Discovery of temperature-dependent phenomena of muon-catalyzed fusion in solid deuterium and tritium mixtures

A systematic experimental study on muon-catalyzed fusion was conducted using a series of solid deuterium and tritium mixtures. A variety of conditions were investigated, i.e., tritium concentrations from 20% to 70%, and temperatures from 5 to 16 K. With decreasing temperature, we observed an unexpected decrease in the muon cycling rate (lambda(c)) and an increase in the muon loss probability (W). The origins of these observed changes were interpreted by the temperature-dependence in the dt mu formation process for lambda(c) and that in the muon reactivation process after muon-to-alpha sticking for W.     

The First Observation of the Temperature-Dependent Phenomenon of Muon Catalyzed Fusion in Solid D–T Mixtures

A systematic study on muon catalyzed fusion (μCF) was conducted in solid deuterium and tritium (D–T) mixture. A variety of experimental conditions were investigated, i.e., tritium concentrations from 20 to 70%, temperatures from 5 to 16 K. A preliminary analysis result suggests a steep decrease in the dtμ-molecule formation rate with decreasing temperature, and also an increase in the probability for a muon reactivation after an α-sticking phenomenon. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of wall heat loss on the emission characteristics of premixed ammonia-air swirling flames interacting with the combustor wall

The influence of wall heat loss on the emission characteristics of ammonia-air swirling flames has been investigated employing Planar Laser-Induced Fluorescence imaging of OH radicals and Fourier Transform Infrared spectrometry of the exhaust gases in combustors with insulated and uninsulated walls over a range of equivalence ratios, ?, and pressures up to 0.5 MPa. Strong influence of wall heat loss on the flames led to quenching of the flame front near the combustor wall at 0.1 MPa, resulting in large unburned NH₃ emissions, and inhibited the stabilization of flames in the outer recirculating zone (ORZ). A decrease in heat loss effects with an increase in pressure promoted extension of the fuel-rich stabilization limit owing to increased recirculation of H₂ from NH₃ decomposition in the ORZ. The influence of wall heat loss resulted in emission trends that contradict already reported trends in literature. NO emissions were found to be substantially low while unburned NH₃ and N₂O emissions were high at fuel-lean conditions during single-stage combustion, with values such as 55 ppmv of NO, 580 ppmv of N₂O and 4457 ppmv of NH₃ at ? = 0.8. In addition, the response of the flame to wall heat loss as pressure increased was more important than the effects of pressure on fuel-NO emission, thereby leading to an increase in NO emission with pressure. It was found that a reduction in wall heat loss or a sufficiently long fluid residence time in the primary combustion zone is necessary for efficient control of NH₃ and N₂O emissions in two-stage rich-lean ammonia combustors, the latter being more effective for N₂O in addition to NO control. This study demonstrates that the influence of wall heat loss should not be ignored in emissions measurements in NH₃-air combustion, and also advances the understanding of previous studies on ammonia micro gas turbines.     

Thermal cured epoxy resins using certain calixarenes and their esterified derivatives as curing agents

The acetyl esterified calixarene (CA) derivatives were prepared from calix[4]resorcinarene (CRA), and p‐tert‐butylcalixarene (BCA[n], n = 4, 6, 8), respectively. Using these CA derivatives as curing agents, the thermal curing reactions of two multifunctional epoxy resins (jER 828, 186 g/equiv., and ESCN, 193.7 g/equiv.) were investigated. The temperatures of glass transition (T_g) and decomposition (T) were measured by DSC and TGA, respectively. Based on the yields, T_gs, and T_ds of the thermal cured jER 828 epoxy resin with CRA‐E100, the curing conditions were optimized to be tetrabutylphosphonium bromide (TBPB) as catalyst in NMP at 160 °C for 15 h. Under this curing condition, the cured materials of jER 828 or ESCN using various CA derivatives as curing agents were prepared. Except for BCA4 derivatives, the yields of thermal curing reaction were higher than 90%. T_gs and Ts of the resultant cured materials were in the range of 113–248 °C and 363–404 °C, respectively. These results mean that the cured epoxy resins with excellent T_gs were successfully formed by using CA derivatives as curing agents. It was also found that the T_gs of cured epoxy resins were strongly affected by the degree of esterification of CA derivatives. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1931–1942, 2010     

Swelling behavior of chemically crosslinked PVA gels in mixed solvents

We report the swelling behavior of chemically crosslinked polyvinyl alcohol (PVA) gels with different degrees of hydrolysis in water, several organic solvents, and their mixed solvents. The gels were dried after gelation and were put into their respective solvents. The gel volume in pure water decreased with increasing temperatures, and the total changes increased with decreasing degrees of hydrolysis. The swelling ratio depends on the solvent and its concentration. In the cases of mixed solvents of methanol–water, ethanol–water, and acetone–water, the gels shrank continuously with increasing concentrations of solvents and reached the collapsed state in the pure organic solvent. In the case of dimethyl sulfoxide (DMSO), on the other hand, the gels shrunk, swelled, and finally reached the swollen state in pure DMSO. Results of measurements using Fourier Transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD) suggested that crosslinks and microcrystallites were formed due to hydrogen bonds during the drying process after gelation. The hydrogen bonds were partly destroyed in a rich solvent, but the residual hydrogen bonds had an essential role in determining the swelling behavior in a poor solvent. The swelling behavior and the possible phase transition of the present system are discussed in terms of the solubility of polymers with different degrees of hydrolysis in given mixed solvents and in terms of the formation and destruction of physical crosslinks in the chemical PVA gels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1978–1986, 2010     

Magneto-optical single dot spectroscopy of GaSb/GaAs type II quantum dots

We have investigated magneto-optical properties of GaSb/GaAs self-assemble type II quantum dots by single dot spectroscopy in magnetic field. We have observed clear Zeeman splitting and diamagnetic shift of GaSb/GaAs quantum dots. The diamagnetic coefficient ranges from 5 to 30 μeV/T². The large coefficient and their large distribution are attributed to the size inhomogeneity and electron localization outside the dot. The g-factor of GaSb/GaAs quantum dots is slightly larger than that of similar type I InGaAs/GaAs quantum dots. In addition, we find almost linear relationship between the diamagnetic coefficient and the g-factor. The linear increase of g-factor with diamagnetic coefficient is due to an increase of spin-orbit interaction with dot size.     

Long-wavelength luminescence from GaSb quantum dots grown on GaAs substrates

Self-assembled GaSb quantum dots (QDs) with a photoluminescence wavelength longer than 1.3 μm were successfully grown by suppressing the replacement of As and Sb on the surface of the GaSb QDs. This result means that GaSb can thus join InAs or GaInAs as a suitable material for QD lasers for optical communications.     

Synthesis and properties of fluorine‐containing polyethers with pendant hydroxyl groups by the polyaddition of bis(epoxide)s with diols

Fluorine‐containing polyethers with pendant hydroxyl groups were synthesized by the polyaddition of fluorine‐containing bis(epoxide)s with certain fluorine‐containing diols with quaternary onium salts as catalysts. When the polyaddition was performed with 2,2′,6,6′‐tetrafluoro‐4,4′‐biphenol diglycidiyl ether and 2,2′,6,6′‐tetrafluoro‐4,4′‐biphenol, the corresponding polyether with pendant hydroxyl groups was successfully obtained in good yield. The polyaddition of certain fluorine‐containing bis(epoxide)s with diols also proceeded in bulk to provide the corresponding fluorine‐containing polyethers with high molecular weights. These polyethers were highly transparent at 157 nm for 0.1 μm thickness, with their transmittance of 14–75% at 157 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2543–2550, 2004     

Synthesis and antitumor activity of new amphiphilic alkylglycerolipids substituted with a polar head group, 2-(2-trimethylammonioethoxy)ethyl or a congeneric oligo(ethyleneoxy)ethyl group

A new series of amphiphilic 1-octadecyl glycerolipids (eleven compounds, 1a-k) were designed and synthesized, in which the 3-phosphocholine portion of platelet-activating factor (1-alkyl-2-acetyl-sn-glycero-3-phosphocholine, PAF) was replaced by the 2-(2-trimethylammonioethoxy)ethyl group and congeneric groups having oligo(ethyleneoxy)ethyl bridges of various lengths at position 3, together with modification at position 2 (lower alkyl, acetonyl, acetoacetyl, carboxymethyl and pyrimidin-2-yl groups). These ether lipids, characterized by a nonphosphorus lysoglycerolipid structure, showed potent antitumor activity in vitro (human promyelocytic leukemia cells, HL-60, and human epidermoid carcinoma cells, KB) and in vivo (mouse sarcoma S180 and mouse mammary carcinoma MM46). Maximal in vitro potency was obtained with 1-O-octadecyl-2-O-(2-pyrimidinyl)-3-O-[2-(2-trimethylammonioethoxy )ethyl] glycerol (1g; IC50 values for both HL-60 and KB were 0.32 microgram/ml, indicating a higher activity than alkyl-lysophospholipid, ET18-OMe). Several appropriately 2-substituted 1-octadecylglycerolipids with the 3-[2-(2-trimethylammonioethoxy)ethyl] group (e.g., methyl, 1b; butyl, 1f; 2,2,2-trifluoroethyl, 1j; and acetonyl, 1k) showed a potent life-span-prolonging effect on mice with ascites sarcoma S180 and on those with mammary carcinoma MM46, when administered intraperitoneally at 16.5 and 12.5 mg/kg/d, respectively. Compounds 1b and 1k showed definite tumor growth inhibition against solid sarcoma S180 in mice, whether given p.o. or i.v. at 16.5 mg/kg/d. Studies on the structure-activity relationships indicate that the metabolic stability to phospholipase C or related enzymes is at least partly responsible for the potent antitumor activity of this series of ether lipids.