A study for the selection of NPE-free cocktails for LSC routine measurements

Journal of Radioanalytical and Nuclear Chemistry - In this paper a study for the selection of an NPE (nonylphenol ethoxylates)—free cocktail is discussed in order to be used for our routine...     

Implementation of an integrated glucose POCT system

In response to a change of the Belgian National Directives whereby hospital laboratories became responsible for all point-of-care testing (POCT) performed within hospital walls a standardized and automated POC glucose-testing system was implemented in our hospital. The system consists of 50 AccuCheck Inform instruments (Roche Diagnostics, Vilvoorde, Belgium), 50 docking stations, a DataCare Server, and connections to the medical laboratory information system (MOLIS, Sysmex, Barchon, Belgium) and to the hospital information system. Implementation involved many parties and extensive preparation and communication. Key issues were bar-coded patient and user identification, training, and responsibilities. One year after the hospital wide implementation of this system the quality of POC glucose testing has significantly increased, thereby improving patient safety. This study describes a stepwise change over involving the medical laboratory and with a focus on hands-on quality.Presented at the ninth conference on Quality in the Spotlight, 18–19 March 2004, Antwerp, Belgium.     

Determination of betamethasone and triamcinolone acetonide by GC-NCI-MS in excreta of treated animals and development of a fast oxidation procedure for derivatisation of corticosteroids.

The use of corticosteroids in combination with other hormonal substances has long been known to result in increased mass gain with bovines. Practice has demonstrated, however, that even the single use of a glucocorticoid may result in growth promoting effects. In addition to the popular dexamethasone, more recently other corticosteroids have also been misused for fattening purposes. The first part of this study deals with the detection of two of them, namely betamethasone and triamcinolone acetonide. Betamethasone was administered orally to a cow at a dose of 50 mg d-1 for 5 d, then later the same cow was injected intramuscularly with a dose of 50 mg of betamethasone dipropionate. Excretion in urine and faeces was followed with both HPLC-enzyme immunoassay and a previously described method based on negative chemical ionization mass spectrometry (NCI-MS) after oxidation. For the triamcinolone acetonide study a cow was treated with 50 mg d-1 of the drug during a 7 d period. Excretion in faeces was followed with GC-NCI-MS. As triamcinolone acetonide is resistant to the previously described oxidation procedure, however, a hydrolysis step had to be introduced prior to oxidation. In addition to this specific modification necessary for triamcinolone acetonide, in a subsequent part of this study the original oxidation procedure with pyridinium chlorochromate was re-investigated especially to shorten the procedure. With the introduction of potassium dichromate the reaction time could be decreased from 3 h to 10 min.     

Differentiation between dexamethasone and betamethasone in a mixture using multiple mass spectrometry

Direct gas chromatographic methods to analyse phenylurea pesticides are discouraged by the thermal instability of these compounds, that in conventional hot splitless inlet systems leads to extensive and irreproducible formation of isocyanates and amines. However a careful control of the operating conditions, like the inlet temperature, the pressure and the presence of suitable chemical additives (as acetic acid, low-molecular-mass amines, organic anhydrides) can either: (i) minimise the thermal decomposition enabling the direct GC-MS analysis of phenylureas, or (ii) lead to reproducible conversion to isocyanates. Experimental design was employed to study the effect of the experimental variables on the thermal transformation of phenylurea pesticides in splitless inlet system. Two strategies were alternatively optimised: (i) the minimisation of degradation reactions to increase the signal of phenylureas; (ii) the maximisation of the degradation to isocyanates that are in turn determined. The maximal yields in isocyanate were obtained with high inlet temperatures, low carrier flows in the injection phase and the presence of acetic anhydride. By contrast, the use of relatively low inlet temperatures, high carrier flows during the injection and the presence of an amine maximise the response of the parent compounds.     

ToF-S-SIMS molecular 3D analysis of micro-objects as an alternative to ion beam erosion at large depth: application to single inkjet dots

Molecular depth profiling is needed to develop high-tech materials optimised to the μm or even up to the nm scale. Recent progress in time-of-flight static secondary ion mass spectrometry (ToF-S-SIMS) offers perspectives to molecular depth profiling. However, at this moment, the methodology is not yet capable to deal with a range of materials science applications because of the limited depth range, the loss of intensity in the subsurface and the loss of depth resolution at large distances from the original surface. Therefore, the purpose of this paper is to develop a complementary approach for the molecular 3D analysis at large depth, using a combination of ultra-low angle microtomy (ULAM) and surface analysis of the sectioned material with ToF-S-SIMS. Single inkjet dots with a diameter of 100 μm and height of 22 μm on a PET substrate have been used as a test system for the methodology. It is demonstrated that the use of a diamond knife allows the molecular composition and distribution of components within the microscopic feature to be probed with a lateral resolution of 300 nm. Hence the methodology approaches the physical limit for ion imaging of organic components with local concentrations in the % range. In practice, the achievable depth resolution with ULAM-S-SIMS is ultimately limited by the surface roughness of the section. Careful optimisation of the ULAM step has resulted in a surface roughness within 6 nm (R _a value) at a depth of 21 μm. This offers perspective to achieve 3D analysis with a depth resolution as good as 18 nm at such a large distance from the surface. Furthermore, the ULAM-S-SIMS approach is applicable to materials unamenable to ion beam erosion. However, the method is limited to dealing with, for instance, Si or glass substrates that cannot be sectioned with a microtomy knife. Furthermore, sufficient adhesion between stacked layers or between the coating and substrate is required. However, it is found that the approach is applicable to a wide variety of industrially important (multi)layers of polymers on a polymer substrate.     

Parallel and totally geodesic hypersurfaces of non-reductive homogeneous four-manifolds

We classify totally geodesic and parallel hypersurfaces of four-dimensional non-reductive homogeneous pseudo-Riemannian manifolds.     

Unusual chain length dependent adsorption of linear and branched alkanes on UiO-66

In this work, the zero coverage adsorption properties of C₅–C₁₀ n- and iso-alkanes on the UiO-66, UiO-66-Me and UiO-66-NO₂ metal–organic frameworks are studied by gas phase pulse chromatography. Analysis of enthalpy values, entropy values, Gibbs free energies and Henry constants reveals unusual chain length dependent adsorption behaviour of linear and branched alkanes, caused by the complex structure of the zirconium metal–organic framework UiO-66. The UiO-66 structure consists of a small, tetrahedral and large, octahedral cage. It is shown that at specific carbon chain lengths (e.g. C₆–C₇ for n-alkanes), distinctive jumps in adsorption enthalpy, entropy values and Henry constants occur. This chain length dependent effect is even more pronounced for 2- and 3-methyl alkanes and double branched alkanes. This distinctive shift in adsorption behaviour occurs at a molecular size that coincides with the cavity dimensions of the smallest, tetrahedral cage. The resulting selective adsorption arises from confinement effects and is function of both the molecular shape and size.     

Higher Order Parallel Surfaces in Bianchi–Cartan–Vranceanu Spaces

We give a full classification of higher order parallel surfaces in three-dimensional homogeneous spaces with four-dimensional isometry group, i.e., in the so-called Bianchi–Cartan–Vranceanu family. This gives a positive answer to a conjecture formulated in [2]. As a partial result, we prove that totally umbilical surfaces only exist if the ambient Bianchi–Cartan–Vranceanu space is a Riemannian product of a surface of constant Gaussian curvature and the real line, and we give a local parametrization of all totally umbilical surfaces. Received: December 20, 2006. Revised: March 15, 2007.     

Sequences of harmonic maps in the 3‐sphere

We define two transforms of non‐conformal harmonic maps from a surface into the 3‐sphere. With these transforms one can construct, from one such harmonic map, a sequence of harmonic maps. We show that there is a correspondence between harmonic maps into the 3‐sphere, H‐surfaces in Euclidean 3‐space and almost complex surfaces in the nearly Kähler manifold . As a consequence we can construct sequences of H‐surfaces and almost complex surfaces.     

Experimental investigation of the difference in B-term dominated band broadening between fully porous and porous-shell particles for liquid chromatography using the Effective Medium Theory

The difference in B-term diffusion between fully porous and porous-shell particles is investigated using the physically sound diffusion equations originating from the Effective Medium Theory (EMT). Experimental data of the B-term diffusion obtained via peak parking measurements on six different commercial particle types have been analyzed (3 porous and 3 non porous). All particles were investigated using the same experimental design and test analytes, over a very broad range of retention factor values. First, the B-term reducing effect of the solid core (inducing an additional obstruction compared to fully porous particles) has been quantified using the Hashin-Shtrikman expression, showing that the presence of a solid core can account for a reduction of about 11% when the core diameter makes up 63% of the total particle diameter (Halo and Poroshell-particles) and a reduction of 16% when the core diameter makes up 73% (Kinetex). Remaining differences can be attributed to differences in the microscopic structure of the meso-porous material (meso-pore diameter, internal porosity or relative void volume). The much lower B-term diffusion of Halo and Kinetex particles compared to the fully porous Acquity particles (some 20-40% difference, of which about 10-15% can be attributed to the presence of the solid core) can hence largely be attributed to the much smaller internal porosity and the smaller pore size of the meso-porous material making up the shell of these particles.