Effects of Processing Parameters on Microstructure and Properties of Nanoscale ZrC/ZrB2 Multilayered Coatings

ZrC/ZrB2 multilayered coatings with bilayer periods of 3.5-40nm are synthesized by rf magnetron sputtering. Analyses of x-ray diffraction, scanning electron microscopy and nanoindentation indicate that multilayered coatings possess much higher hardness and greater fracture resistance than monolithic ZrC and ZrB2 coatings. A maximum hardness （41.TCPa） and a critical fracture load （73.7mN） are observed in the multilayer with A = 32 nm deposited at the substrate bias -40 V. Higher residual stress built in the ZrC layer can be released by periodic insertion of ZrB2 into the ZrC layer. A clear multilayered structure with mixed ZrB2（001）, ZrB2 （002） and ZrC （111） orientations should be responsible for the enhanced mechanical properties.     

孤子掺杂光纤放大的半径典模型与分析

建立了孤子掺杂光纤放大的半经典模型，给出了分布放大透明传输的泵浦条件，详细讨论了激发态吸收的影响．文中结果为Ｅｒ￣３＋掺杂光纤孤子放大器的设计提供了重要理论依据．     

通过J/Ψ→N(N-)M衰变研究N*时的核子极点效应

研究了J／Ψ→pp^-π衰变过程中核子极点图的贡献，特别是由离壳效应带来的贡献．发现衰变宽度对形状因子是敏感的．在通过用J／Ψ→pp^-π衰变研究N^*时，核子极点图作为背景道的贡献是非常重要的；在通过J／Ψ→pp^-η和pp^-η研究N^*时，核子极点图的贡献可忽略不计；在通过J／Ψ→pp^-ω研究N^*时，核子极点图有明显的贡献．     

C_nP_4~4(n=1～7)团簇结构与能量的密度泛函研究

使用分子图形软件设计出多种CnP-4(n =1～ 7)的结构模型 ,并进行B3LYP密度泛函几何构型优化和振动频率计算 .最稳定的CP-4和C2 P-3 都是平面环状结构 .最稳定的CnP-4(n =3 ,5 ,7)结构在直碳链的一端连接 1个磷原子且另一端是P3 C的四元环的平面结构 .最稳定的CnP-4(n =4,6)结构在直碳链的一端连接 1个磷原子且另一端是P3 的三元环的锄状结构 .直碳链可与平面环的磷原子生成大π键 .大多数构型是由C2 ,C3 ,C4子结构以环状或链状方式组成的 .碳原子与磷原子以交替方式排列的结构数量少、能量高 .     

Radiative lifetimes of Rydberg states of BeⅠ and BeⅢ

By using the multichannel quantum defect theory(MQDT),we have evaluated the energy levels and lifetimes of 2sns ^3 S1,2snd ^3D(n=3-25)of BeI and 1 sns ^3s1,1snd ^3D(n=3-25)of BeⅢ,These energies and lifetimes that we have calculated not only agree with the recent measurements and theoretical calculation of Ref.4 and Ref.3, but also predict the lifetimes of 66 other highly excited states.     

The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid–liquid phase separation

In this article a new technique was developed to fabricate scaffolds with a unique microstructure by solid–liquid separation in combination with particulate-leaching. Firstly, the effects of polymer concentration, quenching temperature on the porous morphology and the mechanical property of obtained scaffolds during solid–liquid separation have been investigated. Then, salt granules as porogen were introduced into the solid–liquid phase separation to produce the unique pore structure of the scaffold. The pore diameter of the scaffold could be controlled with the particulate size and the wall of pores possessed special microstructure, which enhanced the pore interconnectivity. The cell culture results confirmed that a good interconnectivity of the scaffold prepared by the improved solid–liquid separation was useful for nutrition transportation and cell proliferation. Copyright © 2003 John Wiley & Sons, Ltd.     

Stationary Intensity Distribution of Single-Mode Laser Driven by Additive and Multiplicative Colored Noises with Colored Cross-Correlation

Applying the approximate Fokker-Planck equation we derived, we obtain the analytic expression of thestationary laser intensity distribution Pst(Ⅰ) by studying the single-mode laser cubic model subject to colored cross-correlation additive and multiplicative noise, each of which is colored. Based on it, we discuss the effects on the stationarylaser intensity distribution Pst(Ⅰ) by cross-correlation between noises and “color“ of noises (non-Markovian effect) whenthe laser system is above the threshold. In detail, we analyze two cases: One is that the three correlation-times (i.e.the self-correlation and cross-correlation times of the additive and multiplicative noise) are chosen to be the same value(τ1 = τ2 = τ3 = τ). For this case, the effect of noise cross-correlation is investigated emphatically, and we detect thatonly when λ≠ 0 can the noise-induced transition occur in the Pst(Ⅰ) curve, and only when τ≠ 0 and λ≠ 0, can the“reentrant noise-induced transition“ occur. The other case is that the three correlation times are not the same value,τ1 ≠τ2 ≠τ3. For this case, we find that the noise-induced transition occurring in the Pst (Ⅰ) curve is entirely differentwhen the values of τ1, τ2, and τ3 are changed respectively. In particular, when τ2 (self-correlation time of additivenoise) is changing, the ratio of the two maximums of the Pst(Ⅰ) curve R exhibits an interesting phenomenon, “reentrantnoise-induced transition“, which demonstrates the effect of noise “color“ (non-Markovian effect).     

电感耦合等离子体发射光谱法同时测定涂料中的Pb、Cd、Cr和Hg

研究了电感耦合等离子体发射光谱法测定涂料中的重金属Pb，Cd，Cr和Hg，确定了测定涂料中的重金属Pb，Cd，Cr和Hg的最佳条件。加标回收试验和实际样品测定结果表明，方法的回收率和精密度分别在99.5％-110．0％和0．95％-1．98％范围，该方法快速、准确、可靠，各元素的检出限能满足涂料安全标准，适用于涂料的日常检验。     

MES动态修饰PDMS芯片毛细管电泳电化学检测多巴胺和肾上腺素

在2-(N-吗啉)乙磺酸(MES)动态修饰的聚二甲基硅氧烷(PDMS)微通道中,采用在柱安培检测方式,分离并测定了神经递质多巴胺和肾上腺素.实验中对分离电压、检测电位以及添加剂浓度等参数进行了探讨和优化.结果表明,修饰后的通道减少了对被测物的吸附,有效提高了分离度,多巴胺和肾上腺素的检测限分别为2.0 μmol/L和3.7 μmol/L.     

一类广义长短波方程的整体适定性

In the present paper,we investigate the well-posedness of the global solution for the Cauchy problem of generalized long-short wave equations.Applying Kato's method for abstract quasi-linear evolution equations and a priori estimates of solution,we get the existence of globally smooth solution.