LNG尾气中提取氦气的流程分析

LNG产业的蓬勃发展为资源利用开发了新的途径。基于液化天然气尾气的特点,文中提出了一种与液化天然气产业联产氦气的新方法,设计了相应的工艺流程。通过对尾气进行增压脱酸、冷凝分离、加氧脱氢、内纯化除杂等多种处理,可对天然气尾气中的氦进行有效提取分离,最终达到纯氦的技术指标。该方法有望使国内不具备工业提取价值的氦资源重新得到利用,在国内建立一种新型的氦供应途径。     

基于光纤传感的化学需氧量全光谱检测系统

为了快速准确地检测地表水、污水的化学需氧量(COD),设计了一种十字通透式结构光纤传感器,建立了一种水质COD全光谱检测系统。基于该系统,建立了COD与光谱吸光度的相关性数学模型。对配置的检测水样进行了测量,并比较哈希DR 6000多参数水质检测仪对相同水样测量得到的数据,可以发现,所构建的系统与哈希DR 6000多参数水质检测仪测量COD的示值误差小于3%,能较好的适用于水质COD实时在线检测。     

单色光束的衍射度

受近期Gawhary和Severini在Opt.Lett.33,1360(2008)一文中引入的光束近轴度的启发,定义了一个独立于光束近轴度的衍射度参数来描述单色光束的衍射扩散程度,所定义的衍射度只依赖于光束的角谱分布,并可以定量比较不同光束的衍射扩散程度.     

Back contact–absorber interface modification by inserting carbon intermediate layer and conversion efficiency improvement in Cu2ZnSn(S,Se)4 solar cell

Carbon layers have been employed as intermediate layers between Mo back contact and Cu₂ZnSn(S_1–xSe_x)₄(CZTSSe) absorber film prepared by sol–gel and post‐selenization method. Carbon layers with appropriate thickness can significantly inhibit the formation of MoSe₂ and voids at bottom region of the absorber, and therefore reduce the series resistance remarkably. The conversion efficiency can be boosted by the introducing of the carbon layer from 6.20% to 7.24% by enhancement in short current density, fill factor and open voltage in comparison to the reference sample without carbon layer. However, excess thickness of carbon layer will worse device performance due to the deteriorated absorber crystallinity. In addition, the time‐resolved photoluminescence analysis shows that inserting the carbon layer with suitable thickness does not introduce recombination and lower minority lifetime. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Toxic effects of anticancer drug doxorubicin to bovine serum albumin evaluated by spectroscopic methods

The aim of this present work is to investigate the interaction between doxorubicin and bovine serum albumin (BSA) in simulated physiological conditions by spectroscopic methods to reveal potential toxic effects of the drug. The results reflected that doxorubicin made the fluorescence quenching of BSA through a static quenching procedure. The binding constants at 293, 298, and 303 K were obtained as 2.53 × 10⁵, 8.13 × 10⁴, and 3.59 × 10⁴ M^–1, respectively. There may be one binding site of doxorubicin on BSA. The thermodynamic parameters indicated that the interaction between doxorubicin and BSA was driven mainly by hydrogen bonding and electrostatic forces. Synchronous fluorescence spectra and circular dichroism (CD) results showed doxorubicin binding slightly changed the conformation of BSA with secondary structural content changes. Förster resonance energy transfer (FRET) study revealed high possibility of energy transfer with doxorubicin-Trp-212 distance of 3.48 nm. The results of the present study may provide valuable information for studying the distribution, toxicological and pharmacological mechanisms of doxorubicin in vivo.     

主被动光学图像融合技术研究

本文应用扫描式激光成像雷达获取试验数据并实现对激光数据的三维成像处理,给出了基于目标特征的激光雷达图像与被动光学图像的数据融合方法,实现了激光图像和光学图像间的三维融合。试验结果表明,本文所提出的基于目标特征的两种不同质图像间的融合方法是可行的,融合后的图像具有丰富的光谱信息和三维立体信息。     

Thermal stability of amorphous SiOC/crystalline Fe composite

We examined the thermal stability of amorphous silicon oxycarbide (SiOC) and crystalline Fe composite by in situ and ex situ annealing. The Fe/SiOC multilayer thin films were grown via magnetron sputtering with controlled length scales on a surface-oxidized Si (100) substrate. These Fe/SiOC multilayers were in situ or ex situ annealed at temperature of 600 °C or lower. The thin multilayer sample (~10 nm) was observed to have a layer breakdown after 600 °C annealing. Diffusion starts from low groove angle triple junctions in Fe layers. In contrast, the thick multilayer structure (~70 nm) was found to be stable and an intermixed layer (Fe_xSi_yO_z) was observed after 600 °C annealing. The thickness of the intermixed layer does not vary as annealing time goes up. The results suggest that the Fe_xSi_yO_z layer can impede further Fe, Si and O diffusion, and assists in maintaining morphological stability.     

Optical heterodyne Herriott-type multipass laser absorption spectrometer

We present a Herriott-type multipass laser absorption spectrometer enhanced by optical heterodyne detection. The proposal is demonstrated by measuring the spectra of water vapor molecule in the region from 12247.6873 to 12249.6954 cm-1. Compared with direct absorption spectroscopy, the signal-to-noise ratio is improved nearly one magnitude of factor by combining with the optical heterodyne spectroscopy and extra weak absorption lines are observed. The minimum detectable absorption is estimated at 4.36×10-8 cm-1 and the measured line shape dominated by Doppler broadening can be precisely recovered by direct transformation of experimental optical heterodyne spectral profile.     

Theoretical analysis of the mode coupling induced by heat of large-pitch micro-structured fibers

In this paper,a theoretical model to analyze the mode coupling induced by heat,when the fiber amplifier works at high power configuration,is proposed.The model mainly takes into consideration the mode field change due to the thermally induced refractive index change and the coupling between modes.A method to predict the largest average output power of fiber is also proposed according to the mode coupling theory.The largest average output power of a large pitch fiber with a core diameter of 190 μm and an available pulse energy of 100 mJ is predicted to be 540 W,which is the highest in large mode field fibers.