Biopharmaceutical Study on Nobiletin-Loaded Amorphous Solid Dispersion with Improved Hypouricemic Effect

The present study aimed to develop an amorphous solid dispersion of nobiletin (ASD/NOB) using hydroxypropyl cellulose-SSL (HPC-SSL) to improve the pharmacokinetic properties and hypouricemic effect of NOB. ASD/NOB was prepared by the freeze-drying method (ASD/NOB). ASD/NOB was characterized with a focus on crystallinity, dissolution, pharmacokinetic behavior, and hypouricemic action in a rat model of hyperuricemia. ASD/NOB showed significant improvement in dissolution behavior, as evidenced by a 4.4-fold higher dissolved NOB concentration than crystalline NOB at 2 h in distilled water. After the oral administration of ASD/NOB (50 mg NOB/kg) in rats, higher systemic exposure to NOB was observed with an 18-fold enhancement in oral bioavailability, and the T_max value of orally administered ASD/NOB was 60% shorter than that of orally administered crystalline NOB. In a rat model of hyperuricemia, orally dosed ASD/NOB showed an improved hypouricemic effect by a 16% reduction in the plasma uric acid level compared with orally administered crystalline NOB. Based on these findings, ASD/NOB may be an efficacious dosage option to improve the nutraceutical potential of NOB for the treatment of hyperuricemia.     

Preparation and photocatalytic wettability conversion of TiO2-based superhydrophobic surfaces

We present here a facile method for the preparation of TiO2-based superhydrophobic surfaces. It consists of two steps: (1) roughening of the TiO2 surface with a rf (radio frequency) plasma with CF4 as an etchant and (2) modification of the roughened TiO2 surface with an octadodecylphosphonic acid (ODP) monolayer. Plasma etching caused the thinning of the TiO2 film but at the same time enhanced its surface roughness. A discontinuous wedgelike surface microtexture was formed after etching for 30 s, which, after modification with a monolayer of ODP, showed Cassie-type water super-repellency with a contact angle (CA) hysteresis smaller than 2 degrees . The state of water super-repellency (water CA >165 degrees) could be converted to the state of superhydrophilicity (water CA approximately 0 degrees) by means of ultraviolet (UV) illumination as a result of the photocatalytic decomposition of the ODP monolayer by TiO2. Readsorption of ODP molecules leads directly to the recovery of water super-repellency.     

Entanglement of polymer chains in ultrathin films

This investigation aimed to clarify the issue of whether polymer chains are entangled in ultrathin films spin-coated onto substrates. This was done using a fluorescence probe method to observe the behavior of two types of poly(methyl methacrylate) (PMMA), one having a carbazolyl (Cz) moiety (PMMA-Cz) and the other having an anthryl (At) moiety (PMMA-At). In both cases, the moiety fraction was 1 unit for 400 units of polymer. We prepared ultrathin films (thickness: 4-88 nm) on quartz substrates from PMMA-Cz, PMMA-At, and a mixture of the two using a spin-coating method. When the PMMA films prepared from the mixture of the two PMMAs were excited at 292 nm, which is preferentially absorbed by Cz rather than At, the Cz fluorescence was found to be quenched dramatically while the At fluorescence increased significantly. This effect is due to the proximity of the Cz to the At, which permits the transfer of excitation energy between them. The average distance between Cz and At can be calculated using the F?rster mechanism. When the ultrathin film thickness was between 12 and 88 nm, the average distance was found to be 2 nm. This is much shorter than the radii of gyration of the polymers. From this it is clear that two polymer molecules in an ultrathin film do experience entanglement, as has been hypothesized. Thus, we conclude that the difference between certain properties of ultrathin films and the properties of the same materials in bulk are not induced by a decrease in the level of polymer chain entanglement.     

Immobilization and enzymatic activity of glucose oxidase on polystyrene surface modified with ozone aeration and UV irradiation in distilled water and/or aqueous ammonia solution

Adsorption condition and enzymatic activity of glucose oxidase (GOD) on polystyrene (PS) film surfaces modified with ozone aeration and UV irradiation (O3/UV) treatment were investigated. The total amount of GOD immobilized on the PS film modified with the O3/UV treatment in distilled water (PS-W film) was approximately twice as large as that on the film treated in an aqueous ammonia solution (PS-A film), whereas the specific activity of GOD on the PS-A film was four times higher than that on the PS-W film. In contrast, no enzymatic activity of GOD on the non-treated PS film was observed because of irreversible denaturation of the adsorbed GOD. We therefore conclude that the PS films modified by the O3/UV treatment in the aqueous media are effective in immobilizing GOD.     

Naturally engineered glycolipid biosurfactants leading to distinctive self-assembled structures

Self-assembling properties of "natural" glycolipid biosurfactants, mannosyl-erythritol lipids A and B (MEL-A, MEL-B), which are abundantly produced from yeast strains, were investigated by using the fluorescence-probe method, dynamic light-scattering (DLS) analysis, freeze-fracture transmission electron microscopy (FF-TEM), and synchrotron small/wide-angle X-ray scattering (SAXS/WAXS) analysis, among other methods. Both MEL-A and MEL-B exhibit excellent self-assembly properties at extremely low concentrations; they self-assemble into large unilamellar vesicles (LUV) just above their critical-aggregation concentration (CAC). The CAC(I) value was found to be 4.0x10(-6) M for MEL-A and 6.0x10(-6) M for MEL-B. Moreover, the self-assembled structure of MEL-A above a CAC(II) value of 2.0x10(-5) M was found to drastically change into sponge structures (L3) composed of a network of randomly connected bilayers that are usually obtained from a complicated multicomponent "synthetic" surfactant system. Interestingly, the average water-channel diameter of the sponge structure was 100 nm. This is relatively large compared with those obtained from "synthetic" surfactant systems. In addition, MEL-B, which has a hydroxyl group at the C-4' position on mannose instead of an acetyl group, gives only one CAC; the self-assembled structure of MEL-B seems to gradually move from LUV to multilamellar vesicles (MLV) with lattice constants of 4.4 nm, depending on the concentration. Furthermore, the lyotropic-liquid-crystal-phase observation at high concentrations demonstrates the formation of an inverted hexagonal phase (H2) for MEL-A, together with a lamella phase (L(alpha)) for MEL-B, indicating a difference between MEL-A and MEL-B molecules in the spontaneous curvature of the assemblies. These results clearly show that the difference in spontaneous curvature caused by the single acetyl group on the head group probably decides the direction of self-assembly of glycolipid biosurfactants. The unique and complex molecular structures with several chiral centers that are molecularly engineered by microorganisms must have led to the sophisticated self-assembling properties of the glycolipid biosurfactants.     

Novel orbital ordering induced by anisotropic stress in a manganite thin film

A novel structure of orbital ordering is found in a Nd0.5Sr0.5MnO3 thin film, which exhibits a clear first-order transition, by synchrotron x-ray diffraction measurements. Lattice parameters vary drastically at the metal-insulator transition at 170 K (= T(MI)), and superlattice reflections appear below 140 K (= T(CO)). The electronic structure between T(MI) and T(CO) is identified as A-type antiferromagnetic with a d(x2-y2) ferro-orbital ordering. The new type of antiferro-orbital ordering characterized by the wave vector (1/4 1/4 1/2) in cubic notation emerges below T(CO). The accommodation of the large lattice distortion at the first-order phase transition and the appearance of the novel orbital ordering are brought about by the anisotropy in the substrate, a new parameter for the phase control.     

Dissipative Quasi-Geostrophic Equation for Large Initial Data in the Critical Sobolev Space

The critical and super-critical dissipative quasi-geostrophic equations are investigated in . We prove local existence of a unique regular solution for arbitrary initial data in H ^2-2α which corresponds to the scaling invariant space of the equation. We also consider the behavior of the solution near t = 0 in the Sobolev space.     

Disorder-enhanced dielectric response of nanoscale and mesoscopic insulators

Enhancement of the dielectric response of insulators by disorder is theoretically proposed, where the quantum interference of electronic waves through the nanoscale or mesoscopic system and its change due to external perturbations control the polarization. In the disordered case with all the states being localized, the resonant tunneling, which is topologically protected, plays a crucial role, and enhances the dielectric response by a factor 30-40 compared with the pure case. The realization of this idea with accessible materials or structures is also discussed.     

Anisotropic x-ray emission from heliumlike Fe24+ ions aligned by resonant coherent excitation with a periodic crystal potential

We have measured deexcitation x rays emitted from the resonant coherently excited 2(1)P(1) state of heliumlike Fe24+ ions of 423 MeV/amu, planar channeling through a Si crystal. Large anisotropy in the angular distribution of deexcitation x-ray emission is observed: the x-ray emission in the direction parallel to the channeling plane is favored by a factor of 2 compared to the perpendicular direction. This anisotropy originates from the direction of the periodic crystal field, which populates specific m states in resonant coherent excitation and aligns the excited states.