Isolation of ethanol from its aqueous solution by liquid phase adsorption and gas phase desorption using molecular sieving carbon

A novel bioethanol separation process was proposed in this study employing molecular sieving carbon (MSC) as an adsorbent, whose pore diameter is close to molecular size of ethanol. In the proposed process, fermentation broth is first introduced to the adsorption bed packed with MSC. In this step, ethanol is selectively adsorbed onto MSC, with highly enriching ethanol in the micropore of MSC. Subsequently, the concentrated ethanol is desorbed from MSC to gaseous phase, resulting in further purification of ethanol owing to a considerable difference in desorption rate between water and ethanol; Because of molecular sieving effect of MSC, the desorption rate of ethanol is much smaller than that of water. To establish this process, adsorption equilibrium and kinetics of ethanol on various MSCs were investigated in aqueous phase as the first step. Also, desorption kinetics of ethanol and water in gaseous phase were investigated. As a result, it was suggested that highly concentrated ethanol could be obtained with high recovery ratio through these simple operations, meaning the proposed process is quite promising.     

吲哚-2-甲酸和(S)-吲哚啉-2-甲酸的合成和相互转化研究进展

吲哚-2-甲酸和(S)-吲哚啉-2-甲酸均是具有生物活性的天然产物和众多降压药的特征结构片段,报道了它们的合成及其相互转化研究进展.吲哚啉-2-甲酸可由吲哚-2-甲酸还原制得,其中(S)-吲哚啉-2-甲酸可由外消旋体拆分或通过不对称合成法制备,其中"手性源法"作为一种新出现的方法具有较好的前景.吲哚-2-甲酸可由Fischer吲哚合成法制备,或通过取代苯胺或苯甲醛制备,也可通过吲哚啉衍生物氧化脱氢制备,其中Fischer合成法仍具有较强的竞争力.     

Quantum-sized gold nanoclusters: bridging the gap between organometallics and nanocrystals

This Concept article provides an elementary discussion of a special class of large‐sized gold compounds, so‐called Au nanoclusters, which lies in between traditional organogold compounds (e.g., few‐atom complexes, <1 nm) and face‐centered cubic (fcc) crystalline Au nanoparticles (typically >2 nm). The discussion is focused on the relationship between them, including the evolution from the Au???Au aurophilic interaction in Au^I complexes to the direct Au? Au bond in clusters, and the structural transformation from the fcc structure in nanocrystals to non‐fcc structures in nanoclusters. Thiolate‐protected Au_n(SR)_m nanoclusters are used as a paradigm system. Research on such nanoclusters has achieved considerable advances in recent years and is expected to flourish in the near future, which will bring about exciting progress in both fundamental scientific research and technological applications of nanoclusters of gold and other metals.     

Crystal facet dependence of water oxidation on BiVO4 sheets under visible light irradiation

Monoclinic BiVO(4) crystals with preferentially exposed (040) facets were hydrothermally synthesized by using a trace amount of TiCl(3) as the directing agent; this function was confirmed by X-ray diffraction patterns (XRD) and high-resolution transmission electron microscopy (HRTEM). The effects of the directing agent TiCl(3) and the pH values applied during synthesis have been studied, and the optimized BiVO(4) sample with highly exposed (040) facet could be obtained by using 1.2 at.% of TiCl(3) as the directing agent at a pH value of 2. Some complementary techniques were also applied to exclude the effects of the structural and physical property changes, such as surface area and hydrophilicity. The photocatalytic activity of oxygen evolution on BiVO(4) is found to be proportionally correlated with the exposed surfaces of the (040) facet. It is assumed that the active sites with a BiV(4) structure on the exposed (040) facet is assigned to be responsible for the high activity of O(2) evolution.     

Controlling the duality of the mechanism in liquid-phase oxidation of benzyl alcohol catalysed by supported Au-Pd nanoparticles

In the solvent-free oxidation of benzyl alcohol to benzaldehyde using supported gold-palladium nanoparticles as catalysts, two pathways have been identified as the sources of the principal product, benzaldehyde. One is the direct catalytic oxidation of benzyl alcohol to benzaldehyde by O(2), whereas the second is the disproportionation of two molecules of benzyl alcohol to give equal amounts of benzaldehyde and toluene. Herein we report that by changing the metal oxide used to support the metal-nanoparticles catalyst from titania or niobium oxide to magnesium oxide or zinc oxide, it is possible to switch off the disproportionation reaction and thereby completely stop the toluene formation. It has been observed that the presence of O(2) increases the turnover number of this disproportionation reaction as compared to reactions in a helium atmosphere, implying that there are two catalytic pathways leading to toluene.     

Luminescent organic 1D nanomaterials based on bis(β-diketone)carbazole derivatives

A series of new triphenylamine-functionalized bis(β-diketone)s bridged by a carbazole (CnBDKC, n=1, 4, 8, 16) with twisted intramolecular charge-transfer emission in polar solvents has been synthesized. The length of the carbon chains has a significant effect on the self-assembling properties of the compounds. Well-defined 1D nanowires were easily generated from C1BDKC with a methyl group by a reprecipitation approach directed by π-stacking interaction, and the molecules packed into J-aggregates in the nanowires. In addition, 1D nanofibers based on C16BDKC bearing a long hexadecyl chain were prepared through the organogelation process, and H-aggregates were formed driven by the synergistic effect of π-stacking interaction and van der Waals force in the gel phase. C4BDKC and C8BDKC containing butyl and octyl side chains, respectively, cannot arrange into dispersed nanostructures, probably because π-π interaction between conjugated moieties might be disturbed by the interaction between the side chains, which is, however, not strong enough to dominate the self-assembling process. Notably, the nanowires based on C1BDKC and the gel nanofibers from C16BDKC can emit strong green light under irradiation, which suggests that these 1D nanomaterials may have potential applications in emitting materials as well as photonic devices.     

pH响应性表面对蛋白质吸附的调控

通过表面引发原子转移自由基聚合在固定了引发剂的硅表面接枝了聚甲基丙烯酸叔丁酯(PtBMA),而后通过水解得到聚甲基丙烯酸(PMAA)聚合物刷.通过X射线光电子能谱、椭圆偏振仪和水接触角测试证明了接枝改性的成功.研究发现PMAA改性表面的浸润性和对蛋白质的吸附行为都具有一定的pH响应性.在较低pH值时改性表面相对疏水,随...     

Improved accuracy for Raman spectroscopic determination of polyethylene property by optimization of measurement temperature and elucidation of its origin by multiple perturbation two-dimensional correlation spectroscopy

A novel strategy is demonstrated to improve the accuracy for determination of polyethylene (PE) density using Raman spectroscopy by optimizing the temperature of sample measurement. Spectral features associated with the conformation change of the polymer induced by temperature may provide valuable information to quantify important polymer properties such as density. To evaluate possible existence of an optimal temperature providing improved quantitative accuracy, Raman spectra of PE pellets with different densities were collected at eight different temperatures from 30 to 100 °C at 10 °C intervals. Using the spectral datasets collected at each temperature, partial least squares (PLS) models were developed using the reference PE density values determined by a standard density gradient method at 23 °C. Interestingly, the most accurate determination of density was realized at 70 °C. Multiple perturbation two-dimensional (MP2D) correlation analysis and differential scanning calorimetry (DSC) were used to examine the origin of improved accuracy at 70 °C. From these analyses, the pre-melt behavior of the PE samples was identified below their melting temperatures. Structural variations induced at the pre-melt stages enhance Raman spectral selectivity among the samples, thereby providing more accurate determination of PE density. The MP2D correlation analysis revealed the unforeseen thermal behavior of PE samples and successfully explained the improved accuracy at 70 °C.     

Nitrate enhanced electrochemiluminescence determination of tris(2,3-dibromopropyl) isocyanurate with a gold nanoparticles-modified gold electrode

Tris(2,3-dibromopropyl) isocyanurate (TBC) is a heterocyclic hexabrominated flame retardant, which cannot be degraded even over a long time and may be a potential environmental pollutant. In this paper, TBC is for the first time as far as we know determined by silver nitrate-enhanced electrochemiluminescence (ECL) using a gold nanoparticles (AuNPs)-modified gold electrode. In our experiments, TBC was found to have the characteristics of increasing the ECL intensity of Ru(bpy)(3)(2+), and the ECL signal was proportional to the concentration of TBC. Based on this, we have successfully developed a novel, fast and sensitive method for the analysis of TBC. The main influencing factors including the volume ratio of acetonitrile and water, and the concentration of Ru(bpy)(3)(2+) were investigated in detail. Compared with using a bare gold electrode in MeCN without AgNO(3), the limit of detection is remarkably lowered by 20 times and the linear range is expanded by 5 times by using the AuNPs-modified gold electrode and AgNO(3). Under the optimal conditions, a limit of detection of 5.0 × 10(-8) M (S/N = 3) is achieved with a linear range of 1.0 × 10(-7) to 5.0 × 10(-5) M. The mechanism of the ECL enhancement of the system is also investigated.