In-situ study of the catalytic oxidation of CO on a Pt(1 1 0) surface using ambient pressure X-ray photoelectron spectroscopy

CO and O₂ co-adsorption and the catalytic oxidation of CO on a Pt(1 1 0) surface under various pressures of CO and O₂ (up to 250 mTorr) are studied using ambient pressure X-ray photoelectron spectroscopy (APXPS) and mass spectrometry. There is no surface oxide formation on Pt under our reaction conditions. CO oxidation in this pressure (<500 mTorr), O₂ to CO ratio (<10), and temperature (150 °C) regime is consistent with the Langmuir-Hinshelwood reaction mechanism. Our findings provide in-situ surface chemical composition data of the catalytic oxidation of CO on Pt(1 1 0) at total pressures below 1 Torr.     

Simulation of Fibrillation of PC/LCP/Kevlar Blends and Its Characterizations

Kevlar fiber was fluorinated and oxy-fluorinated directly in presence of undiluted fluorine and fluorine gas mixture and processed with Polycarbonate and LCP at 320 °C under 20 rpm in a twin-screw extruder. The composites were then injection molded into dumbbell shaped specimens under different conditions like various mold temperatures, injection temperatures, injection speeds and mold filling rates. Various physico-chemical characterizations have been performed under definite processing parameter. Orientation of fibers under different injection parameters was evaluated using mold flow simulation technique. Most injection molded or extruded structures however, exhibit non-uniform fiber orientation across the final parts, with a diverging variety of different local fiber orientation states. Distinct skin and core regions were observed in the injection molded parts and it has also been found out that fiber orientation is different in skin and core region for both unmodified and modified derivative, which affects the flow behavior. Processing parameters significantly affect the fiber orientation pattern in the skin and core region for all blended materials. It is worth mentioning that the maximum fiber orientation occurred during the extrusion process at the wall but different extent of fiber orientation is observed during the injection molding depending on the shape of the dumbbell specimen. This fibrillation has been corroborated by the SEM study in both the skin and core region.     

Polyamide-imide/polyetherimide dual-layer hollow fiber membranes for pervaporation dehydration of C1–C4 alcohols

To circumvent the common swelling and deteriorated performance of integral asymmetric hollow fiber membranes for pervaporation dehydration, we have developed novel polyamide-imide (PAI)/polyetherimide (PEI) hollow fiber membranes with synergized performance with the aid of dual-layer spinning technology. Dehydration of C1–C4 alcohols has been conducted and the orders of their fluxes and permeances have been analyzed. The hollow fibers spun at 2 cm air gap and annealed at 75 °C exhibit the highest pervaporation performance: separation factors for t-butanol/water and iso-butanol/water binary systems are greater than 50,000 with flux more than 700 g/m² h. A comparison with literature data shows that the newly developed membranes outperform most other polymeric membranes for the dehydration of IPA and butanols. The dual-layer hollow fiber membranes also exhibit good long-term stability up to 200 h. The superior performance can be attributed to (1) the balanced properties of PAI as the selective layer for dehydration pervaporation; (2) the low water uptake and less swelling characteristic of the PEI supporting layer; and (3) the desirable membrane morphology consisting of a fully porous inner layer, a porous interface, and an ultrathin dense-selective outer skin.     

Double sample preconcentration by in‐line coupled large volume single drop microextraction and sweeping in capillary electrophoresis

Single drop microextraction (SDME) is a convenient and powerful preconcentration method for CE before injection. By simple combination of sample‐handling sequences without modification of the CE apparatus, a drop of an aqueous acceptor phase covered with a thin organic layer was formed at the tip of a capillary; 10 min SDME of fluorescein and 6‐carboxyfluorescein from a donor phase of pH 1 to an acceptor phase of pH 9 provided 110‐fold enrichments without stirring the donor phase. To improve the concentration effect further, SDME was coupled with an on‐line (after injection) sample preconcentration method, sweeping, in which analytes in a long sample zone are accumulated at the boundary of a pseudostationary phase penetrating into the sample zone. It is thus necessary to inject a sample of much larger volume than that of a drop in typical SDME. A Teflon sleeve over the capillary inlet allowed a large volume drop to be held stably during extraction. By in‐line coupling 10 min SDME and sweeping of a 30 nL sample using a cationic surfactant dodecyltrimethylammonium, enrichment factors of the double preconcentration were increased up to 32 000.     

1-甲基-2-咪唑醛肟锰(Ⅲ)配合物的合成、晶体结构及电化学性质研究

采用溶剂扩散法制备了锰(Ⅲ)的两个单核配合物[Mn(Miao)2(H2O)2]ClO4(1)和[Mn(Miao)2(DMF)2]ClO4(2)(HMiao=1-甲基-2-咪唑醛肟,DMF=N,N-二甲基甲酰胺)的晶体.X射线衍射单晶结构表明:两种配合物均属三斜晶系,空间群Pi锰与配体形成变形的八面体结构.采用Gaussian 03W程序计算了HMiao配体的电荷密度,理论计算与实际配位形式完全吻合.测定了两种锰配合物在DMF溶液中的电化学性质,循环伏安法表明两配合物均存在较好的氧化还原性,其氧化还原峰分别为0.75和0.70V,-0.32和-0.50 V,是Mn(Ⅲ)和Mn(Ⅱ)之间的相互转化.     

Encapsulation of β-cyclodextrin by in situ polymerization with vinyl chloride leading to suppressing the migration of endocrine disrupting phthalate plasticizer

We performed the encapsulation of β-cyclodextrin (β-CD) in PVC by in situ polymerization with vinyl chloride monomer (VCM), and investigated the effect of CD encapsulation on the suppression of dioctyl phthalate (DOP) migration suspected as endocrine disruptor. β-CD was partially modified with 3-(methacryloxy)propyl trimethoxysilane and modified β-CD (MCD) was then encapsulated in PVC through suspension polymerization via radical reaction between double bonds MCD and VCM. Resulting MCD-encapsulated PVC (MCD_x-PVC) exhibited the similar morphology and characteristics to commercial PVC. For MCD_x-PVCs plasticized with DOP, they showed the considerably suppressed DOP migration as well as the similar optical and mechanical properties to conventionally plasticized PVC. In particular, the plasticized MCD_x-PVCs exhibited the superior suppression of DOP migration compared to the plasticized PVC where MCD and DOP were introduced by conventional melt mixing. Therefore, the encapsulation of MCD in PVC is thought to be an effective approach to producing the ecological PVC material.     

Paclitaxel‐Loaded Stabilizer‐Free Poly(D,L‐lactide‐co‐glycolide) Nanoparticles Conjugated with Quantum Dots for Reversion of Anti‐Cancer Drug Resistance and Cancer Cellular Imaging

We prepared the PLGA‐loaded anti‐cancer drug and coated it with quantum dots to make it a dual‐function nanoparticles, and analyzed its potential use in cellular imaging and curing cancers. Two cancer cell lines, paclitaxel‐sensitive KB and paclitaxel‐resistant KB paclitaxel‐50 cervical carcinoma cells, were the relativistic models for analysis of the cytotoxicity of free paclitaxel and paclitaxel‐loaded PLGA conjugated with quantum‐dot nanoparticles. The paclitaxel‐loaded PLGA conjugated with quantum dots nanoparticles were significantly more cytotoxic than the free paclitaxel drug in paclitaxel‐resistant KB paclitaxel‐50 cells. This might have been because the cancer cells developed multi‐drug resistance (MDR), which hampered the action of free paclitaxel by pumping its molecules to extracellular areas. Addition of verapamil, a P‐glycoprotein inhibitor, reversed the MDR mechanism and significantly reduced KB paclitaxel‐50 cell viability. As a result, KB paclitaxel‐50 was highly associated with MDR on the cell membrane. The cytotoxicity results indicated that PLGA nanoparticles served as drug carriers and protected the drugs from MDR‐accelerated efflux. Combined quantum dots with PLGA nanoparticles allowed additional functionality for cellular imaging.     

Development of a Sensitive LC Assay with Fluorescence Detection for the Determination of Zearalenone in Rat Serum

A simple and sensitive liquid chromatographic assay with fluorescence detection assay was developed for the determination of zearalenone levels in rat serum. The assay utilized a single liquid–liquid extraction with t-butyl methyl ether and isocratic elution using a mobile phase consisting of acetonitrile and 0.1% triethylamine in distilled water (pH = 6) (50:50, v/v). Linearity was observed over a concentration range from 10 to 1,000 ng mL^?1 (r = 0.9995), with the limit of quantification at 10 ng mL^?1 with 100 μL of rat serum. The validated assay was applied to a pharmacokinetic study in rats.