Oxygen harvesting from carbon dioxide: simultaneous epoxidation and CO formation

Due to increasing concentrations in the atmosphere, carbon dioxide has, in recent times, been targeted for utilisation (Carbon Capture Utilisation and Storage, CCUS). In particular, the production of CO from CO₂ has been an area of intense interest, particularly since the CO can be utilized in Fischer–Tropsch synthesis. Herein we report that CO₂ can also be used as a source of atomic oxygen that is efficiently harvested and used as a waste-free terminal oxidant for the oxidation of alkenes to epoxides. Simultaneously, the process yields CO. Utilization of the atomic oxygen does not only generate a valuable product, but also prevents the recombination of O and CO, thus increasing the yield of CO for possible application in the synthesis of higher-order hydrocarbons.

Selective formation of atomic oxygen to form epoxides in a waste free process is reported. Simultaneously generating carbon monoxide from carbon dioxide for further use.     

New renin inhibitors containing pseudodipeptidic units in P3-P2 and P1-P1' positions

A series of four non-peptidic renin inhibitors have been designed and synthesized. All of them contain in their molecule (3S,4S)-4-amino-5-cyclohexyl-3-hydroxypentanoic acid (ACHPA), a hydrophobic portion at the C-terminus and a second dipeptide-like transition state analog or unnatural dipeptidic fragment at the N-terminus. Inhibitory activity of the compounds was measured in vitro by high performance liquid chromatography (HPLC). Their IC50 (M/l) values were: <10(-3) (12), 1.0 x 10(-6) (19), 4.0 x 10(-4) (23) and 1.0 x 10(-6) (29), respectively. All the compounds are stable against chymotrypsin.     

N-Nitrosodimethylamine Contamination in the Metformin Finished Products

A GC–MS/MS method with EI ionization was developed and validated to detect and quantify N-nitrosodimethylamine (NDMA) and seven other nitrosamines in 105 samples of metformin tablets from 13 different manufactures. Good linearity for each compound was demonstrated over the calibration range of 0.5–9.5 ng/mL. The assay for all substances was accurate and precise. NDMA was not detected in the acquired active pharmaceutical ingredient (API); however, NDMA was detected in 64 (85.3%) and 22 (91.7%) of the finished product and prolonged finished product samples, respectively. European Medicines Agency recommends the maximum allowed limit of 0.032 ppm in the metformin products. Hence, 28 finished products and 7 pronged dosage products were found to exceed the acceptable limit of daily intake of NDMA contamination. The implications of our findings for the testing of pharmaceutical products are discussed.     

Trichloroethylene,tetrachloroethylene and carbon tetrachloride in an urban atmosphere: mixing ratios and temporal patterns

The measurement of halogenated hydrocarbons in the atmosphere is a matter of great interest owing to their adverse effects on the human health and the environment. This work is focused on the measurement of three toxic chlorinated hydrocarbons: trichloroethylene (TCE), tetrachloroethylene (PCE), and carbon tetrachloride (CTC). Moreover, CTC is a greenhouse gas and an ozone depleting gas, restricted under the Montreal Protocol. Owing to their low reactivity, the target chlorinated hydrocarbons are considered to be persistent and, thus, many measurements only address their mean mixing ratios (a concentration measure expressed as mol/mol). Consequently, most of the reported data have low temporal resolution as daily, seasonal or yearly mean mixing ratios, obtained with few measurements. In the study reported in this paper hourly measurements were performed for a long period of time: almost two years for TCE and PCE, and one year for CTC. The main objective was to study the temporal variability of the chlorinated hydrocarbons with high temporal resolution in order to identify their main sources and to enhance the understanding of their atmospheric processes. During the measurement period, March 2007–February 2008 with N?=?3290 valid data, CTC showed a mean mixing ratio of 0.16?ppbv (SD?=?0.13) with lower temporal variability than the majority of non-methane hydrocarbons (NMHCs), being very well mixed in the urban atmosphere owing to its long lifetime. TCE and PCE mean mixing ratios for the May 2006–February 2008 period, were 0.13?ppbv (SD?=?0.42, N?=?4601) and 0.25?ppbv (SD?=?0.54, N?=?4709) respectively, with a larger temporal variability. The study of the sources of TCE and PCE reveals that both compounds have industrial and/or commercial origin, but with different main sources.     

Time-resolved luminescence detection of peroxynitrite using a reactivity-based lanthanide probe

Peroxynitrite (ONOO⁻) is a powerful and short-lived oxidant formed in vivo, which can react with most biomolecules directly. To fully understand the roles of ONOO⁻ in cell biology, improved methods for the selective detection and real-time analysis of ONOO⁻ are needed. We present a water-soluble, luminescent europium(iii) probe for the rapid and sensitive detection of peroxynitrite in human serum, living cells and biological matrices. We have utilised the long luminescence lifetime of the probe to measure ONOO⁻ in a time-resolved manner, effectively avoiding the influence of autofluorescence in biological samples. To demonstrate the utility of the Eu(iii) probe, we monitored the production of ONOO⁻ in different cell lines, following treatment with a cold atmospheric plasma device commonly used in the clinic for skin wound treatment.

Reactivity-based europium(iii) probe displays excellent selectivity for peroxynitrite (ONOO⁻), enabling its time-resolved luminescence detection in living cells.     

Stable dialkyl ether/poly(hydrogen fluoride) complexes: dimethyl ether/poly(hydrogen fluoride), a new,convenient, and effective fluorinating agent

The preparation, (1)H, (13)C, and (19)F NMR structural characterization as well as with DFT-based theoretical calculations of stable dialkyl ether/poly(hydrogen fluoride) complexes are reported. Dimethyl ether/poly(hydrogen fluoride) (DMEPHF), are stable complexes of particular interest and use. The DFT calculations, that are in agreement with NMR data, suggest a cyclic poly(hydrogen fluoride) bridged structure for DMEPHF. The complex, DME-5 HF was found to be a convenient and effective new fluorinating agent with the ease of workup and applied to several fluorination reactions, such as the hydrofluorination and bromofluorination of alkenes, and fluorination of alcohols giving good to excellent yield with high selectivity. Homologous dialkyl ether/poly(hydrogen fluoride) (R(2)O/[HF](n,), R = Et, nPr) systems are also stable and suitable for fluorination reactions.     

Secondary ion emission induced by fission fragment impact in CO-NH(3) and CO-NH(3)-H(2)O ices: modification in the CO-NH(3) ice structure

CO-NH(3) and CO-NH(3)-H(2)O ices at 25-130 K were bombarded by (252)Cf fission fragments ( approximately 65 MeV at the target surface) and the emitted secondary ions were analyzed by time-of-flight mass spectrometry (TOF-SIMS). It is observed that the mass spectra obtained from both ices have similar patterns. The production of hybrid ions (formed from CO and NH(3) molecules) emitted from CO-NH(3) ice has already been reported by R. Martinez et al., Int. J. Mass. Spectrom. 262 (2006) 195; here, the secondary ion emission and the modifications of the CO--NH(3) ice structure during the temperature increase of the ice are addressed. These studies are expected to throw light on the sputtering from planetary and interstellar ices and the possible formation of new organic molecules in CO-NH(3)-H(2)O ice by megaelectronvolt ion bombardment. The presence of water in the CO-NH(3) ice mixture generates molecular ion series such as (NH(3))(p-q)(H(2)O)(q)CO(+) and replaces the cluster series (NH(3))(n)NH(4) (+) emission by the hybrid series (NH(3))(I-i)(H(2)O)(i=1, 2...I)H(+). The distribution of NH(3) and H(2)O molecules within the cluster groups indicates that ammonia and water mix homogeneously in the icy condensate at T = 25 K. The desorption yield distribution of the cluster series (NH(3))(n)NH(4) (+) is described by the sum of two exponential functions: one, slow-decreasing, attributed to the fragmentation of the solid target into clusters; and another, fast-decreasing, due to a local sublimation followed by recombination of ammonia molecules. The analysis of the time-temperature dependence of these two yield components gives information on the formation process of molecular ions, the transient composition of the ice target and structural changes of the ice. Data suggest that the amorphous and porous structure of the NH(3) ice, formed by the condensation of the CO--NH(3) gas at T = 25 K, survives CO sublimation until the occurrence of a phase transition around 80 K, which produces a more fragile ice structure.     

Rheology of compatibilized immiscible viscoelastic polymer blends

Rheological behavior of a PS/PE model viscoelastic immiscible blend compatibilized by two types of interfacial modifiers was investigated. Dynamic, steady shear, and transient experiments were performed to probe the effect of the interfacial modification on the rheological behavior of the blend. While the effect was relatively small in dynamic and steady shear experiments, significant signature of the presence of the copolymer was observed in transient experiments after start up of shear flow. The magnitude of the departure from Doi-Otha theory (worked out for non-compatibilized blends) was evaluated. Received: 6 March 2000 Accepted: 15 June 2000