厚度对非极性聚合物薄膜驻极体电荷储存及电荷动态特性的影响

以Du Pont公司的商用Teflon FEP A型薄膜为例，通过热脉冲技术、等温表面电位衰减测量和开路热刺激放电电流谱分析等实验结果，讨论了经常温和高温电晕充电后样品厚度对薄膜驻极体的沉积电荷密度、薄膜驻极体的内电场、体电导率以及电荷储存稳定性的影响.通过热脉冲技术组合电导率温度曲线的测量，研究了在不同温度条件下样品厚度对沉积电荷层的平均电荷重心移动的影响.结果表明：在充电参数一定的条件下，随着膜厚的降低，储存电荷密度上升，但电荷稳定性有所下降.因此，合理地调控薄膜厚度，可以有效地优化驻极体的电荷储存能 关键词： 厚度 驻极体 电荷储存能力 电荷稳定性     

恒流电晕充电对聚四氟乙烯多孔薄膜驻极体驻极态的影响

利用常温下恒流和恒压电晕充电、充电后的等温表面电位衰减、热刺激放电和扫描电镜等实 验手段研究了恒流和恒压电晕充电技术对聚四氟乙烯多孔薄膜驻极体驻极态的影响.与恒压电晕充电相比较，恒流电晕充电时由于流过薄膜的电流恒定，增加了注入电荷在多孔结构厚度方向界面处的俘获概率，使沉积电荷密度上升，改善了驻极体的储电能力.然而，这些位于不同层深多孔界面处的俘获电荷在这类功能膜储存或使用过程中，经外激发从脱阱位置 以跳动（hopping）模式输运至背电极的路径相对缩短将导致脱阱电荷衰减较快. 关键词： 恒流电晕充电 聚四氟乙烯多孔膜 驻极体 电荷稳定性     

Zn(BTZ)2白色有机电致发光材料的合成及其器件制备

以PCl₃为脱水剂,将邻氨基硫酚与水杨酸脱水环化合成出2-(2-羟基苯基)苯并噻唑,并进一步将所得产物与乙酸锌反应合成出2-(2-羟基苯基)苯并噻唑螯合锌(Zn(BTZ)₂)材料。以该配合物作为发光层制备出结构为ITO/PVK:TPD/Zn(BTZ)₂/Al近白色电致发光器件,其色坐标位于白场之内(x=0.242,y=0.359),在驱动电压为16V时,亮度达3200cdm²,对应的量子效率为0.32%。进一步在Zn(BTZ)₂中掺入橙红色染料Rubrene,制成ITO/PVK:TPD/Zn(BTZ)₂:Rubrene/Al结构器件,实现了纯白色发光(色坐标值:x=0.324,y=0.343),非常接近于白色等能点,且量子效率达0.47%。最后对上述器件的发光和电学性能进行了深入的研究和探讨。     

Synthesis of New 13-O-Acylavermectin Bl Aglycones

Six new 13-O-acylavermectin Bl aglycones(3-8) were synthesized from avermectin B1 aglycone and their bioactivities were evaluated against Spodoptera exigua, Spodoptera eridania, Tetranychus urticae and Aphis fabae.     

EXISTENCE OF PERIODIC SOLUTION OF A NEURONIC EQUATION

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｂｒａｉｎｏｆｍａｎｋｉｎｄｈａｓｍａｎｙｃｏｇｎｉｔｉｖｅｆｕｎｃｔｉｏｎｓｓｕｃｈａｓｌｅａｒｎｉｎｇ，ａｓｏｃｉａｔｉｏｎａｎｄｏｐｔｉｍｉｚａｔｉｏｎｅｔｃ．．Ｔｈｅｎｅｕｒｏｎｉｓｔｈｅｍｏｓｔｆｏｕｎｄａｍ...     

苯基取代聚乙炔中的元激发

苯环取代聚乙炔是一类具有简并基态的发光聚合物.利用扩展的SuSchriefferHeeger模型,研究了这类聚合物链中的孤子、极化子等元激发特性.结果表明:由于苯环与聚乙炔主链间的强π电子耦合,苯环取代抑制了聚乙炔主链的二聚化,减小了导带与价带之间的能隙;因此取代聚乙炔中的元激发具有较小的激发能,同时具有更大的相干长度.尽管苯基取代对元激发有很大的影响,但是非取代聚乙炔中元激发的基本物理规律依然成立,表明这些元激发的基本特性不受取代基团的影响 关键词： 孤子 极化子 苯基取代聚乙炔     

Dielectric effect on the rf characteristics of a helical groove travelling wave tube

A new type of partial-dielectric-loaded helical groove slow-wave structure (SWS) for millimetre wave travelling wave tube (TWT） is presented in this paper.The radio-frequency characteristics including the dispersion properties,the longitudinal electric field distribution and the beam-wave coupling impedance of this structure are analysed.The results show that the dispersion of the helical groove circuit is weakened,the phase velocity is reduced and the position of the maximum Ez is moved from the mouth to the inside of the groove after partially filling the dielectric materials in the helical groove SWS.Therefore,the dielectric-loaded helical groove SWS is suitable for a multi-beam TWT with broad band and high gain.     

Accurate mass measurements of organic compounds by an internal standard method for laser desorption/electron impact fourier transform mass spectrometry

A method for determining accurate relative molecular masses and elemental compositions of several non-volatile and thermally labile organic compounds in the source cell was established. The experimental sequence included laser desorption/electron impact Fourier transform mass spectrometry and direct-mode observation over a narrow mass range. Perfluorotributylamine was used as internal calibrant. Errors were about 1 ppm.     

The optical properties of planar waveguides in LiB3O5 crystals formed by Cu implantation

A planar optical waveguide has been formed in a LiB₃O₅ crystal using 6.0 MeV Cu⁺-ions with a dose of 1 × 10¹⁵ ions/cm² at room temperature. Possible propagating modes were measured at a wavelength of 633 nm using the prism-coupling method. The refractive index profiles of the waveguide were reconstructed by an effective refractive index method and the beam propagation method was used to investigate the properties of the propagation modes in the formed waveguide. The results suggest that the fundamental TE₀ and TM₀ modes may be well-confined and propagate a longer distance inside the waveguide. The implantation process was also simulated using the transport of ions in matter code (TRIM), which indicates that the nuclear energy deposition may be the main factor for the refractive index change.     

Multiple doubly periodic solutions of semi-linear damped beam equations

The purpose of this work is to investigate the weakened Ambrosetti–Prodi type multiplicity results for weak doubly periodic solutions of damped beam equations. By using the topological degree theory, the author obtains a result which is similar to the result for damped wave equations in the literature.