Effects of graded porous structure on local strain distribution under compression in silicone rubber

Silicone rubber samples with gradually changing pore sizes within the range of 70–610 μm are produced using an improved spacer method. The samples are scanned using an X‐ray computed tomography to evaluate their graded structure as compared to uniform rubber. A compressive test reveals that graded porous silicone rubber has characteristic stress–strain curves whose slope changes within a specific strain range depending on the porous structure. Analysis results of local strain based on a digital image correlation of the graded porous silicone rubber under compression demonstrate that the characteristic stress–strain properties are caused by shifts in the main deformation region in the graded structure. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1033–1042     

Rhodium-Catalyzed ortho-Bromination of O-Phenyl Carbamates Accelerated by a Secondary Amide-Pendant Cyclopentadienyl Ligand

It has been established that a newly developed cyclopentadienyl rhodium(III) [Cp^ARh^III] complex, bearing an acidic secondary amide moiety on the Cp ring, is able to catalyze the ortho-bromination of O-phenyl carbamates with N-bromosuccinimide (NBS) at room temperature. The presence of the acidic secondary amide moiety on the Cp^A ligand accelerates the bromination by the hydrogen bond between the acidic NH group of the Cp^A ligand and the carbonyl group of NBS.     

Ion-Selective Electrodes Based on Bilayer Film Coating

The electrode characteristics of ion-selective electrodes (ISEs) for K⁺, Na⁺, NH₄ ⁺, and Ca²⁺ based on bilayer film coatings, where the inner layer films are electroactive electropolymerized ones and the outer layer films are composed of conventional ion-sensitive materials, have been examined. These ISEs of the coated-wire electrode type have no conventional internal reference solution and reference electrode, but the inner films may be considered to function as the “internal standard solution.” The ion selectivity coefficients and the activity range showing Nernstian response were almost comparable to those of conventional liquid-membrane electrodes. The bilayer-coated ISEs showed insensitivity to O₂ and CO₂, long-term stability, and little drift. It was also found that the electrode performance is practically unchanged after sterilization in an autoclave. The results demonstrate that the bilayer-coated ISEs examined are promising for the determination of K⁺, Na⁺, NH₄ ⁺, or Ca²⁺ activity in biological and environmental systems.     

Voltammetric Determination of Boric Acid Using the Ternary Complexation System with Salicylaldehyde and H‐Acid

A square‐wave voltammetric method for the determination of boric acid in water has been described based on the new understanding of the electrochemical behavior of boric acid‐Azomethine H complexation. Salicylaldehyde and H‐acid were used as the starting materials of boric acid‐Azomethine H complex and their concentrations were optimized for boric acid determination in water. A glassy carbon electrode, instead of a conventional mercury electrode, was used in the measurement. The detection limit of the proposed method was 0.10 mg B dm^?3. The proposed method was successfully used for boric acid determination in the water from a seawater desalination RO plant.     

Pressure-Induced Solidification of 1-Butyl-3-methylimidazolium Tetrafluoroborate

We have used Raman spectroscopy to investigate the high-pressure phase behavior of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), a representative ionic liquid, at pressures up to ~7.5 GPa. We have also studied how increasing pressure leads to conformational changes in the [bmim]⁺ cation. We have found that liquid [bmim][BF₄] undergoes pressure-induced solidification (freezing) into a superpressed (metastable) state at 2.5 GPa; another structural change probably occurs at ~6 GPa. Remarkably, conformational changes in the [bmim]⁺ cation between trans and gauche conformers are concordant with the metastable structural changes of [bmim][BF₄]. As the pressure is increased from ambient, the fraction of gauche conformers increases, but the gauche fraction decreases above the solidification pressure (2.5 GPa), and slope of the gauche/trans ratio changes again above 6 GPa. We interpret these results in terms of the fragility of the ionic liquid.     

Photodynamic Activity on Biofilm in Endotracheal Tubes of Patients Admitted to an Intensive Care Unit

Ventilator-associated pneumonia (VAP) is an infection that arises after endotracheal intubation affecting patients under intensive care. The presence of the endotracheal tube (ETT) is a risk factor since it is colonized by multispecies biofilm. Antimicrobial photodynamic therapy (aPDT) could be a strategy to decontaminate ETTs. We verify if methylene blue (MB) associated with external illumination of the ETT could be an alternative to destroy biofilm. We performed an in vitro and ex vivo study. In vitro study was performed with P. aeruginosa biofilm grew over ETT for 7 days. After treatment, the surviving cells were cultured for 3 days and the biofilm was analyzed by crystal violet absorbance. Ex vivo study employed ETT obtained from extubated patients. aPDT was performed with MB (100 µm ) and red LED (λ = 640±20 nm). We quantified the biofilm thickness and used scanning electron microscopy and fluorescence technique to verify morphological and functional changes after aPDT. Our results showed that bacteria remain susceptible to aPDT after sequential treatments. We also attested that aPDT can reduce biofilm thickness, disrupt biofilm attachment from ETT surface and kill microbial cells. These data suggest that aPDT should be investigated to decrease VAP incidence via ETT decontamination.     

Simultaneous Delamination and Rutile Formation on the Surface of Ti3C2Tx MXene for Copper Adsorption

In this work, we studied the formation of the rutile phase of titanium dioxide (TiO₂) on delaminated MXene (d‐Ti₃C₂T_x) flakes by the reaction of Ti₃C₂T_x with amino acids in water. Three types of amino acids with varied side‐chain polarity were used to delaminate Ti₃C₂T_x. d‐Ti₃C₂T_x flakes formed stable colloidal solutions due to the negative surface charges of chemisorbed amino acids on the d‐Ti₃C₂T_x. Rutile formed on d‐Ti₃C₂T_x at room temperature upon the intercalation of aromatic amino acids and subsequent sonication of the solution, while flakes intercalated with aliphatic amino acids did not oxidize. X‐Ray diffraction (XRD), transmission electron microscopy (TEM) and Raman spectroscopy revealed the nanosize rutile formation on the surface of Ti₃C₂T_x flakes. The XPS results indicated the surface functionalization of histidine on d‐Ti₃C₂T_x flakes. As‐synthesized histidine functionalized rutile TiO₂@d‐Ti₃C₂T_x hybrid was used for adsorption of Cu²⁺ ions from aqueous solution with a maximum uptake of 95 mg g^?1.     

Optimization of operating conditions in a high-shear mixer using dem model: determination of optimal fill level

For the purpose of evaluating optimal fill level of starting materials in a high-shear mixer, discrete element method (DEM) simulation was conducted to visualize kinetic status between particles. The simulation results obtained by changing fill levels were used to determine solid fraction of particles, particle velocity, particle velocity vector, and kinetic energy and discuss the flow pattern. Optimal fill level was obtained from the information on these matters. It was pointed out that understanding the kinetic energy between particles in an agitating vessel was effective in determining the optimal fill level. Granulation experiment was conducted to validate the optimal fill level obtained by the simulation, confirming the good agreement between these two results. It was pointed out that determination of kinetic energy between particles through the simulation was effective in obtaining an index of the kinetic status of particles. Further, it was confirmed that the simulation could provide more information than conventional granulation experiments could provide and also helpful in optimizing the operating conditions.