Access to Nitriles from Aldehydes Mediated by an Oxoammonium Salt

A scalable, high yielding, rapid route to access an array of nitriles from aldehydes mediated by an oxoammonium salt (4‐acetylamino‐2,2,6,6‐tetramethylpiperidine‐1‐oxoammonium tetrafluoroborate) and hexamethyldisilazane (HMDS) as an ammonia surrogate has been developed. The reaction likely involves two distinct chemical transformations: reversible silyl‐imine formation between HMDS and an aldehyde, followed by oxidation mediated by the oxoammonium salt and desilylation to furnish a nitrile. The spent oxidant can be easily recovered and used to regenerate the oxoammonium salt oxidant.     

Incorporating high-pressure electroosmotic pump and a nano-flow gradient generator into a miniaturized liquid chromatographic system for peptide analysis

We integrate a high-pressure electroosmotic pump (EOP), a nanoflow gradient generator, and a capillary column into a miniaturized liquid chromatographic system that can be directly coupled with a mass spectrometer for proteomic analysis. We have recently developed a low-cost high-pressure EOP capable of generating pressure of tens of thousands psi, ideal for uses in miniaturized HPLC. The pump worked smoothly when it was used for isocratic elutions. When it was used for gradient elutions, generating reproducible gradient profiles was challenging; because the pump rate fluctuated when the pump was used to pump high-content organic solvents. This presents an issue for separating proteins/peptides since high-content organic solvents are often utilized. In this work, we solve this problem by incorporating our high-pressure EOP with a nano-flow gradient generator so that the EOP needs only to pump an aqueous solution. With this combination, we develop a capillary-based nano-HPLC system capable of performing nano-flow gradient elution; the pump rate is stable, and the gradient profiles are reproducible and can be conveniently tuned. To demonstrate its utility, we couple it with either a UV absorbance detector or a mass spectrometer for peptide separations.     

Giant phospholipid/block copolymer hybrid vesicles: mixing behavior and domain formation

Lipids and block copolymers can be individually assembled into unsupported, spherical membranes (liposomes or polymersomes), each having their own particular benefits and limitations. Here we demonstrate the preparation of microscale, hybrid "lipopolymersomes" composed of the common lipid POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine) and the commercially available copolymer PBd-b-PEO (polybutadiene-b-poly(ethylene oxide)) with the goal of incorporating the advantageous qualities of the unitary systems into mixed-membrane capsules. We investigate the lipopolymersomes using confocal fluorescence microscopy and demonstrate that these hybrid membranes are well mixed on nanoscopic length scales within the permittable compositional windows for hybrid vesicle formation. We measure the intramembrane dynamics and mechanical properties of these hybrid membranes by fluorescence recovery after photobleaching (FRAP) and micropipet aspiration, respectively. For the first time, we demonstrate the demixing of lipid-rich and polymer-rich membrane domains within the same vesicle membrane. This is achieved by the biotinylation of one of the constituent species and cross linking with the protein NeutrAvidin. The resultant domain patterning is dependent upon which component carries the biotin functionality: cross linking of the copolymer species results in domains that ripen into a single, large, copolymer-rich island, and cross linking of the lipids yields many small, "spot-like", lipid-rich domains within a copolymer-rich matrix. We discuss these morphological differences in terms of the fluidity and mechanical properties of the membrane phases and the possible resultant interdomain interactions within the membrane. These heterogeneous hybrid lipopolymersomes could find applications in fields such as targeted delivery, controlled release, and environmental detection assays where these capsules possess the characteristics of biocompatible lipid membranes combined with enhanced mechanical strength and stability from the copolymer matrix.     

Noncontact method for calibration of lateral forces in scanning force microscopy

This paper describes a noncontact calibration procedure for lateral force microscopy in air and liquids. The procedure is based on the observation that the sensitivity of a force microscope may be calibrated using the raw thermal noise spectrum of the cantilever and its known spring constant, which can be found from the same uncalibrated thermal noise spectrum using Sader's method (Rev. Sci. Instrum.1999, 70, 3967-3969). In addition to the power spectrum of the cantilever thermal noise, this noncontact calibration method only requires knowledge of the plan view dimensions of the cantilever that could be measured using an optical microscope. This method is suitable for in situ force calibration even in viscous fluids through a two-step calibration procedure, where the cantilever thermal spectra are captured both in air and in the desired liquid. The lateral calibration performed with the thermal noise technique agrees well with sensitivity values obtained by the wedge calibration procedure. The approach examined in this paper allows for complete calibration of normal and lateral forces without contacting the surface, eliminating the possibility for any tip damage or contamination during calibration.     

Surface-confined nickel mediated cross-coupling reactions: characterization of initiator environment in Kumada catalyst-transfer polycondensation

Kumada catalyst-transfer polycondensation (KCTP) has proven to be an excellent strategy toward the synthesis of well-defined conjugated polymers. In this report, Ni(0) species are reacted with surface-bound aryl bromides to yield KCTP initiators of structure (aryl)Ni(II)-Br. Surface-confined Kumada reactions are carried out with a ferrocene functionalized Grignard reagent to quantify initiator coverage, ligand exchange, and Kumada reaction kinetics. In addition, surface-initiated Kumada catalyst-transfer polycondensation (SI-KCTP) is carried out from the fabricated initiators to modify SiO(2) and ITO surfaces. Uniform poly(3-methylthiophene) films with thicknesses between 40 and 65 nm were characterized using a variety of spectroscopic and electrochemical techniques.     

Selective pressurized liquid extraction of estrogenic compounds in soil and analysis by gas chromatography-mass spectrometry

A selective pressurized liquid extraction (SPLE) method, followed by gas chromatography–mass spectrometry (GC–MS), for the simultaneous extraction and clean-up of estrone (E1), 17β-estradiol (E2), 17α-ethynylestradiol (EE2), estriol (E3) and bisphenol A (BPA) from soil samples is described. The on-line clean-up of soil by SPLE was achieved using different organic matter retainers, including silica, alumina and Florisil, the most effective being silica. Thus, different amounts of silica, in conjunction with different extraction solvents (acetone, ethyl acetate, isohexane and dichloromethane), either alone or in combination, were used to extract the target chemicals from spiked soil samples. It was shown that 3 g silica resulted in satisfactory rates of recovery of target compounds and acetone:dichloromethane (1:3, v/v) was efficient in extracting and eluting estrogenic compounds for SPLE. Variables affecting the SPLE efficiency, including temperature and pressure were studied; the optimum parameters were 60 °C and 1500 psi, respectively. The limits of detection (LODs) of the proposed method were 0.02–0.37 ng g⁻¹ for the different estrogenic chemicals studied. The outputs using the proposed method were linear over the range from 0.1 to 120 ng g⁻¹ for E1, E2, EE2, 0.2–120 ng g⁻¹ for E3, and 0.5–120 ng g⁻¹ for BPA. The optimized method was further verified by performing spiking experiments in natural soil matrices; good rates of recovery and reproducibility were achieved for all selected compounds and the method was successfully applied to soil samples from Northeast Scotland, for the determination of the target compounds.     

Total synthesis of (-)-N-methylwelwitindolinone C isothiocyanate

We report the first total synthesis of (-)-N-methylwelwitindolinone C isothiocyanate. Our route features a number of key transformations, including an indolyne cyclization to assemble the [4.3.1]-bicyclic scaffold, as well as a late-stage intramolecular nitrene insertion to functionalize the C11 bridgehead carbon en route to the natural product.     

Bubbles navigating through networks of microchannels

This paper describes the behavior of bubbles suspended in a carrier liquid and moving within microfluidic networks of different connectivities. A single-phase continuum fluid, when flowing in a network of channels, partitions itself among all possible paths connecting the inlet and outlet. The flow rates along different paths are determined by the interaction between the fluid and the global structure of the network. That is, the distribution of flows depends on the fluidic resistances of all channels of the network. The movement of bubbles of gas, or droplets of liquid, suspended in a liquid can be quite different from the movement of a single-phase liquid, especially when they have sizes slightly larger than the channels, so that the bubbles (or droplets) contribute to the fluidic resistance of a channel when they are transiting it. This paper examines bubbles in this size range; in the size range examined, the bubbles are discrete and do not divide at junctions. As a consequence, a single bubble traverses only one of the possible paths through the network, and makes a sequence of binary choices ("left" or "right") at each branching intersection it encounters. We designed networks so that, at each junction, a bubble enters the channel into which the volumetric flow rate of the carrier liquid is highest. When there is only a single bubble inside a network at a time, the path taken by the bubble is, counter-intuitively, not necessarily the shortest or the fastest connecting the inlet and outlet. When a small number of bubbles move simultaneously through a network, they interact with one another by modifying fluidic resistances and flows in a time dependent manner; such groups of bubbles show very complex behaviors. When a large number of bubbles (sufficiently large that the volume of the bubbles occupies a significant fraction of the volume of the network) flow simultaneously through a network, however, the collective behavior of bubbles-the fluxes of bubbles through different paths of the network-can resemble the distribution of flows of a single-phase fluid.     

Reactions of coordinated hydroxymethylphosphines with NH-functional amines: the phosphorus lone pair is crucial for the phosphorus Mannich reaction

Non-coordinated hydroxymethylphosphines react readily with primary and secondary amines by the phosphorus Mannich reaction. To determine if this reactivity can be used to synthesize phosphine macrocycles, trans-Fe(DHMPE)(2)Cl(2) (DHMPE = 1,2-bis(dihydroxymethylphosphino)ethane) was prepared and reacted with various amines. However, no phosphorus Mannich reactivity was observed. In order to understand why no reactions occurred, the Mannich reactivity of the borane-coordinated hydroxymethylphosphines DHMPE·2BH(3) and Ph(2)PCH(2)OH·BH(3) was investigated. These borane-coordinated phosphines also did not undergo the phosphorus Mannich reaction. These results suggest that the lone pair of electrons on the phosphorus atom is essential for the phosphorus Mannich reaction to occur, and therefore it is not possible to use this reaction in a templated synthesis of phosphine macrocycles. It is speculated that the mechanism of the phosphorus Mannich reaction may involve a methylenephosphonium intermediate, analogous to an iminium in the standard Mannich reaction. X-ray crystal structures of trans-Fe(DHMPE)(2)Cl(2) and DHMPE·2BH(3) are also presented. Both crystal structures display an extended hydrogen-bonding network in the solid state.     

Minimum permanents on two faces of the polytope of doubly stochastic matrices

We consider the minimum permanents and minimising matrices on the faces of the polytope of doubly stochastic matrices whose nonzero entries coincide with those of, respectively,