Layer-by-layer fabrication and characterization of DNA-wrapped single-walled carbon nanotube particles

Carbon nanotubes have been proposed as support materials for numerous applications, including the development of DNA sensors. One of the challenges is the immobilization of DNA or other biological molecules on the sidewall of carbon nanotubes. This paper introduces a new fabrication of DNA-carbon nanotubes particles using the layer-by-layer (LBL) technique on single-walled carbon nanotubes (SWCNTs). Poly(diallyldimethylammonium) (PDDA), a positively charged polyelectrolyte, and DNA as a negatively charged counterpart macromolecule are alternatively deposited on the water-soluble oxidized SWCNTs. Pure DNA/PDDA/SWCNTs particles can be prepared and separated by simple unltracentrifugation. The characterization of DNA/PDDA/SWCNTs particles was carried out by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy, Raman spectroscopy, and thermogravimetric analysis (TGA). An electrode modified by the DNA/PDDA/SWCNTs particles shows a dramatic change of the electrochemical signal in solutions of tris(2,2'-bipyridyl)ruthenium(II) ((Ru(bpy)(3)2+) as a reporting redox probe. A preliminary application of the DNA-modified carbon nanotubes in the development of DNA sensors used in the investigation of DNA damage by nitric oxide is presented.     

Diterpenoids of Isodon macrophylla

Two new ent‐abietane diterpenoids, macrophynin E ( 1 ) and macrophynin F ( 2 ), and a known related ent‐abietanoid (?)‐lambertic acid ( 3 ), together with four known ent‐kauranoids, were isolated from the roots and aerial parts of Isodon macrophylla, respectively. The structures of the new compounds were elucidated on the basis of spectroscopic‐data analysis and chemical correlations.     

BLUE LIGHT-EMITTING COIL-ROD-COIL BLOCK OLIGOMERS WITH RIGID p-HEXAPHENYL AS CHROMOPHORE

The synthesis and characterization of coil-rod-coil triblock oligomers, poly（ethylene oxide）-b-p-hexaphenyl-b- poly（ethylene oxide）, are described. The number of repeating ethylene oxide units in each flexible block are 3 （EO3-PHP- EO3）, 8 （EOs-PHP-EO8）, 13 （EO13-PHP-EO13）, and 17 （EO17-PHP-EO17）, respectively. The structures of these oligomers are confirmed by ^1H-NMR, 13C-NMR, EA, and MALDI-TOF mass spectrometry. The introduction of soluble poly（ethylene oxide） coils to the rigid p-hexaphenyl segment significantly improves the solubility of the oligomers, so they can form smooth thin films by spin-coating from their solutions. The oligomers are quite thermally stable and have 1% weight loss temperatures at above 340℃ under nitrogen. They can emit strong blue light in both solution and film state, and have fluorescence quantum yields of about 40% in chloroform. They are expected to have potential applications in optoelectronic devices.     

Ultraviolet photochemistry of ethane: implications for the atmospheric chemistry of the gas giants

Chemical processing in the stratospheres of the gas giants is driven by incident vacuum ultraviolet (VUV) light. Ethane is an important constituent in the atmospheres of the gas giants in our solar system. The present work describes translational spectroscopy studies of the VUV photochemistry of ethane using tuneable radiation in the wavelength range 112 ≤ λ ≤ 126 nm from a free electron laser and event-triggered, fast-framing, multi-mass imaging detection methods. Contributions from at least five primary photofragmentation pathways yielding CH₂, CH₃ and/or H atom products are demonstrated and interpreted in terms of unimolecular decay following rapid non-adiabatic coupling to the ground state potential energy surface. These data serve to highlight parallels with methane photochemistry and limitations in contemporary models of the photoinduced stratospheric chemistry of the gas giants. The work identifies additional photochemical reactions that require incorporation into next generation extraterrestrial atmospheric chemistry models which should help rationalise hitherto unexplained aspects of the atmospheric ethane/acetylene ratios revealed by the Cassini–Huygens fly-by of Jupiter.

The vacuum ultraviolet photodissociation dynamics of ethane provide clues for modelling the atmospheric chemistry of the gas giants.     

Self-assembly of gold nanoparticles on fullerene nanospheres

A C60-pyrrolidine derivative with a hydrophobic-hydrophilic-hydrophobic structure (2-{3,4-di{2-[2-(2-decyloxyethoxy)ethoxy]ethoxy}}phenyl-3,4-fulleropyrrolidine, DTPF) has been synthesized and well-characterized. This compound could form stable nanospheres by simply injectingits tetrahydrofuran (THF) solution into water and then removing THF by purging gaseous nitrogen in sequence. Novel nanoassemblies of DTPF nanospheres and gold nanoparticles were obtained through in situ photoreduction of aqueous HAuCl4 in the presence of DTPF nanospheres, which were confirmed by UV-visible, transmission electron microscopy, X-ray powder diffraction, and X-ray photoelectron spectroscopy methods. It is proposed that the interaction between the positively charged nitrogen atom and the gold nanoparticles is the main driving force for the formation of the nanoassemblies.     

Standard molar enthalpies of formation of Ln(C9H6NO)2(C2H3O2) (Ln: Nd, Sm)

Using an on-line solution-reaction isoperibol calorimeter, the standard molar enthalpies of reaction for the general thermochemical reaction: LnCl₃·6H₂O(s) + 2C₉H₇NO(s) + CH₃COONa(s) = Ln(C₉H₆NO)₂(C₂H₃O₂)(s) + NaCl(s) + 2HCl(g) + 6H₂O(l) (Ln: Nd, Sm), were determined at T=298.15 K, as  kJ mol^−l, respectively. From the mentioned standard molar enthalpies of reaction and other auxiliary thermodynamic quantities, the standard molar enthalpies of formation of Ln(C₉H₆NO)₂(C₂H₃O₂)(s) (Ln: Nd, Sm), at T=298.15 K, have been derived to be: −(1494.7±3.3) and −(1501.5±3.4) kJ mol^−l, respectively.     

Kinetics and mechanism of electron-induced splitting of a cyclobutane pyrimidine dimer with or without an electron acceptor

DNA repair has received heightened attention in recent years as ozone depletion threatens to significantly increase DNA damage by UVB radiation[1—6]. The major lesions formed in DNA by this radiation are cis-syn cyclobutane pyrimidine dimers, which are created by the linkage of two neighboring pyrimidine bases in DNA via C5-C5 and C6-C6 atoms by [2+2] cycloaddition[2,5—8]. This potentially lethal or mutagenic damage can be repaired either by the removal of the damaged bases by excisio…     

Retine Part I. Purification and Partial Characterization of Retine from Pig Liver

A modified method has been developed to purify retine from pig liver. The crude extract of retine can be separated into five fractions by paper chromatography, each of them having been tested for the effect on the proliferation of protozoal Tetrahymena Pyriformis. One of the fractions, G₃, has the strongest effect. The present results show that G₃ fraction showed positive reactions toward 2,4-dinitro-phenyl hydrazine, ethylene diamine, and ninhydrin. Other properties of the fraction has also been studied.     

Optimization of the process parameters of synthesis of vinblastine imprinted polymer

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for the template molecule. This selectivity arises from the synthetic procedure followed to prepare the MIP. In this work, the influence of process parameters on the preparation of vinblastine (VLB) imprinted polymers was presented. In the procedure of polymerization, VLB (0.1 mmol) was used as the template molecule and a commonly used initiator, azobisisobutyronitrile (AIBN), was employed to initiate the reaction at 60 °C. The influence of the following parameters was investigated: the moles of functional monomer (MAA, 0.3-1.0 mmol), the moles of cross-linker (EDMA, 1.5-5.0 mmol) and the porogenic solvent (toluene or acetonitrile). A mathematical method of uniform design was applied to optimize these selected parameters in order to increase the selectivity of MIP for template molecule. The experimental data were analyzed to obtain the regression model and the optimal conditions were achieved by optimization with uniform design software. The MIP was synthesized under the optimal conditions that 1.0 mmol of MAA and 5.0 mmol of EDMA copolymerized in toluene in the presence of 0.1 mmol of VLB. After removal of the template molecule, the obtained MIP was then employed as the sorbents of solid-phase extraction (SPE) to separate VLB from Catharanthus roseus extract. The results showed that the polymer exhibited high affinity to the template molecule and could separate and enrich VLB from C. roseus extract effectively. The recovery of VLB on the optimal MIP was 89.00%, which agreed closely with the predicted recovery. Therefore it is possible to further improve the nature of the polymer by optimizing the polymerization parameters with the method of uniform design.     

Novel Electroless Deposition of Cu<Subscript>3</Subscript>Se<Subscript>2</Subscript> Film on Silicon Substrate by a Simple Galvanic Displacement Process

A novel electroless deposition method for depositing highly uniform adhesive thin films of copper selenide (Cu₃Se₂) on silicon substrates from aqueous solutions is described. The deposition is carried out by two coupled galvanic reactions in a single deposition bath containing copper cations, hydrogen fluoride, and selenous acid: the galvanic deposition of copper on silicon and the subsequent galvanic reaction between the deposited copper with selenous acid in the deposition bath. The powder X-ray diffraction and scanning electron microscopy are used to characterize and examine the deposited films.