Synthesis, crystal structures and magnetic properties of Cu(II) compounds bridged by the terephthalate ligand and hydrogen bonds

A 3D network [Cu(tmen)(tp)(H₂O)₂]_n (1) (tmen = N,N,N′,N′-tetramethylethylenediamine; tp = terephthalate) and a 2D sheet [Cu(pyrazole)₂(tp)]_n (2), featuring 1D chains interwoven by hydrogen bonds, have been prepared and characterized by means of X-ray analyses and magnetic measurements. For 1, coordinative zigzag chains contain Cu(II) centers capped by the chelate ligand tmen, in which the tetragonal structure is elongated due to Jahn–Teller distortion. Coordinated water molecules are hydrogen-bonded to two free carboxylate oxygens of tp bridges, leading to the observed 3D structure. The use of the non-chelating capping ligand pyrazole produced the covalent-bonded 1D linear compound 2 with hydrogen bonds. A severe octahedral distortion of the Cu(II) center arises from a small bite angle (52.3(1)°) of two carboxylate oxygen atoms of tp, which are in turn hydrogen-bonded to the N–H groups of pyrazole ligands coordinated to Cu(II) atoms in neighboring chains. Magnetic data were fitted with the high-temperature series expansion for the Heisenberg chain spin Hamiltonian H = −J∑_iS_i · S_i + 1 together with consideration of the molecular field approximation (zJ′). Both compounds interestingly exhibit ferromagnetic interactions with g = 2.17, J = 4.08 cm⁻¹, zJ′ = −0.28 cm⁻¹ for 1 and g = 2.09, J = 1.47 cm⁻¹, zJ′ = −0.04 cm⁻¹ for 2. By taking into account structural parameters of distances between Cu atoms, it is reasonably assigned that the ferromagnetic couplings (J > 0) in these systems originate from the hydrogen bonds. The spin density of the d_x²-y² orbital on a Cu(II) atom in a chain is propagated and induced over the d_z² orbital of another Cu(II) atom in an adjacent chain. This orbital orthogonality gives rise to such interactions. The negative zJ′ term suggests that the tp bridges communicate only tiny antiferromagnetic interactions.     

An efficient and solvent-free one-pot synthesis of dihydropyrimidinones under microwave irradiation

An efficient synthesis of 3,4-dihydropyrimidin-2(1H)-one derivatives using formic acid as catalyst, from aldehydes,β-ketoester and urea(thiourea) without solvent under the irradiation of microwave is described. Compared with the classical Biginelli reaction, this new method has the advantage of good yields (77-94% for aromatic aldehydes) and short reaction time (3-8 min).     

Synthesis, crystal structure and magnetic property of the novel dinuclear nickel(II) complex with 4-(p-methoxyphenyl)-3,5-bis(pyridine-2-yl)-1,2,4-triazole

A novel dinuclear nickel(II) complex, [Ni₂(MOBPT)₂Cl₂(H₂O)₂]Cl₂ · 7H₂O (MOBPT = 4-(p-methoxyphenyl) −3,5-bis(pyridine-2-yl)-1,2,4-triazole), has been synthesized and characterized by elemental analysis, IR and single crystal X-ray diffraction methods. The crystal structure determination shows that the dinuclear Ni₂N₈ unit is almost planer in which each Ni^II ion is coordinated by four nitrogen atoms from MOBPT equatorially and a water molecule and a chloride ion axially in a distorted octahedral geometry. Magnetic measurements reveal a relatively weak antiferromagnetic exchange in the complex.     

Synthesis and crystal structure of an imidazolate-bridged dicopper tris(2-aminoethyl)amine complex

The [Cu(tren)(Im)Cu(tren)](ClO4)3·MeCN complex [tren=tris(2-aminoethyl)amine; Im=imidazolate anion] has been synthesized and characterized spectrally. The X-ray crystal structure analysis reveals that the imidazolate anion serves as a bridge to form a noncentrosymmetric dimeric structure in the complex. The co-ordination geometry about each copper(II) ion is a distorted trigonal bipyramid with three primary amine groups of the tren ligand forming the equatorial plane. The tertiary amine group and the imidazolate anion are in the axial positions. This revised version was published online in June 2006 with corrections to the Cover Date.     

Photocatalyzed [2 + 2 + 2]-cycloaddition of nitriles with acetylene: an effective method for the synthesis of 2-pyridines under mild conditions

The photocatalyzed [2 + 2 + 2]-cycloaddition of nitriles with 2 equiv of acetylene to 2-pyridines can be carried out under mild conditions and represents a valuable extension to common synthetical methods. For the ideal wavelength range (350-500 nm), lamps as well as sunlight can be used. Working at room temperature and in organic solvents such as toluene or hexane as well as in water gives satisfying results in many cases. However, it is also possible to vary the solvent and the reaction temperature of the photocatalyzed synthesis and to choose, with respect to the specific substrate, specific requirements for this particular reaction and general requirements of the method. This simple and selective method derives its potential mainly from the large variety of applicable nitriles. Suitable substrates include (functionalized) aliphatic and aromatic nitriles as well as cyanamides derived from secondary amines.     

Study of a fluorescence quenching mechanism of enoxacin and its determination in human serum and urine samples

The maximum emission wavelength of dopamine is 317 nm with excitation at 290 nm. The relative fluorescence intensity of dopamine decreased in the presence of enoxacin, which showed that fluorescence quenching occurred. The Stern-Volmer (S-V) plot showed a nonlinear relationship between the relative fluorescence intensity of dopamine and the concentration of enoxain. The quenching mechanism was studied and the results suggested that both dynamic and static quenching processes were responsible for the observed positive deviation in the S-V plot. When the S-V plot was modified by logarithm, the linear relationship was obtained between logF ₀/F and C in the range of 0.10 to 13.0 μg/mL (where F ₀ is the relative fluorescence intensity of dopamine, F is the relative fluorescence intensity of dopamine in the presence of enoxacin, and C is the concentration of enoxacin). The fluorescence quenching method for the determination of enoxacin was developed. The linear regression equation of the calibration graph of enoxacin was C = 13.70 (logF ₀/F) − 0.5836, with the correlation coefficient 0.9984. The detection limit was 2.0 ng/mL and the relative standard deviation was 2.52%. The effects of pH, the stability of dopamine in the presence of enoxacin, and foreign ions on the determination of enoxacin have been examined. The recovery of enoxacin was from 94.9 to 103.0% in a human serum sample and from 94.9 to 108.0% in a urine sample. The method is simple, rapid, and can be used for the determination of enoxacin in human serum and urine samples with satisfactory results. The text was submitted by the authors in English.     

吸附溶出伏安法测定水中痕量镉

报道了测定痕量镉的一种新方法．在０．０１ｍｏｌ／ＬＨＡｃ－０．０１ｍｏｌ／ＬＮａＡｃ－１．２×１０－５ｍｏｌ／Ｌ乙醛酸缩氨基硫脲（ＧＡＴＳＣ）体系中，Ｃｄ－ＧＡＴＳＣ产生一灵敏的吸附还原波，波的峰电位是－０．４３Ｖ（ｖｓ·ＳＣＥ），峰电流与镉的浓度在１．０×１０－８～８．０×１０－７ｍｏｌ／Ｌ范围内成直线关系．此法用于测定水中痕量镉，结果令人满意。     

导电聚苯胺/钙基膨润土复合材料的制备

采用插层聚合法制备了导电聚苯胺/钙基膨润土、聚苯胺/有机化膨润土复合材料.以电导率为考核指标,通过正交设计优化了苯胺的加入量、反应温度和反应时间等参数.结果表明,苯胺的加入量影响较显著,反应温度对聚苯胺/有机化膨润土复合材料影响较聚苯胺/钙基膨润土体系明显,反应时间的延长,有利于聚苯胺/有机化膨润土复合材料电导率的提高.聚苯胺/钙基膨润土复合材料制备的最佳工艺条件为:苯胺加入量为70%,反应温度为0℃,反应时间为6 h;聚苯胺/有机化膨润土复合材料制备的最佳工艺条件为:苯胺加入量为70%,反应温度为室温,反应时间为8 h.利用红外光谱(FT-IR)、X射线衍射(XRD)和四探针技术表征了材料的组成、结构和性能.结果表明:膨润土经有机化后,晶面间距增大较多;苯胺单体与钙基膨润土插层聚合后,膨润土晶面间距增大不多;苯胺单体与有机化膨润土复合后,破坏了膨润土的晶格结构,形成了混杂复合体系,电导率达10-3S.cm-1.     

Dually responsive multiblock copolymers via RAFT polymerization: Synthesis of temperature- and redox-responsive copolymers of PNIPAM and PDMAEMA

We report synthesis of temperature- and redox-responsive multiblock copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization. Well-defined α,ω-bis(dithioester)-functionalized poly(N-isopropylacrylamide) (PNIPAM) and poly(2-(dimethylamino) ethyl methacrylate) (PDMAEMA) were prepared using 1,4-bis(thiobenzoylthiomethyl)benzene and 1,4-bis(2-(thiobenzoylthio)prop-2-yl)benzene as RAFT agents, respectively. Dually responsive multiblock copolymers were synthesized in a single aminolysis/oxidation step from the α,ω-bis(dithioester)-terminated PNIPAM and PDMAEMA. The copolymers and their stimulus-responsive behavior were characterized by size exclusion chromatography, NMR, light scattering and atomic force microscopy. Due to the presence of redox-sensitive disulfide bonds between the blocks, the copolymers were readily reduced to the starting polymer blocks. The presence of temperature-responsive PNIPAM blocks provided the copolymers with the ability to assemble into core-shell nanostructures with hydrophobic PNIPAM as a core and cationic PDMAEMA as stabilizing shell when above the phase transition temperatures of PNIPAM. The temperature-induced assembly of the copolymers also showed substantial pH sensitivity. The phase transition temperature increased with decreasing pH, while molecular weight of the assemblies decreased.