Michael addition reactions between chiral equivalents of a nucleophilic glycine and (S)- or (R)-3-[(E)-enoyl]-4-phenyl-1,3-oxazolidin-2-ones as a general method for efficient preparation of beta-substituted pyroglutamic acids. Case of topographically controlled stereoselectivity

This paper describes a systematic study of addition reactions between the chiral Ni(II) complex of the Schiff base of glycine with (S)-o-[N-(N-benzylprolyl)amino]benzophenone and (S)- or (R)-3-[(E)-enoyl]-4-phenyl-1,3-oxazolidin-2-ones as a general and synthetically efficient approach to beta-substituted pyroglutamic acids and relevant compounds. These reactions were shown to occur at room temperature in the presence of nonchelating organic bases and, most notably, with very high (>98% diastereomeric excess (de)) stereoselectivity at both newly formed stereogenic centers. The stereochemical outcome of the reactions was found to be overwhelmingly controlled by the stereochemical preferences of the Michael acceptors, and the chirality of the glycine complex influenced only the reaction rate. Thus, in the reactions of both the (S)-configured Ni(II) complex and the Michael acceptors, the reaction rates were exceptionally high, allowing preparation of the corresponding products with virtually quantitative (>98%) chemical and stereochemical yields. In contrast, reactions of the (S)-configured Ni(II) complex and (R)-configured Michael acceptors proceeded at noticeably lower rates, but the addition products were obtained in high diastereo- and enantiomeric purity. To rationalize the remarkably high and robust stereoselectivity observed in these reactions, we consider an enzyme-substrate-like mode of interaction involving a topographical match or mismatch of two geometric figures. Excellent chemical and stereochemical yields, combined with the simplicity and operational convenience of the experimental procedures, render the present method of immediate use for preparing various beta-substituted pyroglutamic acids and related compounds.     

Fluorescence and Laser photolysis studies on 1,2,4,5-tetracy anobenzene CT complexes in micellar solutions

CT complexes of 1,2,4,5-tetracyanobenzene were formed in the inner part of neutral micelles and in the surface region of ionic ones. The excitation of the CT absorption band of these complexes gives broad and structureless CT fluorescence spectra, their lifetimes being relatively short (≈10 ns). Micellar effect upon ionic photodissociation was observed, and their quantum yeild is smaller than that obtained in acetonitrile. These results are quite different from those on another typical excited CT system of pyrene and N,N-dimethylaniline.     

Substoichiometric isotope-dilution determination of sulphur after conversion to methylene blue and ion-pair extraction with dodecyl sulphate

The proposed substoichiometric determination of sulphur includes two key steps: conversion of sulphur to methylene blue and ion-pair extraction of methylene blue into chloroform with a substoichiometric amount of dodecyl sulphate. The method, combined with isotope dilution is applied to the determination of total sulphur in NBS SRM Citrus Leaves and in a seaweed sample (Laminaria religiosa Miyabe). The mean values obtained were 0.401±0.008% S (RSD 2%; n=9; certified value 0.407±0.009%) for the SRM, and 0.756±0.012% S (RSD 1.6%; n=5) for the seaweed. A sample of 0.5–1 g containing ca. 100 μg of sulphur can be analysed.     

Unambiguously confirmed structure of 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one

To determine the structures of two isomeric products, 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (2) and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (3) obtained by condensation of 2,3-diaminopyridine (1) with ethyl benzoylpyruvate [1–3], these compounds were hydrolyzed to give 2-methyl-4H-pyrido[2,3-b]pyrazin-3-one (4) and 3-methyl-1H-pyrido[2,3-b]pyrazin-2-one (5) , respectively [4,5]. Both hydrolysates 4 and 5 were hydrogenated to afford 2-methyl-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (6) and 3-methyl-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (7) . The latter compound was identical with an unequivocally synthesized compound providing proof for the structures of all these compounds.     

Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Efficient synthesis of thioesters and amides from aldehydes by using an intermolecular radical reaction in water

The combination of the water-soluble radical initiator, 2,2'-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (VA-044) and the surfactant, cetyltrimethyl-ammonium bromide (CTAB), was found to be the most suitable condition for the effective and direct synthesis of useful active thioesters (pentafluorophenyl thioesters) in water. In addition, the direct amidation of aldehydes was achieved by the addition of the amines to the thioesterification reaction mixture in water.     

Cobalt-catalyzed hydrohydrazination of dienes and enynes: access to allylic and propargylic hydrazides

[reaction: see text] The cobalt-catalyzed hydrohydrazination reaction of dienes and enynes is presented. Allylic and propargylic hydrazines were obtained in synthetically useful yields (allylic amines, 60-90%; propargylic amines, 47-83%) and good chemo- and regioselectivity.     

Cover Picture

The cover picture shows a section of the electron charge density of the first metal carbide endohedral metallofullerene (Sc(2)C(2))@C(84) obtained from a synchrotron X-ray powder diffraction study by the maximum entropy method (MEM). The several density maxima, which correspond to scandium and carbon atoms, are clearly seen inside the C(84) carbon cage. The MEM charge density distribution also reveals that the C(84) cage has D(2d) symmetry (no. 23) and that the C(2) axis is parallel to the <100> face-centered cubic (fcc) direction of the unit cell. As a consequence of the site symmetry being 4mm, the C(2) axis of (Sc(2)C(2))@C(84) is oriented to six equivalent <100> directions and shows a merohedral disorder. The resultant Sc small middle dot small middle dot small middle dotSc distances and C-C bond lengths of the Sc(2)C(2) cluster are 0.429(2) and 0.142(6) nm, respectively. The observed C-C bond length is between that of a typical single and a double bond, and is very close to that of the C-C bond (0.143 nm) combining two pentagons in a C(60) molecule. More about this fascinating structure can be found in the contribution by Shinohara and co-workers on p. 397 ff.     

Magnetic/Conducting Hybrid Compound Composed of 1-D Chain [Mn2Cl5(EtOH)]∞ and BEDT-TTF Stacking Layer

An assembled compound (BEDT-TTF)₂[Mn₂Cl₅(EtOH)] (1) consisting of two structural lattices of Mn(II)-Cl one-dimensional (1-D) chains and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) stacking layers was synthesized by electrochemical crystallization. Compound 1 crystallized in triclinic space group P-1 (#2) with a=13.1628(5) Å, b=20.3985(9) Å, c=7.4966(3) Å, α=98.3498(8)°, β=104.980(1)°, γ=74.602(2)°, V=1868.3(1) ų, and Z=2. The 1-D chains and the stacking layers are aligned along the c-axis of the unit cell. The 1-D chain is described as [Mn₂Cl₅(EtOH)]_∞⁻ in which two Mn(II) ions and four Cl⁻ ions form a ladder-like chain with Kagomé (cuboidal) sublattices, and the remaining Cl⁻ ion and an ethanol molecule cap the edge-positioned Mn(II) ions of the chains. The BEDT-TTF molecules are packed between the Mn-Cl chains (ac-plane), the intermolecular S·S contacts of which are approximately found in the range 3.440(2)-3.599(2) Å. The packing feature of BEDT-TTF molecules is very similar to that of (BEDT-TTF)₂ClO₄(TCE)_0.5 (TCE=1,1,2-trichloroethane) (J. Am. Chem. Soc., 105, 297 (1983)). Regarding the electronic state of each BEDT-TTF molecule, Raman spectroscopic analysis and ESR study revealed the presence of half-valence BEDT-TTF molecules (charge delocalization) in 1. Magnetic measurements clearly demonstrated that the paramagnetic spins on the 1-D chain [Mn₂Cl₅(EtOH)]_∞⁻ arrange antiferromagnetically in the low-temperature region. Additionally, 1 exhibits metallic conductivity in the temperature range 2.0-300 K (σ=21 S cm⁻¹ at 300 K and 1719 S cm⁻¹ at 2.0 K), due to the contribution of the stacked BEDT-TTFs. Consequently, these peculiarities that correspond to antiferromagnetic/metallic conductivity demonstrate the “bi-functionality” of 1.