An MO-theoretical calculation of solvent effect upon the NH3 + HF = NH4F reaction

An ab initia molecular orbital calculation was done as to a reacting system, NH₃+HF=NH₄F, with the inclusion of the solvent effect as the origin of dipolar field. The reactants were assumed to stay in dimers, (NH₃)₂ and (HF)₂, in advance to the reaction, and the respective partners of two reactants were regarded as point dipoles. The system was stabilized to some extent by two dipoles adopted. A study of configuration analysis on this system was made with and without the dipoles. Their effect was found to be favorable for proceeding of the reaction.     

Neutron activation analysis of mercury contents in head hair of dentists in Japan

Mercury contents in head hair of 58 dentists employed at the NUSD hospital and 50 dentists employed at the private hospitals or clinics were determined using neutron activation analysis. The arithmetic means were 5.8 ppm and 5.2 ppm, and geometric means were 5.4 ppm and 4.8 ppm, respectively. They were much lower than the values reported in the past year, and agreed well with those of normal Japanese men of the same age. Therefore, it was concluded that the mercury pollution in the working environment of dentists might be practically non-existent in Japan today.     

Cationic polymerization of formaldehyde in liquid carbon dioxide. Part II: A kinetic study of the polymerization

The kinetic behavior on the polymerization of formaldehyde with and without acidic catalyst, in liquid carbon dioxide, in the temperature range of 30 to 50°C. was investigated. In the polymerization without catalyst both the polymer yield and the degree of polymerization increased with reaction time and also with rising temperature. With acidic catalyst, such as acetic acid and dichloroacetic acid, both the polymer yield and the degree of polymerization increased more than that in the polymerization without catalyst. The overall rate of polymerization with and without acidic catalyst was expressed by the first-order rate equation with respect to monomer concentration. From the results it was concluded that the polymerizations belonged to a type of successive polymerization with rapid initiation and no termination. The rate constant and the activation energy of each elementary process of polymerization were estimated on the basis of the results.     

THE ROLE OF DIOXYGEN SPECIES IN THE BASE- AND COBALT-CATALYZED OXYGENATION OF HINDERED PHENOLS

Abstract— The mechanisms by which 4-substituted 2,6-di- t -butylphenols are oxygenated by base- and Co(II) Schiff base complex-catalysis into o - or p -peroxyquinols and their Co(III) complexes, respectively, have been investigated. For the base-catalyzed oxygenation, a one-step ionic mechanism involving no radical species is suggested to be the most probable one. For the formation of the peroxycobalt(III) complexes, the following stoichiometry is concluded: ArOH + Co(II) + 5/4 O₂→ peroxycobalt(III) complex + 1/2 H₂O. A mechanism involving an electron transfer between the phenols and the Co(II)-O₂ complex followed by further electron transfer between the formed phenoxy radicals and the Co(II) complex to give the corresponding phenolate anions is proposed.     

Kinetic study of the γ radiolysis of polyethylene

A kinetic study was made of the formation of hydrogen and trans-vinylene unsaturation in the radiolysis of polyethylene induced by γ rays with a dose rate of 6.35 × 10⁵ rad/hr at 30–100°C in vacuo. The rates of the formation of hydrogen and trans-vinylene unsaturation were described by the zero-order formation kinetics with respect to each concentration combined with the first-order disappearance. The apparent rate constant for the formation of hydrogen increased gradually with rising irradiation temperature to give the activation energy of 0.6 kcal/mole. On the other hand, those for the disappearance of hydrogen and the formation and disappearance of trans-vinylene unsaturation were almost independent of temperature. The G values for crosslinking and main-chain scission were obtained from the gel data by using the Charlesby-Pinner equation, and the activation energy of 1.5 kcal/mole was given for both of them. On the basis of these results the reactions induced by γ rays in solid polyethylene were discussed.     

Preparation of crystalline polyamides by the alternating copolymerization of aziridines and cyclic imides

The copolymerization of aziridines and cyclic imides was studied. Aziridines copolymerized alternately with cyclic imides to give crystalline polyamides. Ethylenimine and succinimide copolymerized to nylon 2,4, melting near 300°C., without any catalyst. Similarly, the corresponding crystalline polyamides were obtained from the systems of 1,2-propylenimine–succinimide, ethylenimine–glutarimide, and ethylenimine–phthalimide. The copolymerization of aziridines and cyclic imides in the presence of BF₃OEt₂ gave a copolymer which was rich in aziridine units, whereas, the addition of triethylamine had no influence on the copolymer composition. A mechanism of copolymerization was proposed based on the facts that N-tetramethylenesuccinamide was obtained by the reaction of pyrrolidine and succinimide, N-acetylethylenimine reacted with acetamide to yield N,N′-diacetylethylenediamine and that the rate of this copolymerization was dependent on the electrophilicity of imide.     

An investigation on a broad infrared band with the maximum at approximately 1300 cm(-1) in magnesia cement,phase 3

In magnesia cement, phase 3, a broad and strong infrared band was observed with the maximum at approximately 1300 and 1050 cm(-1) in the H and D systems, respectively. To clarify the origin of the 1300 cm(-1) band the temperature dependency of the infrared spectra of the H system was observed and the spectra analyzed on the basis of a strong vibrational coupling of the OH stretching with lattice modes. The fitting was quite well, giving rise to the origin of the 1300 cm(-1) band of the OH stretching.     

Synthesis of optically active (+)-19-nortestosterone by asymmetric bis-annulation reaction

Michael reaction of 1,7-pctadien-3-one with 2-methylcyclopentane-1,3-dione, followed by intramolecular aldol condensation promoted by L-amino acids produced the optically active (+)-4-(3-butenyl)-7a-methyl-5,6,7,7a-tetrahydroindane-1,5-dione in high chemical and optical yields. The PdCl₂-catalyzed oxidation of the terminal double bond gave the methyl ketone, which had 76% optical purity and was made 100% optically pure by recrystallization. Then aldol condensation afforded the tricyclic ketone, which was alkylated with 3-butenyl iodide to afford (?)-3β-t-butoxy-2,3,3a,4,5,7,8,9,9aβ,9bα-decahydro-6-(3-butenyl)-3aβ-methyl-1H-benz[e]inden-7-one. The synthesis of this compound means the total synthesis of (+)-19-nortestosterone.     

Synthesis and characterization of polystyrene‐b‐poly (1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups

Polystyrene‐b‐poly(1,2‐isoprene‐ran‐3,4‐isoprene) block copolymers with azobenzene side groups were synthesized by the esterification of azobenzene acid chloride with polystyrene‐b‐hydroxylated poly(1,2‐isoprene‐ran‐3,4‐isopenre) block copolymers for creating new photochromic materials. The resulting block copolymers with azobenzene side groups were characterized for structural, thermal, and morphological properties. IR and NMR spectroscopies confirmed that the polymers obtained had the expected structures. Differential scanning calorimetric measurements by heating runs clearly showed the glass transitions of polystyrene and polyisoprene main chains and two distinct first‐order transitions at temperatures of azobenzene side groups around 48 and 83 °C. The microstructure of these block copolymer films was investigated using both transmission electron microscopy (TEM) and near‐field optical microscopy (NOM). TEM images revealed typical microphase‐separated morphologies such as sphere, cylinder, and lamellar structures. The domain spacing of microphase‐separated cylindrical morphology in the NOM image agreed with that of the TEM results. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2406–2414, 2002     

Electrochemical synthesis of a polypyrrole thin film with supercritical carbon dioxide as a solvent

A conductive polypyrrole (PPy) film was successfully synthesized in a homogeneous supercritical carbon dioxide (scCO2)/acetonitrile (AN) system. The occurrence of a homogeneous supercritical state was confirmed by observations of the phase behavior of the system through a high-pressure cell with a viewing window. The concentration of a supporting electrolyte, tetrabutylammonium hexafluorophosphate (TBAPF6), significantly changed the phase behavior of the scCO2/AN system. The polymerization rate of the film in that system decreased with further addition of CO2. This result suggested that the low viscosity of scCO2 did not play an important role in improving the growth rate of the PPy film. The low polymerization rate might have been due to the electron-transfer resistance arising from the low dielectric constant of scCO2/AN mixture. The roughness of the film prepared in the homogeneous scCO2/AN system was 1/10 that synthesized in AN itself as a solvent. The slow growth of film and the high diffusion rate of the monomer seemed to account for the smooth flat film formation.