Ti接枝MCM-41催化剂的结构设计及化学亲和选择性研究

 用二氯化钛茂作为活性物种的来源，利用Si－MCM－41催化剂表面羟基的反应性，得到了Ti接枝MCM－41催化剂的两种结构模型．结构表征结果表明，Ti接枝MCM－41催化剂不仅长程结构好，孔径分布均一，而且催化剂表面活性中心含量高．两种结构模型催化剂上芳烃羟化反应性能表明，Ti接枝MCM－41催化剂表面的亲水／憎水性可以在较宽的范围内调变，从而可实现控制芳烃羟化的化学亲和选择性．另外，研究结果还表明，Ti接枝MCM－41催化剂具有很好的活性稳定性．     

塑料成型工艺实习CAI课件的开发

针对当前学生实习面临的困难，以Authorware为开发工具，编制了塑料成型工艺实习CAI课件，整个软件图文并茂，图像，动画，解说，音乐相结合，形象地介绍了塑料各种成型工艺的主要原理，生产设备，工艺流程和相关产品，应用本软件学生可以进行模拟实习，该软件激发了学生学习的兴趣，提高了实习质量。     

瓜环与哌嗪衍生物主客体配合物的研究(英)

本文采用核磁共振技术研究瓜环与哌嗪衍生物主客体配合物的结构特征。¹H核磁共振谱证实八元瓜环能与一些哌嗪衍生物形成稳定的双客体主客体配合物,六元瓜环与一些哌嗪衍生物形成稳定的1∶1主客体配合物。而五、七元瓜环和哌嗪衍生物则未表现出明显地相互作用。形成的自组装主客体配合物得到质谱的进一步证实。     

Interfacial micellar structures from novel amphiphilic star polymers

An amphiphilic heteroarm star polymer containing 12 alternating hydrophobic/hydrophilic arms of polystyrene (PS) and poly(acrylic acid) (PAA) connected to a well-defined rigid aromatic core was studied at the air-water and the air-solid interfaces. At the air-water interface, the molecules spontaneously form pancakelike micellar aggregates which measure up to several microns in diameter and 5 nm in thickness. Upon reduction of the surface area per molecule to 7 nm2, the two-dimensional micelles merged into a dense monolayer. We suggest that confined phase separation of dissimilar polymer arms occurred upon their segregation on the opposite sides of the rigid disklike aromatic core, forcing the rigid cores to adopt a face-on orientation with respect to the interface. Upon transfer onto solid supports the PS chains face the air-film interface making it completely hydrophobic, and the PAA chains were found to collapse and form a thin flattened underlayer. This study points toward new strategies to create large 2D microstructures with facial amphiphilicity and suggests a profound influence of star molecular architecture on the self-assembly of amphiphiles at the air-water interface.     

用X-射线衍射法测定聚对苯二甲酸乙二醇酯/聚对苯二甲酸丁二醇酯共混体系的结晶度

Based on Hermans and Weidinger postulate that the crystalline fraction is proportional to crystalline intensity Ic and that the amorphous fraction is proportional to amorphous intensity Ia, it is. Suggseteet that for PBT/PET blends we assume that the intensity at 18. 2° is completely originated from amorphous scattering. The separation between the peaks at 17. 2° and 20. 8° is 3. 6°m, which is regarded as large enough to justify this assumption. Thus , it is possible to draw an acceptable demaraction line between the crystalline and amorphous scattering. The degree of crystallinity Xc is given by X_c-I_c/(I_c+KI_a),coefficient K is available by the values of Ic plotted against the values of Ia.For PBT/PET blends,we obtain that K is 0.95 and that correlation coefficient is 0.92 According to the method revieved above,we investi-gated the crystallinity of PBT/PET blends prepared by different ways.     

苯乙烯在蚕丝丝胶上接枝共聚的研究

<正> 蚕丝丝胶(Silk Sercin简写SS)是由十八种氨基酸缩合而成的天然旦白,占蚕茧重量的20—30％,由于它溶于水,在缫丝过程中随废水而流失。我们曾对丝胶-金属络合物的制备及其对DL和L-3,4二羟基苯丙氨酸氧化催化活性进行了研究。本文研究了苯乙烯(St)在丝胶上接枝共聚的机理及规律,用红外光谱、差示扫描量热法、热重     

1-苯基-3-甲基-4-(6-氢-4-甲基氨基-5-硫杂-2,3-吡嗪)-吡唑啉酮的合成与晶体结构

通过1-苯基-3-甲基-4-氯乙酰基-吡唑啉酮-5 (PMCP) 和4-甲基氨基硫脲 (MTSC) 缩合, 形成了一种新的双杂环化合物 (PMCP-MTSC)。利用元素分析与单晶X-射线衍射进行了表征。 该化合物(C14H15N5OS)属单斜晶系, P21 空间群, 晶体学参数为 a = 7.634(1), b = 11.639(2), c = 8.150(2) ? ?= 98.13(1), V = 716.9(2) ?, Z = 2, Dc = 1.396 g/cm3, (MoKa) = 0.232 mm-1, F(000) = 316, Mr = 301.37。结构由直接法解出,共收集3114个衍射点,其中I > 2(I)的独立衍射点有2453个,用全矩阵最小二乘法修正,最终偏离因子:R = 0.0294, wR = 0.0738。结构分析表明: 该化合物以酮式存在,分子间通过氢键作用(N(5)H…O)连接起来并形成一维链状结构。     

密胺-脲甲醛树脂合成工艺放大研究

以密胺－脲甲醛树脂合成的小试工艺条件为依据，完成了放大试验过程的工艺研究。研究结果与小试研究的工艺条件相吻合。     

五氯化磷辅助下氨基酸的自组装成肽反应研究

L-α-氨基酸和D-α-氨基酸可与五氯化磷直接发生磷酰化反应，随后自组装成多肽，但β-氨基酸不能成肽，DL-α-氨基酸成肽困难；在SOCl2存在下，α-氨基酸也不能成肽，用电喷雾质谱研究了氨基酸的自组装反应，反应过程中有五元环状的氨基酸五配位磷中间体生成，使用硅烷基保护的氨基酸，在^31PNMR中可观察到五配位磷中间体。