Efficient Synthesis of Polycyclic γ-Lactams by Catalytic Carbonylation of Ene-Imines via Nickelacycle Intermediates

The nickel(0)-catalyzed carbonylative cycloaddition of 1,5- and 1,6-ene-imines with carbon monoxide (CO) is reported. Key to this reaction is the efficient regeneration of the catalytically active nickel(0) species from nickel carbonyl complexes such as [Ni(CO)₃L]. A variety of tri- and tetracyclic γ-lactams were thus prepared in excellent yields with 100 % atom efficiency. Preliminary results on asymmetric derivatives promise potential in the synthesis of enantioenriched polycyclic γ-lactams.     

Total Synthesis of Lajollamycin B

The first total synthesis of lajollamycin B, a structurally novel nitro-tetraene spiro-β-lactone/γ-lactone antibiotic, is described. The convergent synthesis involves the construction of the C8′–C11′ nitrodienylstannane and its coupling with the segment prepared from the C1′–C7′ ω-iodoheptadienoic acid and the right-hand heterocyclic fragment, which has been utilized for our previous syntheses of oxazolomycin A. The revision of the geometry of the terminal Δ^{10′, 11′}-double bond from E to Z is also described for the structure of natural lajollamycin B.     

Effect of ammonium groups on the properties and alkaline stability of poly(arylene ether)‐based anion exchange membranes

Five kinds of ammonium groups functionalized partially fluorinated poly(arylene ether) block copolymer membranes were prepared for investigating the structure–property relationship as anion exchange membranes (AEMs). Consequently, the pyridine (PYR)‐modified membrane showed the highest alkaline and hydrazine stability in terms of the conductivity, water uptake, and dry weight. The chloromethylated precursor block copolymers were reacted with amines, such as trimethylamine, N‐butyldimethylamine, 1‐methylimidazole, 1,2‐dimethylimidazole, and PYR to provide the target quaternized poly(arylene ether)s. The structures of the polymers, as well as model compounds and oligomers were well characterized by ¹H NMR spectra. The obtained AEMs were subjected to water uptake and hydroxide ion conductivity measurements and stabilities in aqueous alkaline and hydrazine media. The pyridinium‐functionalized quaternized polymers membrane showed the highest alkaline and hydrazine stability with minor losses in the conductivity, water uptake, and dry weight. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 383–389     

Simultaneous determination of testosterone, cortisol, and dehydroepiandrosterone in saliva by stable isotope dilution on-line in-tube solid-phase microextraction coupled with liquid chromatography–tandem mass spectrometry

We have developed a simple and sensitive method for the simultaneous determination of testosterone (TES), cortisol (CRT), and dehydroepiandrosterone (DHEA) in saliva by automated online in-tube solid-phase microextraction (SPME) coupled with liquid chromatography–tandem mass spectrometry (LC–MS/MS) using a Discovery HS F5 column. The optimum in-tube SPME conditions were 25 draw/eject cycles of 40 μL of sample at a flow rate of 200 μL/min using a Supel-Q PLOT capillary column as an extraction device. The extracted compounds were easily desorbed from the capillary by passage of the mobile phase, and no carryover was observed. The in-tube SPME LC–MS/MS method showed good linearity with correlation coefficients r?≥?0.9998 for TES, CRT, and DHEA using their respective stable isotope-labeled internal standards. The intra-day and inter-day precisions (relative standard deviations) were below 4.9 and 8.5 % (n?=?5), respectively. This method was successfully utilized to analyze TES, CRT, and DHEA in saliva samples without any other pretreatment or interference peaks, and the quantification limits (S/N?=?10) of TES, CRT and DHEA were about 0.01, 0.03 and 0.29 ng/mL saliva, respectively. The recoveries of these compounds spiked into saliva samples were each above 94 %. This method was applied to analyze changes in salivary TES, CRT, and DHEA levels resulting from stress and fatigue load.     

Site-specific C content by quantitative isotopic C Nuclear Magnetic Resonance spectrometry: A pilot inter-laboratory study

Isotopic ¹³C NMR spectrometry, which is able to measure intra-molecular ¹³C composition, is of emerging demand because of the new information provided by the ¹³C site-specific content of a given molecule. A systematic evaluation of instrumental behaviour is of importance to envisage isotopic ¹³C NMR as a routine tool. This paper describes the first collaborative study of intra-molecular ¹³C composition by NMR. The main goals of the ring test were to establish intra- and inter-variability of the spectrometer response. Eight instruments with different configuration were retained for the exercise on the basis of a qualification test. Reproducibility at the natural abundance of isotopic ¹³C NMR was then assessed on vanillin from three different origins associated with specific δ¹³C_i profiles. The standard deviation was, on average, between 0.9 and 1.2‰ for intra-variability. The highest standard deviation for inter-variability was 2.1‰. This is significantly higher than the internal precision but could be considered good in respect of a first ring test on a new analytical method. The standard deviation of δ¹³C_i in vanillin was not homogeneous over the eight carbons, with no trend either for the carbon position or for the configuration of the spectrometer. However, since the repeatability for each instrument was satisfactory, correction factors for each carbon in vanillin could be calculated to harmonize the results.     

A Novel Tetranuclear Organotin(IV) Carboxylate with Chain Structure: Synthesis,Crystal Structure,and Characterizations

A new tetranuclear organotin carboxylate {[(n‐Bu₂SnO)₂L]₂}_n (complex 1 ) was synthesized by the reaction of di‐n‐butyltin oxide with (p‐carboxymethoxy‐phenoxy) acetic acid (LH₂) and characterized by elemental analyses: IR, UV–visible, ¹H, ¹³C, ¹¹⁹Sn NMR spectroscopy and single crystal X‐ray study. X‐ray crystallography diffraction data revealed that the complex 1 was polymeric fashion with a chain structure containing a ladder‐like tetranuclear organo‐oxotin cluster. In the complex 1 , the ligand LH₂ is coordinated to the central tin(IV) atoms via the carboxylato‐O atoms. The tetranuclear tin system is formed by the bridges through the carbonyl oxygen atom of the carboxylate moieties and making the tin atom of pentacoordinated in distorted trigonal bipyramidal geometry. Single crystal X‐ray data indicate that the complex 1 crystallized in the cubic system with the space group C₂/c.     

Improved Synthesis,Structure, and Solution Characterization of the Cyclic 48-Tungsto-8-Arsenate(V), [H4As8W48O184]36−

We report on an improved synthesis and structural characterization of the cyclic 48-tungsto–8-arsenate(V) [H₄As₈W₄₈O₁₈₄]^36? (1). The mixed lithium–potassium salt of this polyanion, K_26.5Li_9.5[H₄As₈W₄₈O₁₈₄]·90H₂O (KLi-1), has been studied in the solid state by IR, single-crystal X-ray diffraction, and elemental analysis, and in solution by ¹⁸³W NMR spectroscopy.     

Systematic Tuning and Switching of Neutral and Ionic Phases in a Donor–Acceptor Chain Compound by Doping with Less‐Active Donors and by Pressure Application

The temperature‐induced stepwise neutral–ionic (N–I) phase transition in the covalently bonded donor–acceptor chain compound [Ru₂(2,3,5,6‐F₄PhCO₂)₄DMDCNQI] ? 2(p‐xylene) (2,3,5,6‐F₄PhCO₂^?=2,3,5,6‐tetrafluorobenzoate; DMDCNQI=2,5‐dimethyl‐N,N′‐dicyanoquinodiimine) was systematically tuned over a wide temperature range using two techniques: 1) A chemical technique based on doping with a less‐active donor unit [Ru₂^II,II(F₅PhCO₂)₄] (F₅PhCO₂^?=pentafluorobenzoate), thereby providing an isostructural doped series [{Ru₂^II,II(2,3,5,6‐F₄PhCO₂)₄}_1?x{Ru₂^II,II(F₅PhCO₂)₄}_xDMDCNQI] ? 2(p‐xylene), with x=0.06, 0.10, 0.21, and 0.24; and 2) a physical technique, which was the application of hydrostatic pressure to the doped compounds. The stepwise N–I transition observed in the original compound was systematically varied in terms of the viewpoints of both transition temperature and transition features (stepwise or monotonic) dependent on the amount of dopants x. Application of pressure efficiently tuned the N–I transitions, with the oxidation phases being dramatically modified by applying only weak pressure up to 4 kbar. Even in cases that led to N–I transitions in small domains of the chains at ambient pressure, the application of pressure caused an expansion of the domains that enabled N–I transitions, finally leading to a complete change in the oxidation state of the chains, from neutral to ionic, accompanied by a change from a paramagnetic state to a ferrimagnetically ordered state.