The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.     

水分子对α相CL-20热分解机理影响的分子动力学研究

研究六硝基六氮杂异伍兹烷(CL-20)晶体不同晶型在不同温度下的反应机理, 对于深入认识含能材料在极端条件下的冲击起爆、冲击点火和爆轰过程等具有重要意义. 基于反应力场, 研究水分子在纯α相CL-20及其水合物的晶体结构中数量随时间的变换, 分析水分子对两种体系的初始分解和第二阶段的分解路径的影响. 计算结果表明: CL-20 分子的初始分解路径与水分子无关, 第二阶段的分解反应与水分子有关. 在低温(T<1500 K)下, 水分子对两种体系没有影响, 二者的初始分解路径均为N-NO₂键生成NO₂自由基; 在1500 K≤T≤2500 K时, 水分子作为反应物或与NO₂、、OH自由基等组成催化体系, 生成O₂、H₂O₂等产物, 加速水合物体系在高温下的第二阶段反应, 使得高温下水合物体系的化学反应速率和反应生成的NO₂自由基的数量比纯CL-20体系的化学反应速率和反应生成的NO₂自由基的数量大; 在T>2500 K时, 水分子的催化反应抑制CL-20初始分解反应, 使得在3000 K时纯CL-20体系的反应速率大于水合物体系中CL-20的反应速率.     

Synthesis of 1,4-diarylsubstituted 1,3-diynes through ligand-free copper-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids

An efficient method of ligand-free Cu-catalyzed oxidative decarboxylative homocoupling of aryl propiolic acids was developed. When CuI was employed as the catalyst and I₂ as the oxidant, the decarboxylative homocoupling reaction for C_sp–C_sp bond formation in DMSO underwent smoothly to afford the corresponding 1,4-disubstituted 1,3-dialkynes in good to excellent yields without any organic ligands. This catalytic system was applicable to aryl propiolic acids bearing different steric, electronic, and functional groups.     

A novel approach to synthesize dichlorobenzonitriles by selective ammoxidation

Research on Chemical Intermediates - Dichlorobenzonitriles are important organic intermediates for the production of many fine chemicals and are produced most economically and environment-friendly...     

Arene Ruthenium(II) Complexes Bearing the κ-P or κ-P,κ-S Ph2P(CH2)3SPh Ligand

Neutral [Ru(η⁶-arene)Cl₂{Ph₂P(CH₂)₃SPh-κP}] (arene = benzene, indane, 1,2,3,4-tetrahydronaphthalene: 2a, 2c and 2d) and cationic [Ru(η⁶-arene)Cl(Ph₂P(CH₂)₃SPh-κP,κS)]X complexes (arene = mesitylene, 1,4-dihydronaphthalene; X = Cl: 3b, 3e; arene = benzene, mesitylene, indane, 1,2,3,4-tetrahydronaphthalene, and 1,4-dihydronaphthalene; X = PF₆: 4a–4e) complexes were prepared and characterized by elemental analysis, IR, ¹H, ¹³C and ³¹P NMR spectroscopy and also by single-crystal X-ray diffraction analyses. The stability of the complexes has been investigated in DMSO. Complexes have been assessed for their cytotoxic activity against 518A2, 8505C, A253, MCF-7 and SW480 cell lines. Generally, complexes exhibited activity in the lower micromolar range; moreover, they are found to be more active than cisplatin. For the most active ruthenium(II) complex, 4b, bearing mesitylene as ligand, the mechanism of action against 8505C cisplatin resistant cell line was determined. Complex 4b induced apoptosis accompanied by caspase activation.     

Anomalous lattice response at the Mott transition in a quasi-2D organic conductor

Discontinuous changes of the lattice parameters at the Mott metal-insulator transition are detected by high-resolution dilatometry on deuterated crystals of the layered organic conductor kappa-(BEDT-TTF)(2)Cu[N(CN)(2)]Br. The uniaxial expansivities uncover a striking and unexpected anisotropy, notably a zero effect along the in-plane c axis along which the electronic interactions are relatively strong. A huge thermal expansion anomaly is observed near the end point of the first-order transition line enabling us to explore the critical behavior with very high sensitivity. The analysis yields critical fluctuations with an exponent alpha approximately 0.8+/-0.15 at odds with the novel criticality recently proposed for these materials [Kagawa et al., Nature (London) 436, 534 (2005)]. Our data suggest an intricate role of the lattice degrees of freedom in the Mott transition for the present materials.     

尖晶石铁氧体TixNi1-xFe2O4中阳离子分布和Ti离子磁矩的实验研究

采用固相反应法制备了系列样品Ti_xNi_1-xFe₂O₄ (x=0.0, 0.1, 0.2, 0.3, 0.4). 室温下的X射线衍射谱表明样品全部为(A)[B]₂O₄型单相立方尖晶石结构, 属于空间群Fd3m. 样品的晶格常数随Ti掺杂量的增加而增大. 样品在10 K温度下的比饱和磁化强度σ_S随着Ti掺杂量x的增加逐渐减小. 研究发现, 当Ti掺杂量x≥ 0.2时, 磁化强度σ随温度T的变化曲线出现两个转变温度T_L和T_N. 当温度低于T_N时, 磁化强度明显减小; 当温度达到T_N时, dσ/dT具有最大值. σ-T曲线的这些特征表明, 由于Ti掺杂在样品中出现了附加的反铁磁结构. 这说明样品中的Ti离子不是无磁性的+4价离子, 而是以+2和+3价态存在, 其离子磁矩的方向与Fe和Ni离子的磁矩方向相反. 利用本课题组提出的量子力学方势垒模型拟合样品在10 K温度下的磁矩, 得到了Ti, Fe和Ni三种阳离子在(A)位和[B]位的分布情况, 并发现在所有掺杂样品中, 80%的Ti离子以+2价态占据尖晶石结构的[B]位.     

Wastes from Wood Extraction Used in Composite Materials: Behavior after Accelerated Weathering

New materials were obtained by incorporating in polypropylene (PP) matrix 60% wood wastes resulting after extraction with supercritical carbon dioxide, water, and ethanol. Structural, mechanical, thermal, and rheological characterizations, as well as moisture uptake of the composites, were evaluated before and after accelerated weathering. It was found that the extraction method influenced the composite properties due to the hydrophilic-hydrophobic balance. The addition of extracted fibers results in an increase in hardness and tensile properties and a decrease of impact strength as compared to PP.