Hydroformylation of Oct‐1‐ene in Novel Ionic Liquid Crystals

Hydroformylation of oct‐1‐ene leading to nonanal (denoted by n) and 2‐methyloctanal (denoted by iso), in a novel series of caprolactam‐based and common imidazolium‐based ionic liquid crystals (ILCs; see Fig. 1) carried out for the first time (caprolactam=hexahydro‐2H‐azepin‐2‐one) (Scheme). Variation of the chain length (n) of the alkyl substituent (C_n) at the caprolactam cation (CP⁺) from n=12 to 18 caused the n/iso ratios to vary from 1.7 to 2.9. Meanwhile, the TOF (turnover frequency) decreased from 148 to 122 mol mol⁻¹ h⁻¹. Hydroformylation in the imidazolium‐based ILCs revealed that [C₁₆MIm]⋅BF₄ (n/iso 5.2, TOF 969 mol mol⁻¹ h⁻¹) was more favorable than [C₁₆MIm]⋅MsO (n/iso 3.7, TOF 969 mol mol⁻¹ h⁻¹) for the formation of the unbranched aldehyde. Although the n/iso ratio in caprolactam‐based ILCs was lower than that in imidazolium‐based ILCs, the conversions are higher in the former ILCs on the whole. It should be noted that the lamellar mesophase has a strong effect on the regioselectivity and TOF of the hydroformylation. Also, it is evident that the influences of different ILCs on the hydroformylation under the various reaction conditions are greatly different. The identification of the reaction products was established by GC and GC/MS analyses.     

Avoiding gas-phase calculations in theoretical p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> predictions

CBS-QB3, two simplified and less computationally demanding versions of CBS-QB3, DFT-B3LYP, and HF quantum chemistry methods have been used in conjunction with the CPCM continuum solvent model to calculate the free energies of proton exchange reactions in water solution following an isodesmic reaction approach. According to our results, the precision of the predicted pK _a values when compared to experiment is equivalent to that of the thermodynamic cycles that combine gas-phase and solution-phase calculations. However, in the aqueous isodesmic reaction schema, the accuracy of the results is less sensitive to the presence of explicit water molecules and to the global charges of the involved species since the free energies of solvation are not required. In addition, this procedure makes easier the prediction of pK _a values for molecules that undergo large conformational changes in solvation process and makes possible the pK _a prediction of unstable species in gas-phase such as some zwitterionic tautomers. The successive pK _a values of few amino acids corresponding to the ionization of the α-carboxylic acid and α-amine groups, which is one of the problematic cases for thermodynamic cycles, were successfully calculated by employing the aqueous isodesmic reaction yielding mean absolute deviations of 0.22 and 0.19 pK _a units for the first and second ionization processes, respectively.     

Development of an analytical methodology to quantify melamine in milk using micellar liquid chromatography and validation according to EU Regulation 2002/654/EC

Melamine is a toxic triazine, illegally used as an additive in milk to apparently increase the amount of protein. A chromatographic procedure using a C18 column and a micellar mobile phase of sodium dodecyl sulphate (0.05 M) and propanol (7.5%), buffered at pH 3, and a detection set by absorbance at 210 nm, was reported for the resolution and quantification of melamine in liquid and powdered milk samples. In this work, samples were diluted with a SDS solution and were directly injected, thus avoiding long extraction and experimental procedures. Melamine was eluted in nearly 9.3 min without overlapping the protein band or other endogeneous compounds. The optimal mobile phase composition was taken using a chemometrical approach that considers the retention factor, efficiency and peak shape. Validation was performed following the European Commission's indications (European Decision 2002/657/EC), and the main analytical parameters studied were: linearity (0.02-100 ppm; r² = 0.999), limit of detection (5 ppb), intra- and inter-day precision (R.S.D. <7.6% and <9.7%, respectively) and robustness (R.S.D. <7.4% for retention time and <5.0% for area). Sensitivity was adequate to detect melamine under the safety limits proposed by the US FDA. Finally, recoveries for several milk samples were found in the 85-109% range.     

Convex hull of two quadratic or a conic quadratic and a quadratic inequality

Mathematical Programming - In this paper we consider an aggregation technique introduced by Yıldıran (J Math Control Inf 26:417–450, 2009) to study the convex hull of regions...     

EAST快速极紫外光谱仪绝对强度的原位标定

磁约束等离子体中杂质(特别是高Z杂质)的存在将大大增强等离子体辐射功率损失，破坏等离子体的约束性能。杂质行为的定量研究首先要求对杂质测量的光谱诊断系统进行绝对强度标定，获得灵敏度响应曲线。介绍了EAST托卡马克上的快速极紫外光谱仪系统绝对强度的原位标定方法。在波长范围20～150Å内，通过对比极紫外(EUV)波段连续轫致辐射强度的计算值和测量值得到光谱仪的绝对强度标定。在此过程中，首先由(523±1) nm范围内可见连续轫致辐射强度的绝对测量值计算出有效电荷数Z_eff，进而结合电子温度和密度分布计算EUV波段连续轫致辐射强度；EUV波段连续轫致辐射强度的测量值即为不同波长处探测器的连续本底计数扣除背景噪声计数值。对于较长波段范围130～280Å，通过对比等离子体中类锂杂质离子(Fe23+，Cr21+，Ar15+)和类钠杂质离子(Mo31+，Fe15+)发出的共振谱线对(跃迁分别为1s22s 2S_1/2-1s22p 2P_{1/2, 3/2}及2p63s 2S_1/2-2p63p 2P_{1/2, 3/2})强度比的理论和实验值进行相对强度标定。其中共振谱线对强度比的理论值由辐射碰撞模型计算得到，模型中处在各个能级的离子数主要由电子碰撞激发，去激发以及辐射衰变三个过程决定。两种方法相结合，实现了光谱仪20～280Å范围的绝对强度标定。考虑轫致辐射、电子温度及电子密度的测量误差，绝对标定误差约为30%。在绝对标定的基础上，我们对杂质特征谱线强度进行绝对测量，并将测量结果与杂质输运程序结合ADAS(Atomic Data and Analysis Structure)原子数据库计算得到的模拟值进行比较，进而估算等离子体中的杂质浓度。     

Dimerization by Hetero Diels-Alder Reaction of Methyl 4,6-O-Benzylidene-3-Deoxy-3-C-Methylene-α-D-Erythro-Hexopyranosid-2-Ulose

Abstract

The dimerization by hetero Diels-Alder reaction of methyl 4,6-O-benzylidene-3-deoxy-3-C-methylene-α-D-erythro-hexopyranosid-2-ulose was found to be regio and stereospecific. The structure of the cycloadduct was assigned from NMR spectrographic and X-ray crystallographic results. These results indicated that this cycloaddition occurred by a concerted hetero Diels-Alder reaction with inverse electron demand.     

Comparison of two types of vertically aligned ZnO NRs for highly efficient polymer solar cells

Vertically aligned ZnO nanorods (NR) are prepared by two different syntheses methods and applied on polymer solar cells (PSCs). The ZnO electrodes work as the electron transport layer with the P3HT:PCBM blend acting as the active material. Several organic blend solution conditions are optimized: concentration, solvent, and deposition speed. The effect of different NR electrode morphologies is analyzed on the solar cell performance and characterized by current–voltage curves and IPCE analyses. The photovoltaic performance of the solar cells was observed to be influenced by many factors, among them infiltration of the organic P3HT:PCBM blend within the ZnO NR layer. The infiltration of the active layer was monitored by cross section SEM and energy dispersive X-ray spectroscopy analyses. Our results show that higher power conversion efficiencies are achieved when shorter NRs lengths are applied. The best power conversion efficiency obtained was 2.0% for a 400 nm ZnO NR electrode. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Modulating the Photochemistry of Bipyridylic Compounds by Symmetric Substitutions

A quantum electronic study of the effect of substituents on (2,2′‐bipyridyl)‐3,3′‐diol and (2,2′‐bipyridyl)‐3,3′‐diamine is presented. A large difference in the photochemical behavior between the original and the substituted selected systems is expected. For the sake of simplicity, the study is restricted to the symmetrically bi‐substituted compounds: fluorine, the more electronegative atom and thus a strong σ‐acceptor but also a weak π‐donor group, and NO₂, a strong π‐acceptor substituent. Among the large set of compounds studied, two receive special attention: 5,5′‐dinitro‐(2,2′‐bipyridyl)‐3,3′‐diamine and 6,6′‐difluoro‐(2,2′‐bipyridyl)‐3,3′‐diol. While in the former case the nitro substitution transforms (2,2′‐bipyridyl)‐3,3′‐diamine, previously suggested to behave as a photomemory material, into a simple fluorescent species, the latter substitution turns (2,2′‐bipyridyl)‐3,3′‐diol into a fresh new candidate for a photomemory device.