Influence of oxidized interlayers on magnetic properties of multilayer films based on amorphous ferromagnet–dielectric nanocomposites

Films of composites (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x, (Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x, (Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x and multilayer heterogeneous composite–composite structures {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + N₂]}_n, {[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x]/[(Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x + O₂]}_n, {[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x]/[(Co₄₁Fe₃₉B₂₀)_x(SiO₂)_100–x + O₂]}_n, and {[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x]/[(Co₈₄Nb₁₄Ta₂)_x(SiO₂)_100–x + O₂]}_n have been deposited using the ionbeam sputtering method with a cyclic supply of reaction gases during deposition. The structure and magnetic properties of the films have been studied. It has been shown that the introduction of an oxidized interlayer makes it possible to suppress the perpendicular magnetic anisotropy in the (Co₄₅Fe₄₅Zr₁₀)_x(Al₂O₃)_100–x composite with the metallic phase concentration higher than the percolation threshold.     

Ferrimagnetic nanoparticles for self-controlled magnetic hyperthermia

Based on the Heisenberg model including single-site uniaxial anisotropy and using aGreen’s function technique we studied the influence of size and composition effects on theCurie temperature T _C , saturationmagnetization M _S and coercivityH _C of spherical nanoparticles with astructural formulaM e _1?x Zn _x Fe₂O₄,Me = Ni, Cu, Co, Mn. It is shown that for x = 0.4–0.5and d = 10–20 nm these nanoparticles have aT _C  = 315 K and are suitable for aself-controlled magnetic hyperthermia.     

Magnetorefractive effect and giant magnetoresistance in Fe(<Emphasis Type="Italic">t</Emphasis><Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)/Cr superlattices

The magnetorefractive effect in Fe(t _x , Å)/Cr(10 Å) samples grown by molecular-beam epitaxy with a variable thickness of the iron layer (superlattices, cluster-layered nanostructures) has been studied in the IR region (λ = 2–13 µm) in s and p polarizations of light. The magnetoresistive effect in a dc magnetic field, H ≤ 32 kOe, has been measured on the same samples. The iron layer thickness required for the magnetorefractive response to appear has been found to be t _Fe ≥ 3 Å. The correlation between the magnitude of the magnetorefractive effect in the mid-IR region and magnetoresistance has been discussed.     

Morphology and composition tailoring of Co<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Fe<Subscript>3 − <Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> nanoparticles

Nano-octahedra of cobalt ferrite Co _x Fe_3???xO₄ (1?≤?x?<?2), with a broad size distribution around 15–20 nm, were synthesized by a hydrothermal method using nitrates as precursors. For the first time, single-phased nano-octahedra of cobalt-rich ferrite Co _x Fe_3???xO₄ (x?=?1.5) were synthesized. The nano-octahedra are crystallized in a normal spinel structure, with tetrahedral sites occupied by Co²⁺. This specific octahedral shape was obtained with anionic, cationic, and nonionic surfactants. The nature of the surfactant influenced the chemical composition of the powder and the size of the nano-octahedra. The {100} truncation of the octahedra is more pronounced for the small particles. For the first time, single-phased nanoparticles with as much as x?=?1.8 cobalt were synthesized with ethylene glycol as solvent. These nanoparticles, around 8 nm in size, have no specific shape and possess a lacunar spinel structure similar to maghemite. The samples were characterized by X-ray diffraction, transmission electron microscopy, and energy-dispersive spectroscopy.

Open image in new window

Graphical abstract ?

     

Single-crystalline M-type Sr Hexaferrites studied by <Superscript>57</Superscript>Fe Mössbauer spectroscopy

The ⁵⁷Fe Mössbauer spectra of the single crystalline and the finely ground Sr_1?x La _x Fe_12?y Co _y O₁₉ (x = 0 : y = 0, x = 0.192 : y = 0.152 and x = 0.456 : y = 0.225) samples have been measured to investigate the La-Co substitution effects. All observed spectra at 150 K were well fitted using the five subspectra which correspond to the five crystallographical nonequivalent Fe sites in the M-type hexaferrite, indicating that the valence changes to Fe²⁺ ions in the Fe³⁺ ions were not observed in our Sr_1?x La _x Fe_12?y Co _y O₁₉ samples. In SrFe₁₂O₁₉, the relative absorption intensities in the five subspectra show the large anisotropies in the recoilless fractions at the five Fe sites whereas these anisotropies were not observed in Sr_0.544La_0.456Fe_11.775Co_0.225O₁₉. These results indicate the chemical compositional dependence on the anisotropies of the recoilless fractions at the five Fe sites. The substitution of a Co²⁺ ion for the Fe³⁺ ion changes the center shifts of the Fe³⁺ ions near the Co²⁺ ion by the perturbation of the Fe-O-Co hybridizations. Therefore, the Co²⁺ ions occupy the 4f ₁ and the 4f ₂ sites due to the chemical compositional dependences of the refined magnetic hyperfine field and center shifts of the Fe³⁺ ions.     

Estimate of the Degree of the Spin Polarization of a Ferromagnet from Data on the Superconductor/Ferromagnet Proximity Effect

The superconductor/ferromagnet proximity effect in the Pb/Co₂Cr_1–xFe _x Al bilayer systems has been studied. Thin films of the Heusler alloy Co₂Cr_1–xFe _x Al have been prepared at different substrate temperatures. It has been established using Andreev spectroscopy of point contacts that the degree of spin polarization of conduction electrons in the Heusler alloy is on the order of 30 and 70% for the films prepared at a substrate temperature of 300 and 600 K, respectively. It has been found that the dependence of the superconducting transition temperature on the thickness of the Pb layer at a fixed thickness of the Heusler layer is determined by the degree of spin polarization of the conduction band in the ferromagnetic layer.     

XANES study of interatomic interactions in (CoFeZr)<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> (SiO<Subscript>2</Subscript>)<Subscript>1–<Emphasis Type="Italic">x</Emphasis></Subscript> nanocomposites

Analysis of the X-ray absorption near-edge structure of (Co₄₅Fe₄₅Zr₁₀)x(SiO₂)_1–x nanocomposites has shown the presence of interaction between atoms of the metallic and dielectric components in the nanocomposite. In this process, d-metal ions (Fe³⁺, Fe²⁺, Co²⁺) play the most active role. They interact with oxygen ions of the dielectric component and form not only Fe₂O₃ × CoO nanoferrites but also silicates of d metals.     

Magnetooptical,optical, and magnetotransport properties of Co/Cu superlattices with ultrathin cobalt layers

We investigated the field dependences of the magnetization and magnetoresistance of superlattices [Co(t _x, Å)/Cu(9.6 Å)]30 prepared by magnetron sputtering, differing in the thickness of cobalt layers (0.3 Å ≤ t _Co ≤ 15 Å). The optical and magnetooptical properties of these objects were studied by ellipsometry in the spectral region of hω= 0.09–6.2 eV and with the help of the transverse Kerr effect (hω= 0.5–6.2 eV). In the curves of an off-diagonal component of the tensor of the optical conductivity of superlattices with t _Co = 3–15 Å, a structure of oscillatory type (“loop”) was detected in the ultraviolet region, resulting from the exchange splitting of the 3d band in the energy spectrum of the face-centered cubic structure of cobalt (fcc Co). Based on magnetic experiments and measurements of the transverse Kerr effect, we found the presence of a superparamagnetic phase in Co/Cu superlattices with a thickness of the cobalt layers of 3 and 2 Å. The transition from superlattices with solid ferromagnetic layers to superparamagnetic cluster-layered nanostructures and further to the structures based on Co and Cu (t _Co = 0.3–1 Å) with a Kondo-like characteristics of the electrical resistivity at low temperatures is analyzed.     

High-temperature redistribution of cation vacancies and irreversible magnetic transitions in the Fe<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>S nanodisks observed by the Mössbauer spectroscopy and magnetic measurements

The hexagonal pyrrhotite Fe_1?x S nanodisks with the NiAs-type structure were synthesized by thermal decomposition of ferrous chloride and thiourea in oleylamine. The Mössbauer spectroscopy and magnetic measurements data indicate that a mixture of antiferromagnetic (AFM) and ferrimagnetic (FRM) phases with the NC (N ≥ 3) and 2C-type superstructures is present in the Fe_1?x S compound at temperatures between 80 K and Néel temperature T _N. At T < 370 K, the AFM phase prevails over the FRM phase. At T > 370 K, a redistribution of iron vacancies takes place, and the vacancy ordering transforms from the NC (N ≥ 3) to 2C-type which essentially increases the magnetization with maximum value at 470 K. Heating the sample above the Néel temperature 565 K leads to a random distribution of vacancies, and this state is quenched upon subsequent cooling of the sample to 300 K. This gives rise to a pure AFM structure with a zero magnetic moment due to a total compensation of the moments in neighboring iron layers. Thus, the high-temperature redistribution of cation vacancies leads to irreversible magnetic transformations in the Fe_1?x S nanoparticles.     

The properties research of ferrum additive on Li [Ni<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>] O<Subscript>2</Subscript> cathode material for lithium ion batteries

Li[Ni_1/3Co_(1-x)/3Mn_1/3Fe _x/3] O₂(x?=?0.0, 0.1, 0.3, 0.5, 0.7, and 0.9) cathode materials have been synthesized via hydroxide co-precipitation method followed by a solid state reaction. Thermogravimetry (TG) and differential thermal analysis (DTA) measurements were utilized to determine the calcination temperature of precursor sample. The crystal structure features were characterized by X-ray diffraction (XRD). The electrochemical properties of Li[Ni_1/3Co_(1-x)/3Mn_1/3Fe _x/3]O₂ were compared by means of cyclic voltammetry (CV), electrochemical impedance spectroscopy(EIS), and galvanostatic charge/discharge test. Electrochemical test results indicate that Li[Ni_1/3Co_0.9/3Mn_1/3Fe_0.1/3] O₂ decrease charge transfer resistance and enhance Li⁺ ion diffusion velocity and thus improve cycling and high-rate capability compared with Li[Ni_1/3Co_1/3Mn_1/3]O₂. The initial discharge specific capacity of Li[Ni_1/3Co_0.9/3Mn_1/3Fe_0.1/3] O₂ was 178.5 mAh/g and capacity retention was 87.11 % after 30 cycles at 0.1C, with the battery showing good cycle performance.     

Magnetic anisotropy of Co/Cu/Co films with indirect exchange coupling

The effect of isothermal annealing on the magnetic anisotropy, bilinear and biquadratic exchange coupling energies, and domain structure of Co/Cu/Co trilayer fiilms with d_Co=6 nm and d_Cu=1.0 and 2.1 nm prepared by magnetron sputtering has been studied. It is shown that, under isothermal annealing, the biquadratic coupling energy decreases by more than an order of magnitude in films with d_Cu=1.0 nm and increases in films with d_Cu=2.1 nm. The fourth-order magnetic anisotropy is shown to be related to the existence of biquadratic exchange energy.     

Spin canting in ferrite nanoparticles

Recently, an easily scalable process for the production of small (3 ?7 nm) monodisperse superparamagnetic ferrite nanoparticles MeFe₂O₄ (Me = Zn, Mn, Co) from iron metal and octanoic acid has been reported (Salih et al., Chem. Mater. 25 1430–1435 2013). Here we present a Mössbauer spectroscopic study of these ferrite nanoparticles in external magnetic fields of up to B = 5 T at liquid helium temperatures. Our analysis shows that all three systems show a comparable inversion degree and the cationic distribution for the tetrahedral A and the octahedral B sites has been determined to (Zn_0.19Fe_0.81) ^A [Zn_0.81Fe_1.19] ^B O₄, (Mn_0.15Fe_0.85) ^A [Mn_0.85Fe_1.15] ^B O₄ and (Co_0.27Fe_0.73) ^A [Co_0.73Fe_1.27] ^B O₄. Spin canting occurs presumably in the B-sites and spin canting angles of 33°, 51° and 59° have been determined for the zinc, the manganese, and the cobalt ferrite nanoparticles.     

Correlation between structural and giant magnetoresistance properties of Fe–Ag nanogranular films

Fe _x Ag_1?x granular thin-films, with the atomic Fe concentration, x, ranging from 0 up to 0.5, were deposited by dc magnetron co-sputtering. The giant magnetoresistance (GMR) intensity is maximum at x _I  = 0.32, while the maximum of GMR efficiency, γ, i.e., the change of GMR intensity for a unit change of reduced squared magnetization, is observed at x _γ = 0.26. Owing to the spin-dependent scattering features, the GMR intensity and γ depend on both the concentration and the arrangement of the magnetic material. Therefore, to explain the difference between x _I and x _γ and to understand how the structural properties affect the magnetoresistive behaviour, we performed magnetization, Mössbauer and X-ray diffraction measurements as a function of x. X-ray data indicate that the granular films exhibit three different regimes: for x < 0.2, they can be described as a Fe–Ag solid solution; for 0.2 < x < 0.32 the Fe–Ag solid solution is still observed and very small Fe precipitates are found; finally, for x > 0.32, a Fe–Ag saturated solid solution is detected, containing bcc Fe clusters whose size is about 10 nm. Differently, for all the concentrations, magnetization data show the presence of Fe precipitates, whose size increases with x, and the Mössbauer investigation confirms this picture. We find that the samples grown at x = x _γ display the finest Fe dispersion within the Ag matrix, as the Fe–Ag solid solution is nearly at saturation and the Fe cluster size is of the order of a few nanometers; this arrangement possibly maximizes the magnetic/non-magnetic interface extension thus enhancing the GMR efficiency. If x is slightly increased, the increase in total Fe content compensates the GMR efficiency reduction, so the GMR intensity maximum is observed.     

Magnetic and structural properties of Fe–Co nanowires fabricated by matrix synthesis in the pores of track membranes

Fe_1-x Co _x nanowires are obtained by electrochemical deposition into the pores of track-etched membranes. The characteristics of the growth process that allow controlling the length and aspect ratio of the nanowires are established. The elemental composition and magnetic properties of the nanowires depend on the diameter of the track-etched pores, which varies from 30 to 200 nm, and the electrochemical potential U (650–850 mV), which determines the nanowire growth rate. According to the results of elemental analysis and the Mössbauer spectroscopy data, the Co content in Fe_1-x Co _x lies in the range of x=0.20?0.25. It is found that the orientation of the magnetic moment of Fe–Co nanoparticles in the wires depends both on the track pore size d and on the nanowire growth rate. Thus, the magnetic moments in nanowires grown in 50-nm-diameter pores are oriented within 0°–40° with respect to the nanowire axis. The magnetic properties of the nanowires are explained in the framework of a theoretical model describing the magnetic dynamics of nanocomposites, which was extended to include the relaxation of the magnetization vector and to take into account interaction between the particles. The key physical parameters important for the technological applications of the nanowires are determined, their dependence on the nanowire growth conditions is traced, and the possibility of controlling them is established.     

Electrospun Dy-doped SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript> nanofibers: microstructure and magnetic properties

SrDy _x Fe_12?x O₁₉ (x ≤ 0.08) nanofibers have been synthesized by the electrospinning method followed by calcinations process. The partial substitution of rare earth ions Dy³⁺ (10.5 μ _B of magnetic moments) mainly occupying 12k sublattice sites in the SrFe₁₂O₁₉ crystal structure is investigated and discussed in this work. An enhanced coercivity of 7155 Oe has been obtained when the doped content reached to 0.08 at a relative low calcination temperature of 800 °C. As a result, we believe the synthesized SrDy _x Fe_12?x O₁₉ nanofibers can potentially be useful in high-density recording media as well as permanent magnets.     

Room Temperature Spin Accumulation Effect in Boron Doped Si Created by Epitaxial Fe<Subscript>3</Subscript>Si/<Emphasis Type="Italic">p</Emphasis>-Si Schottky Contact

To study spin-dependent transport phenomena in Fe₃Si/p-Si structures we fabricated 3-terminal planar microdevices and metal/semiconductor diode using conventional photolithography and wet chemical etching. I?V curve of prepared diode demonstrates rectifying behavior, which indicates the presence of Schottky barrier in Fe₃Si/p-Si interface. Calculated Schottky barrier height is 0.57 eV, which can provide necessary conditions for spin accumulation in p-Si. Indeed, in 3-terminal planar device with Fe₃Si/p-Si Schottky contact Hanle effect was observed. By the analysis of Hanle curves spin lifetime spin diffusion length in p-Si were calculated, which are 145 ps and 405 nm, respectively (at T = 300 K). Spin lifetime strongly depends on temperature which can be related to the fact that spin-dependent transport in our device is realized via the surface states. This gives a perspective of creation of spintronic devices based on metal/semiconductor structure without need for forming tunnel or Schottky tunnel contact.     

Resistive switching effect in metal–oxide–metal structures with ZnO:Li oxide layer

The resistive switching effect in metal–oxide–metal (MOM) structures has been investigated, where the 10% Li-doped ZnO layer was used as an oxide layer, as well as Pt and 20% fluorine doped SnO₂ (SnO₂:F) were used as a bottom electrodes. The current–voltage (I–V) and switching (I–t) characteristics of Ag/ZnO:Li/Pt and Ag/ZnO:Li/SnO₂:F structures were investigated. The unipolar resistive switching is detected in the structures with the Pt, while the use of transparent conductive SnO₂:F electrode instead of Pt, results to the bipolar memory effect.     

The proximity effect in an Fe-Cr-V-Cr-Fe system

The proximity effect was studied in a thin-film Fe-Cr-V-Cr-Fe layered system. As the chromium layer thickness (d_Cr) increases at a fixed thickness of iron layers (d_Fe), the dependence of the superconducting transition temperature (T_c) on d_Cr exhibits a maximum at d_Cr ? 40 Å followed by a sharp decrease. Investigation of the dependence of T_c on d_Fe at a fixed d_Cr showed that the depth of penetration of the Cooper pairs into a chromium layer does not exceed 40 Å. Analysis of the results obtained suggests that, at d_Cr ? 40 Å, chromium layers exhibit the transition from a nonmagnetic state to an incommensurate spin density wave state.     

Finite size and surface effects on the magnetic properties of cobalt ferrite nanoparticles

Cobalt ferrite, CoFe₂O₄, nanoparticles in the size range 2–15 nm have been prepared using a non-aqueous solvothermal method. The magnetic studies indicate a superparamagnetic behavior, showing an increase in the blocking temperatures (ranging from 215 to more than 340 K) with the particle size, D _TEM. Fitting M versus H isotherms to the saturation approach law, the anisotropy constant, K, and the saturation magnetization, M _S, are obtained. For all the samples, it is observed that decreasing the temperature gives rise to an increase in both magnetic properties. These increases are enhanced at low temperatures (below ~160 K) and they are related to surface effects (disordered magnetic moments at the surface). The fit of the saturation magnetization to the T ² law gives larger values of the Bloch constant than expected for the bulk, increasing with decreasing the particle size (larger specific surface area). The saturation magnetization shows a linear dependence with the reciprocal particle size, 1/D _TEM, and a thickness of 3.7 to 5.1 Å was obtained for the non-magnetic or disordered layer at the surface using the dead layer theory. The hysteresis loops show a complex behavior at low temperatures (T ≤ 160 K), observing a large hysteresis at magnetic fields H > ~1000 Oe compared to smaller ones (H ≤ ~1000 Oe). From the temperature dependence of the ac magnetic susceptibility, it can be concluded that the nanoparticles are in magnetic interaction with large values of the interaction parameter T ₀, as deduced by assuming a Vogel–Fulcher dependence of the superparamagnetic relaxation time. Another evidence of the presence of magnetic interactions is the almost nearly constant value below certain temperatures, lower than the blocking temperature T _b, observed in the FC magnetization curves.     

Magnetic ordering in Fe<Subscript>1.087</Subscript>Te under pressure

The crystal and magnetic structures of Fe_1.087Te have been studied by neutron powder diffraction in the temperature range from 1.7 to 80 K at pressures of  ≈0.4 and ≈1.2 GPa. No symmetry change of the tetragonal paramagnetic ambient pressure phase (space group P4/nmm) was observed for temperatures above 60 K and pressures up to  ≈1.2 GPa. A novel pressure-induced phase of Fe_1.087Te having orthorhombic symmetry (space group Pmmn) and incommensurate antiferromagneticbicollinear order was observed in the temperature range from 50 to 60 K at  ≈1.2 GPa. The known monoclinic ambient pressure phase of Fe_1.087Te (space group P2 ₁/n) with commensurate antiferromagnetic order was found to be stable up to at least  ≈1.2 GPa at low temperature.