Activation of the metal-organic framework MIL-47 for selective adsorption of xylenes and other difunctionalized aromatics

The capacity and selectivity of the metal-organic framework MIL-47 for liquid phase adsorption are shown to heavily depend on the pretreatment of the material, as illustrated in detail by the particular case of selective xylene adsorption. By totally removing the uncoordinated terephthalic acid from the pores and simultaneously avoiding oxidation to nonporous V(2)O(5), pore volume and uptake of xylenes can be maximized. The presence of uncoordinated terephthalic acid in the pores improves the selectivity between p- and m-xylene. Calcination bed thickness and oven geometry influence the optimal calcination procedure. The physicochemical modifications of MIL-47 during its activation are investigated in detail with XRD, SEM, nitrogen physisorption, TGA and diffuse reflectance UV-Vis spectroscopy. Using optimally pretreated MIL-47 as adsorbent for xylene, ethyltoluene, dichlorobenzene, toluidine or cresol isomers, the para-isomer is in each case preferred over the meta-isomer in pulse chromatographic and batch experiments. The role of stacking in the selective adsorption of these isomers is discussed. In the case of the dichlorobenzenes, the meta- and para-isomers can be separated in a breakthrough experiment with a selectivity of 5.0.     

Pore-filling-dependent selectivity effects in the vapor-phase separation of xylene isomers on the metal-organic framework MIL-47

Vapor-phase adsorption and separation of the C8 alkylaromatic components p-xylene, m-xylene, o-xylene, and ethylbenzene on the metal-organic framework MIL-47 have been studied. Low coverage Henry adsorption constants and adsorption enthalpies were determined using the pulse chromatographic technique at temperatures between 230 and 290 degrees C. The four C8 alkylaromatic components have comparable Henry constants and adsorption enthalpies. Adsorption isotherms of the pure components were determined using the gravimetric technique at 70, 110, and 150 degrees C. The adsorption capacity and steepness of the isotherms differs among the components and are strongly temperature dependent. Breakthrough experiments with several binary mixtures were performed at 70-150 degrees C and varying total hydrocarbon pressure from 0.0004 to 0.05 bar. Separation of the different isomers could be achieved. In general, it was found that the adsorption selectivity increases with increasing partial pressure or degree of pore filling. The separation at a high degree of pore filling in the vapor phase is a result of differences in packing modes of the C8 alkylaromatic components in the pores of MIL-47.     

Length exclusion in the adsorption of chain molecules on chabazite type zeolites

In the adsorption of linear C1-C8 alkanes, alkenes and alcohols on zeolite chabazite, molecules smaller than 6.7 A are adsorbed in significant amounts, whereas longer chains are almost fully excluded from the micropores.     

Experiments with Organic Modifiers in Reversed-Flow MEKC

Reversed-flow MEKC, i.e. MEKC at low pHs to suppress the electroosmotic flow, was evaluated for the separation of some homologous series. At low pHs compared to MEKC, the elution order reverses and normal phase type migration is obtained. Moreover, the elution window is nearly infinite. Efficiencies are very high and reproducibilities in absolute migration times are acceptable (%RSD < 5). The influence of a series of alcohol modifiers was investigated.     

Comparison of two mass-selective detectors with special reference to the analysis of residues of anabolics

In the analysis of residues of anabolic agents the use of combined techniques, especially gas chromatography-mass spectrometry, is of increasing interest. When this method is used for the analysis of residues of anabolics it is very important to have a knowledge of the characteristics of the different types of apparatus on the market and to be sure that the results are not "apparatus-dependent". In this study two mass-selective detectors, the Hewlett-Packard 5970 and the ion trap detector 800, were compared by injecting the same samples of derivatized anabolics (standard solutions) into the two systems.     

Automated capillary gas chromatographic system to monitor ethylene emitted from biological materials

An automated capillary gas chromatographic system to measure ethylene emitted from biological materials is presented. The system consists of an on-line sampling device, a thermodesorption preconcentration apparatus and a capillary gas chromatograph with a flame ionization detection system. The limit of detection achievable on the GC system alone is 5 pg ethylene. The use of the strong Carboxen 1000 adsorbent at a sampling temperature as low as -50 degrees C allows sampling of volumes up to a few liters. Ethylene concentrations at low ppt levels can be accurately and reproducibly determined.     

Surfaces in $${\mathbb{S}^2\times\mathbb{R}}$$ with a canonical principal direction

We show a way to choose nice coordinates on a surface in and use this to study minimal surfaces. We show that only open parts of cylinders over a geodesic in are both minimal and flat. We also show that the condition that the projection of the direction tangent to onto the tangent space of the surface is a principal direction, is equivalent to the condition that the surface is normally flat in . We present classification theorems under the extra assumption of minimality or flatness. J. Fastenakels is a research assistant of the Research Foundation—Flanders (FWO). J. Van der Veken is a postdoctoral researcher supported by the Research Foundation—Flanders (FWO). This work was partially supported by project G.0432.07 of the Research Foundation—Flanders (FWO).     

On-line analysis of complex hydrocarbon mixtures using comprehensive two-dimensional gas chromatography

This paper discusses the first setup for on-line qualitative and quantitative comprehensive two-dimensional gas chromatography (GC × GC) of complex hydrocarbon mixtures. A built-in 4-port 2-way valve allows switching between flame ionization detection (FID) and time-of-flight mass spectrometry (TOF-MS) between runs, without the need to cool down and vent the MS. Proper selection of GC carrier gas flow rates enables maximal agreement between the obtained chromatograms in both configurations. For on-line analysis of reactor effluents, a dedicated sampling system allows automatic sampling of the hot reactor effluent gases and immediate injection of the sample on the GC × GC. To determine a complete effluent composition in a single run of the GC × GC, a subzero oven starting temperature was employed. Modulation is started when the oven temperature reaches 40 °C, thus dividing the chromatogram in a conventional 1D and a comprehensive 2D part. This work illustrates the mature and robust character of GC × GC, extending its capabilities from mere laboratory use to on-line routine analysis for industrial processes in the (petro-)chemical industry.