y and for R=Lu, Z=Cu, Ag. All crystallize in the Sc₆PdTe₂-type structure, Pnma, Z=4, a∼21.5 Å, b∼4.1 Å, c∼11.4 Å. The results can be viewed as the replacement of Te3 atoms in the parent isotypic Sc₂Te (or in the hypothetical Y₂Te or Lu₂Te analogues) by the above the Z, the Y example giving the new binary phase Y₇Te₂. The shorter (and stronger) metal-metal bonds concentrate in the region of metal (Z, Y) substitution, as revealed by larger integrated crystal orbital Hamilton population (ICOHP) values derived from linear muffin-tin-orbital (LMTO) calculations. Partial densities-of-states data for Y₇Te₂ reflect a similar behavior. Individual R-R bond distances are seen to deviate appreciably from the more fundamental overlap population measures for each.     

Dip-pen nanolithography in tapping mode

Dip-pen nanolithography (DPN) is becoming a popular nano-patterning technique for depositing materials onto a substrate using the probe of an atomic force microscope (AFM). Here, we demonstrate the deposition of a short synthetic peptide by DPN using the Tapping Mode of AFM rather than the commonly used contact mode. DPN in Tapping Mode requires drive amplitude modifications for deposition, yet allows for gentle imaging of the deposited material and enables deposition on soft surfaces.     

The reaction of N-aminophthalimide with isothiocyanates

N-Aminophthalimide ( I ) reacted in refluxing isopropyl alcohol with a number of isothiocyanates to give the related 1:1 addition products, N-(3-substitutedthioureido)phthalimides III. On the other hand, heating I directly with an excess of neat arylisothiocyanates produced the N-arylphthalimides IV. As shown for IIIa, the 1:1 addition products are conveniently deblocked by the Ing-Manske procedure to yield the 4-substituted thiosemicarbazide.