Trapping effect of eugenol on hydroxyl radicals induced by L-DOPA in vitro

Many researchers have stated that eugenol might inhibit lipid peroxidation at the stage of initiation, propagation, or both, and many attempts have been made to elucidate the mechanism of its antioxidant activity. Nevertheless, details of its mechanism are still obscure. This study was carried out to investigate the trapping effect of eugenol on hydroxyl radical generated from L-3,4-dihydroxyphenylalanine (DOPA) in MiliQ water and the generation mechanism of the hydroxyl radical by this system which uses no metallic factor. This was studied by adding L-DOPA and 5,5-dimethyl-1-pyrroline N-oxide (DMPO) to phosphate buffered saline (PBS) or MiliQ water, and the generation of hydroxyl radical was detected on an ESR spectrum. By this method, the effect of antioxidants was detected as a modification of ESR spectra. We found that the eugenol trapped hydroxyl radicals directly, because it had no iron chelating action, did not trap L-DOPA semiquinone radical and inhibited hydroxyl radicals with or without iron ion.     

Polyether-bridged sexithiophene as a complexation-gated molecular wire for intramolecular photoinduced electron transfer

The porphyrin-sexithiophene-fullerene triad 2, where the two central thiophene units of the sexithiophene spacer are bridged with a crown-ether-like polyether chain, undergoes efficient intramolecular electron transfer from the photoexcited porphyrin moiety to the fullerene through the sexithiophene. However, complexation with a sodium cation in the crown ether ring causes complete suppression of electron transfer as a result of a drastic conformational change of the sexithiophene backbone. Furthermore, decomplexation resumes the photoinduced electron transfer. This on/off switching phenomenon indicates that the polyether-bridged sexithiophene can function as a complexation-gated molecular wire.     

Arrangement of ad-atoms of various kinds on substrates: Part II. Iridium and rhodium

The number of iridium sites and that of rhodium sites occupied by a foreign atom was determined with the aid of the pulse technique. In the case of iridium the foreign atoms included are Cu, Ag, Cd, Hg, In, Tl, Pb, Se, Te, As and Bi. The approximate value is 1 for the first two, 2 for the next five and 2.5–2.7 for the others. In the case of rhodium substrate, the foreign atoms included are Cu, Ag, Cd, Hg, In, Tl, Ge, Pb, As, Sb, Se, Te, and Bi. The approximate value is 1 for the first two, 2 for the next six, 2.4–2.6 for the next four and 3.0 for the last one. Silver and copper ad-atoms are closely packed both on the iridium and rhodium surface, but the ad-atoms of the other elements are arranged on the surfaces leaving empty sites for geometrical reasons, even when the monolayer is apparently complete.     

Studies on the biosynthesis of terrecyclic acid A II confirmation of the cyclization mechanism and hydrogen shifts using [2-2H3]acetate and [213C2H3]acetate

Feeding experiments with [2-³H₃]acetate and [2-¹³C²H₃]acetate in $\text{Aspergillus terreus}$ Thom No. 14 indicated that the hydrogen at C-2 in terrecyclic acid A is incorporated without migration from the precursor acetic acid; the results favour our group's earlier speculation for the cyclization to the tricyclic skeleton in the biosynthetic scheme.     

Determination of selenium in sediments by hydride generation atomic absorption spectrometry. Elimination of interferences

Summary The hydride generation/atomic absorption spectrometry (AAS) with an automated flow system is useful for the routine analysis of selenium in environmental samples. This method is, however, subject to interferences from transition metal ions and other hydride forming ions. The conditions to minimize the interferences were established: the concentration of hydrochloric acid 6 mol/l; the concentration of tetrahydroborate 0.5%. Iron(III) chloride released the depression of selenium signals by metal ions such as copper(II) and bismuth(III). Selenium in several standard reference materials including sediment samples was determined by the present method and by fluorimetry with 2,3-diaminonaphthalene. The results obtained by the two methods agreed with an acceptable precision. This means that hydride generation/AAS offers good precision and accuracy in the determination of selenium in sediment samples as well as DAN fluorimetry. However, the former is much simpler in operation. The method was applied to the determination of selenium in estuarine sediments collected in Nagoya harbor and Ise Bay. The results can be used to assess the pollution state of these places.

---

Selenbestimmung in Sedimenten durch AAS mit Hydriderzeugung. Eliminierung von Störungen

     

Vinyl polymerization. 275. Polymerization of vinyl monomers photosensitized by tetramethyltetrazene

A study of the photopolymerization of vinyl monomers in the presence of tetramethyltetrazene (TMT) was made. TMT was found to act as an effective sensitizer. In the photopolymerization of vinyl monomers such as methyl methacrylate or styrene the rate of polymerization was expressed by the equation: R_p = k[TMT]^1/2[monomer]. The chain-transfer constant of TMT under ultraviolet irradiation was estimated to be 3.8 × 10^?2 for the above monomers. A linear correlation was found to exist between the reactivity of dimethylamino radical toward the vinyl monomers and e values for the corresponding monomers.     

Mapping analyses of Fe-diffused mc-Si using M?ssbauer microscope and photoluminescence

Twenty CK chondrites collected in the Antarctica Continent were characterized by inductively-coupled plasma mass spectrometry (ICP-MS), prompt gamma ray analysis (PGA), instrumental neutron activation analysis (INAA), X-ray diffractometry (XRD) and ⁵⁷Fe-M?ssbauer spectroscopy. As a result of elemental analysis, it was revealed that 18.2~26.4 mass% of iron was included in the each chondrite. M?ssbauer spectrum of LEW86258, classified as a typical CK chondrite, was found to be composed of two paramagnetic doublets and two magnetic sextets. M?ssbauer spectra were assigned to the absorption due to forsterite (Mg_1.36Fe_0.64SiO₄) and magnetite (Fe₃O₄), as also confirmed by XRD. XRD study of LAP03834, reclassified from CK to R chondrite, revealed the presence of crystalline phase due to forsterite. These results indicate that LAP03834 and related chondrites, i.e., MET01149, LAP03923 and MAC02453, should be reclassified as R or LL chondrite.     

Synthesis and Hydrolysis of Polymers Having Anesthetic or Amantadine Residues in Sidechains

The polymerizable derivatives of chemotherapeutic agents such as benzocaine, procaine, and amantadine were prepared and free-radical copolymerized with styrene or methyl methacrylate in order to obtain polymers with pharmacological activity and increased duration of action of the drugs. The monomeric and polymeric derivatives were subjected to hydrolysis in vitro in order to measure the release of the active ingredient.     

An analytical method for measuring α‐amylase activity in starch‐containing foods

The quality of starch‐containing foods may be significantly impaired by contamination with very small amounts of α‐amylase, which can enzymatically hydrolyze the starch and cause viscosity loss. Thus, for quality control, it is necessary to have an analytical method that can measure low amylase activity. We developed a sensitive analytical method for measuring the activity of α‐amylase (from Bacillus subtilis) in starch‐containing foods. The method consists of six steps: (1) crude extraction of α‐amylase by centrifugation and filtration; (2) α‐amylase purification by desalting and anion‐exchange chromatography; (3) reaction of the purified amylase with boron‐dipyrromethene (BODIPY)‐labeled substrate, which releases a fluorescent fragment upon digestion of the substrate, thus avoiding interference from starch derivatives in the sample; (4) stopping the reaction with acetonitrile; (5) reversed‐phase solid‐phase extraction of the fluorescent substrate to remove contaminating dye and impurities; and (6) separation and measurement of BODIPY fluorescence by HPLC. The proposed method could quantify α‐amylase activities as low as 10 mU/mL, which is enough to reduce the viscosity of starch‐containing foods. Copyright © 2012 John Wiley & Sons, Ltd.     

Quinoid-Aromatic Resonance for Very Small Optical Energy Gaps in Small-Molecule Organic Semiconductors: A Naphthodithiophenedione-oligothiophene Triad System

Organic semiconductors with very small optical energy gaps have attracted a lot of attention for near-infrared-active optoelectronic applications. Herein, we present a series of donor-acceptor-donor (D−A−D) organic semiconductors consisting of a highly electron-deficient naphtho[1,2-b:5,6-b′]dithiophene-2,7-dione quinoidal acceptor and oligothiophene donors that show very small optical energy gaps of down to 0.72 eV in the solid state. Investigation of the physicochemical properties of the D−A−D molecules as well as theoretical calculations of their electronic structures revealed an efficient intramolecular interaction between the quinoidal acceptor and the aromatic oligothiophene donors in the D−A−D molecules; this significantly enhances the backbone resonance and thus reduces the bond length alternation along the π-conjugated backbones. Despite the very small optical energy gaps, the D−A−D molecules have low-lying frontier orbital energy levels that give rise to air-stable ambipolar carrier transport properties with hole and electron mobilities of up to 0.026 and 0.043 cm² V⁻¹ s⁻¹, respectively, in field-effect transistors.