Low loaded Pt-Co catalyst surfaces optimized by magnetron sputtering sequential deposition technique for PEM fuel cell applications: physical and electrochemical analysis on carbon paper support

A series of thin Pt-Co films with different metal ratios were deposited by using the sequential cosputtering directly on a commercial hydrophobic carbon paper substrate at room temperature and in ultra-high vacuum (UHV) conditions. Their electrocatalytic properties toward the oxygen reduction reaction were investigated in 0.5 M H₂SO₄ solution by means of cyclic voltammetry (CV) and linear sweep voltammetry (LSV) on rotating disc electrode (RDE). The results showed that Pt particles, deposited by dc-magnetron gun, surround the large Co-clusters deposited by rf-magnetron gun. In addition, the increase of Co content led to an increase in the electrochemical active surface area (EASA) from 23.75 m²/gPt to 47.54 m²/gPt for pure Pt and Pt:Co (1:3), respectively, which corresponded the improvement of the utilization of Pt by a factor of 1.91. This improvement indicated that the sequential magnetron cosputtering was one of the essential technique to deposit homogeneous metal clusters with desirable size on the gas diffusion layer by adjustment plasma parameters.     

Room-temperature magnetoresistance in CoFeB/STO/CoFeB magnetic tunnel junctions

A series of Co₄₀Fe₄₀B₂₀/SrTiO₃/Co₄₀Fe₄₀B₂₀ magnetic tunnel junctions with a bottom-pinned synthetic antiferromagnet have been prepared by sputtering. Devices optimally annealed at 325 °C exhibit an exchange bias of about 65 mT, and a tunnel magnetoresistance of 2%. The smaller than predicted effect is attributed to the lack of epitaxy between the crystallized CoFeB electrodes and the SrTiO₃ (STO) barrier, due to poor crystal quality of the barrier layer. Unlike MgO, well-crystallized, oriented STO does not grow on amorphous Co₄₀Fe₄₀B₂₀.     

A novel urea conductometric biosensor based on zeolite immobilized urease

A new approach was developed for urea determination where a thin film of silicalite and zeolite Beta deposited onto gold electrodes of a conductometric biosensor was used to immobilize the enzyme. Biosensor responses, operational and storage stabilities were compared with results obtained from the standard membrane methods for the same measurements. For this purpose, different surface modification techniques, which are simply named as Zeolite Membrane Transducers (ZMTs) and Zeolite Coated Transducers (ZCTs) were compared with Standard Membrane Transducers (SMTs). Silicalite and zeolite Beta with Si/Al ratios 40, 50 and 60 were used to modify the conductometric electrodes and to study the biosensor responses as a function of changing zeolitic parameters. During the measurements using ZCT electrodes, there was no need for any cross-linker to immobilize urease, which allowed the direct evaluation of the effect of changing Si/Al ratio for the same type of zeolite on the biosensor responses for the first time. It was seen that silicalite and zeolite Beta added electrodes in all cases lead to increased responses with respect to SMTs. The responses obtained from ZCTs were always higher than ZMTs as well. The responses obtained from zeolite Beta modified ZMTs and ZCTs increased as a function of increasing Si/Al ratio, which might be due to the increased hydrophobicity and/or the acid strength of the medium.     

Synthesis and spectroscopic studies of homo-binuclear, alkoxo bridged homo- and hetero-tetranuclear metal complexes of a bis-N2O4 Schiff base ligand derived from ethanolamine and macroacyclic tetranaphthaldehyde

Three new homo-binuclear Ni(II), Cu(II), Zn(II) complexes (2-4), homo-tetranuclear Cu(II) complex (5), and hetero-tetranuclear Cu(II)-Ni(II) complex (6) of a macroacyclic potentially bis-hexadentate N2O4 Schiff base have been synthesized. The imino-alcohol ligand, H4L was obtained by the condensation of ethanolamine with 2,2'-[2,3-bis(1-formyl-2-naphthyloxymethyl)-but-2-ene-1,4-diyldioxy]bis(naphthalene-1-carbaldehyde). The structures of both the Schiff base and its complexes have been proposed by elemental analyses, spectroscopic data i.e. IR, 1H and 13C NMR, UV-vis, electrospray ionisation mass spectra, molar conductivities and magnetic susceptibility measurements. The ligand has two similar compartments to bind first primary two metal ions, and acts bi- or tetra-negative, bis-tetradentate forming five membered chelate ring. However, secondary two metal ions (either Cu2+ or Ni2+) are ligated with dianionic oxygen atoms of the alcohol groups and are linked to the 1,10-phenanthroline-nitrogen atoms in the tetranuclear complexes (5 and 6).     

Experimental analysis of true left-handed behaviour and transmission properties of composite metamaterials

We report the true left-handed transmission of a composite metamaterial (CMM) consisting of periodically stacked split-ring resonator (SRR) and wire elements. The negative permeability (μ < 0) gap is demonstrated explicitly by comparing SRR and closed-ring resonator structures. We confirm experimentally that the plasma cut-off frequency of the CMM is determined by the combined dielectric response of SRR and wire elements, and it is much lower than that of the wire-only medium. This is crucial to identify the left-handed transmission bands of the CMM. We further investigate the effect of intralayer and interlayer disorder on the transmission spectrum of CMM arising from misaligned fabrication and stacking of the SRR layers. We found that the intralayer disorder affects the μ < 0 gap of SRRs and the left-handed transmission band of CMM significantly, whereas the SRR transmission is rather immune to interlayer disorder.     

Controlling the demagnetizing field of an in-plane free layer by exchange coupling with a perpendicular multilayer

The demagnetizing field of a Co₅₀Fe₅₀ free layer in an in-planemicron-sized magnetic tunnel junction (MTJ) can be partially compensated by exchangecoupling with a [Co₉₀Fe₁₀/Pt] _N multilayer with perpendicular magnetic anisotropy via a Ru interlayer. The perpendicularanisotropy for N = 5 is optimized for nominal CoFe and Pt thicknessof 0.4 nm and 1.0 nm, respectively. An increase of tunnel magnetoresistance (TMR) from 2%to 75% is observed in MTJs as the free layer thickness, t variesfrom 1.0 nm to 3.0 nm. A phenomenological model is developed to interpret the TMRdependence in terms of the free layer magnetization rotation from in-plane to out-of-planewith decreasing t, a consequence of interlayer exchange coupling with theperpendicular multilayer. We suggest that this strategy could significantly reduce theswitching current density in such MTJs.     

Electroless synthesis of Ag nanoparticles on deposited nanostructured Si films

Two and three-dimensional Ag nanoparticle ensembles were synthesized on deposited nanostructured column-void Si films simply by film immersion into pure Ag(2)SO(4) or AgNO(3) solutions. In addition to functioning as a reducer, this nanostructured material provides immobilization and monodispersion of the Ag nanoparticles due to its systematic nanoscale topography. This is accomplished without the requirement of a surfactant, capping agent, or linker. Kinetics, as monitored from plasmon optical extinction, and infrared spectroscopy suggest accompanying oxide growth limits and finally inhibits synthesis enabling nanoparticle size control. Kinetics is also limited by Ag+ transport through the voids unless the Si film is ultrathin. Our synthesis approach offers significant advantages for surface-enhanced molecular detection, including the absence of any agents on the nanoparticle surfaces and the ability to obtain nanoparticle ensembles on any substrate.     

Spectroscopic,electrochemical, theoretical characterization and biological evaluation of a ferrocenyl-substituted unsymmetric azine ligand and its Cu(II) complex

Ferrocenyl-substituted unsymmetrical azine and its Cu(II) complex were prepared. The redox active ferrocene-based azine was obtained by condensation of 1-[(E)-hydrazono]-5-bromo-2-hydroxybenzene with ferrocene carboxaldehyde. The ferrocenyl ligand and its Cu(II) complex were characterized by IR, UV–vis, NMR, X-ray, magnetic susceptibility, molar electrical conductivity measurements, and TG techniques. The redox behaviors of the ferrocene compounds were investigated by cyclic voltammetry. Structural parameters and spectroscopic properties of the ligand and the Cu(II) complex were calculated by employing density functional theory (DFT) and time-dependent DFT and compared with available experimental data. We found slightly stronger binding ability for Cu(II) complex than the free ligand. DNA binding abilities for ferrocenyl-substituted unsymmetrical azine ligand and its Cu(II) complex are higher than some reported ferrocene compounds. We also studied DNA cleavage, superoxide and DPPH radical scavenging abilities of the compounds. Furthermore, the synthesized organometallic compounds can be bound to DNA through an intercalative mode.     

Synthesis and Optical Properties of Novel Red-Emitting PbNb<Subscript>2</Subscript>O<Subscript>6</Subscript>: Eu<Superscript>3+</Superscript> Phosphors

Undoped and PbNb₂O_6:Eu³⁺ (1.0 ≤ x ≤ 6.0 mol%) phosphors were synthesized at 1100 °C for 3.5 h by the conventional solid state reaction method. Synthesized PbNb₂O₆:Eu³⁺ phosphors were characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive spectroscopy (EDS) and Photoluminescence (PL) analyses. The PL spectra showed series of excitation peaks between 350 and 430 nm due to the 4f–4f transitions of Eu³⁺. For 395.0 nm excitation, emission spectra of Eu³⁺ doped samples were observed at 591 nm (orange) and 614 nm (red) due to the ⁵D₀ → ⁷F₁ transitions and ⁵D₀ → ⁷F₂ transitions, respectively. PL analysis results also showed that the emission intensity increased by increasing Eu³⁺ ion content. No concentration quenching effect was observed. The CIE chromaticity color coordinates (x,y) of the PbNb₂O₆:Eu³⁺ phosphors were found to be in the red region of the chromaticity diagram.