Annealing and measurement temperature dependence of W2B5-based rectifying contacts to n-GaN

The thermal stability and measurement temperature dependence of Schottky contact characteristics on n-GaN using a W₂B₅/Ti/Au metallization scheme was studied using current-voltage (I-V), scanning electron microscopy (SEM) and Auger electron spectroscopy (AES) measurements. The elemental profile obtained from samples annealed at 350 °C showed some titanium diffusion into the gold layer but little other difference from the as-deposited wafer. Annealing at 700 °C produced significant diffusion of titanium. The Schottky barrier height increased with anneal temperature up to 200 °C, reaching a maximum value of 0.65 eV, but decreased at higher annealing temperatures. The reverse breakdown voltage from diodes fabricated using the W₂B₅-based contacts showed a similar dependence. The reverse current magnitude was larger than predicted by thermionic emission alone. The barrier height showed only minor changes with measurement temperature up to 150 °C.     

基于P-N结的太阳能电池伏安特性的分析与模拟

通过分析实际P-N结与理想模型之间的差别,建立了P-N结二极管及太阳能电池的数学模型;利用Matlab中的系统仿真模块库建立仿真模型,设置参量,求解模型方程并绘制了图形.对太阳能电池在一定光照下旁路电阻及串联电阻取不同数值时对其开路电压、短路电流及填充因子的影响做了模拟,并与实际测得的硅太阳能电池伏安特性进行了比较.模型分析与实验测量的结果表明:等效的旁路电阻和串联电阻分别影响电池的开路电压和短路电流.仿真结果与实验测量结果一致.     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

H原子与CO2分子碰撞的化学反应与能量转移

用时间分辨傅立叶红外发射光谱的方法对H原子与CO2分子的碰撞动力学进行了实验研究．用紫外激光光解的方法分别制备出三个不同平动能为174．7、241．0和306．2 kJ／mol的氢原子,并引发H CO2→OH CO反应．观察到了反应的产物,即振动激发的CO (v≤2)．同时也看到了在H原子与CO2分子的碰撞中发生高效的T- V能量转移．CO2的反对称伸缩模的最高振动能级为v=4．化学反应与能量转移的速率之比大约为10．     

F+H2→HF+H反应的全量子态分辨的散射动力学研究

利用高灵敏度的氢原子里德堡飞渡时间谱方法研究了 F H_2→HF H 反应碰撞能在5.02kJ/mol 下的交叉分子束反应态态散射动力学.所有在时间飞渡谱中被观测到的谱峰可以归属为 HF 产物的振转态结构.还观测到了明显的 HF(v’=3)前向散射,以及少许的 HF(v’=2)前向散射.     

随机动力系统的进展和问题

本文主要介绍随机动力系统的主要成果和进一步研究的问题。     

聚乙炔的CH面外振动红外光谱研究

采用从头计算方法，计算了反式和顺式聚乙炔的氢原子在垂直于聚乙炔分子面方向振动的红外光谱，计算表明，Gibson等用红外吸收实验所测得的谱线的确是聚乙炔的CH面外振动产生的谱线，经100℃长时间加热后，顺式聚乙炔变为反式聚炔，但波数为740cm^-1的谱级仍保留5％的强度。     

广义Hénon映射的滑模变结构控制同步

基于可线性化的非线性离散变结构跟踪控制方法实现了广义Hénon映射混沌系统的同步.广义Hénon映射的混沌吸引子比Hénon映射的混沌吸引子要复杂得多,对于保密通信来说,这种复杂性正是所期望的.提出的同步方法允许参数有适当的失配程度,这对工程实现是非常有利的,理论分析和仿真结果证实了该方法的有效性 关键词： 广义Hénon映射 混沌 同步 变结构控制     

因素空间与概念内涵的表示

本文综合应用因素空间、信息系统和重于关系的方法,讨论了概念的内涵表示及其他有关问题。特别是,对在描述概念问题中不同于内涵和外延的第三种方法,即典型示范表示做了进一步的分析。