Separation, identification, and interaction of heparin oligosaccharides with granulocyte-colony stimulating factor using capillary electrophoresis and mass spectrometry

A capillary electrophoresis (CE) method was developed for the separation of heparin oligosaccharides compatible to study the interactions between the oligosaccharides and granulocyte-colony stimulating factor (G-CSF). Unfractionated heparin was eliminitively degraded to heparin oligosaccharides by an endolytic heparinase. The degraded smaller oligosaccharides (M(r) < 1000) were baseline-separated by CE under a 50 mM phosphate buffer (pH 9.0) in 10 min. Standard heparin disaccharides and larger oligosaccharides (1000 < M(r) < 8000) were all separated under optimized separation conditions. Compared with standard heparin disaccharides, smaller oligosaccharides contained one nonsulfated, two monosulfated, and two disulfated disaccharides, but trisulfated disaccharides were not found. The smaller oligosaccharides were also identified and molecular mass was deduced by electrospray ionization-mass spectrometry (ESI-MS). Furthermore, interactions between G-CSF and the oligosaccharides were studied by using capillary zone electrophoresis (CZE) under the above separation conditions. It was found that larger oligosaccharides could interact with G-CSF while smaller oligosaccharides were not observed to bind to G-CSF under the experimental conditions. In conclusion, the purified heparinase could selectively degrade heparin into oligosaccharides and the interaction between G-CSF and heparin was correlated with the chain length of heparin.     

气相色谱-质谱联用测定苯乙烯中的阻聚剂对叔丁基邻苯二酚

 建立了气相 质谱联用 (GC/MS)测定苯乙烯中阻聚剂对叔丁基邻苯二酚含量的方法。苯乙烯样品直接进样 ,通过毛细管柱 (HP 1,30m× 0 32mmi.d .× 0 2 5 μm)分离 ,由电子轰击 (EI)源于选择离子监测 (SIM)模式下进行检测。结果表明 ,对叔丁基邻苯二酚含量在 5mg/kg～ 5 0mg/kg时线性关系良好 (r2 =0 9987) ,回收率高 ;与美国材料测试标准ASTMD4 5 90中的分光光度测量法比较具有操作简捷、准确度高的特点。     

Correction: Direct synthesis of the organic and Ge free Al containing BOG zeolite (ITQ-47) and its application for transformation of biomass derived molecules

Aluminosilicate boggsite (Si/Al-BOG) has been hydrothermally synthesized without adding organic structure-directing agents (OSDAs) in the synthesis gel using the borosilicogermanium ITQ-47 (Si/B-ITQ-47) zeolite as seeds. The introduction of the costly and environmentally less benign phosphazene organic structure-directing agent is not required to grow the zeolite. Physicochemical characterization experiments show that Si/Al-BOG has good crystallinity, high surface area, tetrahedral Al³⁺ species, and acid sites. In order to test the catalytic performance of the zeolite, the synthesis of l,l-lactide from l-lactic acid was performed. Si/Al-BOG exhibits 88.2% conversion of l-lactic acid and 83.8% l,l-lactide selectivity, which are better than those of other zeolites studied up to now.

Aluminosilicate boggsite (Si/Al-BOG) has been hydrothermally synthesized without adding organic structure-directing agents (OSDAs) in the synthesis gel using the borosilicogermanium ITQ-47 (Si/B-ITQ-47) zeolite as seeds.     

Syntheses, Structures and Coordination Behavior of Central Hydroxyl Group Containing Polydentate Ligands

Proteins containing dinuclear Cu (II), Zn (II) centers play paramount roles in biology1. As mimetic of metal-dependent esterase, dinuclear Cu (II) and Zn (II) complexes have received a great deal of attentions2~6. They are of interest in the field of biomimetic chemistry to provide an improved understanding of the function of the biological sites and as potential catalysts for substrate oxidations. Schiff base type polydentate ligands which contain centeral hydroxyl group have been wid…     

THE ADSORPTION OF OXYGEN OVER ThO_2-BaF_2 CATALYST

IntroductionInthcsclcctivcoxidationofalkanes.suchas'theoxidativccouplingofmcthanc(0CM)andthcoxidativcdch}'drogenationofcthanc(0DE)t0prcparccth}'lene.bothoxidcionsofthelatticeandtheox}'genspeciesovercataIystsuffocepla}'animportantrole.Althoughcxtcnsivcinvcstigationshavcbeengivcntothecharactcrizationofox}'gcnspccicsandthcreactionofox}'gcnspecicsx`ithalkanes,itisstilldifficulttosayt`hichoncsofox}'gcnspcciesarcthcactivcspecicsinthcactivation0falkancs.bccauscthenaturcofcatal}'stsandthecxperimcntc…     

实验室质量体系运行的关键控制点分析

通过对十几年来实验室计量认证的经验总结,对县级实验室质量体系运行情况进行了分析。指出了质量体系运行的关键控制点、存在的问题、解决问题的方法。经分析认为,基层实验室的生存和发展必然趋势是提高自身的检测能力。     

增容剂对聚丙烯/粘土纳米复合材料热分解动力学的影响

采用三单体固相接枝聚丙烯作为增容剂制备了聚丙烯粘土纳米复合材料.通过XRD和TEM表征了其纳米结构.利用动态TGA方法研究了聚丙烯和纳米复合材料的热稳定性.分别采用Flynn Wall Ozawa和Kissinger法研究了聚丙烯及其纳米复合材料的热分解动力学.结果都表明,蒙脱土的加入明显提高了聚丙烯的起始热分解温度,纳米复合材料热失重10%时的温度比聚丙烯提高40K左右;纳米复合材料的热分解温度区间明显比聚丙烯的窄;纳米复合材料热分解表观活化能明显增大,与聚丙烯相比提高50%以上.     

Coarse-grained rigid blob model for soft matter simulations

We have developed a coarse-grained multiscale molecular simulation method for soft matter systems that directly incorporates stereochemical information. We divide the material into disjoint groups of atoms or particles that move as separate rigid bodies; we call these groups "rigid blobs," hence the name coarse-grained rigid blob model. The method is enabled by the construction of transferable interblob potentials that approximate the net intermolecular interactions, as obtained from ab initio electronic structure calculations, other all-atom empirical potentials, experimental data, or any combination of the above. We utilize a multipolar expansion to obtain the interblob potential-energy functions. The series, which contains controllable approximations that allow us to estimate the errors, approaches the original intermolecular potential as the number of terms increases. Using a novel numerical algorithm, we can calculate the interblob potentials very efficiently in terms of a few interaction moment tensors. This reduces the labor well beyond what is required in standard molecular-dynamics calculations and allows large-scale simulations for temporal scales commensurate with characteristic times of nano- and mesoscale systems. A detailed derivation of the formulas is presented, followed by illustrative applications to several systems showing that the method can effectively capture realistic microscopic details and can easily extend to large-scale simulations.     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.     

The solubility products of some slightly soluble lead salts and the potentiometric titration of molybdate, tungstate, perrhenate and fluoride with use of a lead ion-selective electrode

The conditional solubility products of lead molybdate, lead tungstate and lead perrhenate were found to be 1.2 +/- 0.3 x 10(-13), 8.4 +/- 0.1 x 10(-11) and 6.9 +/- 0.8 x 10(-9), respectively. In the case of lead perrhenate, the conditional stepwise formation constants for PbReO(+)(4) and Pb(ReO(4))(2) were found to be 1.2 +/- 0.1 x 10(5) and 1.2 +/- 0.2 x 10(3), respectively. Conditions for the potentiometric titration of molybdate, tungstate, perrhenate and fluoride with lead were established. The precipitates obtained during the titration of molybdate, perrhenate and fluoride mixtures have been proved to be physical mixtures of lead molybdate, perrhenate, fluoride and hydroxide, by infrared spectrometry. The pK(sp)-values of the lead salts of chromate, molybdate and tungstate are shown to increase linearly with increasing atomic number or electronegativity of the Group VI metal ion.