三臂支化PLLA-PDLA嵌段共聚物的合成及立构复合结晶行为

以三羟甲基乙烷为起始剂, 开环聚合L-丙交酯(LLA), 合成三臂支化左旋聚乳酸(PLLA)预聚物. 采用端基活化技术对预聚物进行端羟基活化, 再与D-丙交酯(DLA)进行开环聚合, 合成了不同分子量的三臂支化左旋聚乳酸-右旋聚乳酸(PLLA-PDLA)嵌段共聚物. 采用核磁共振谱和凝胶渗透色谱等对样品的结构和分子量进行测试, 结果表明,合成的嵌段共聚物链结构具有链段立构规整度和高分子量的特点; 通过调节DLA单体与PLLA预聚物的投料比, 可实现对PLLA-PDLA嵌段共聚物的序列结构调控. 差示扫描量热仪和广角X 射线衍射结果表明, 三臂支化PLLA-PDLA嵌段共聚物的异构体分子间生成立构复合晶体, 其熔点高于200℃; 共聚物的嵌段序列结构对材料的凝聚态转变行为有很大的影响.     

Temperature Effects of Piezoresistance Coefficient

A higher sensitivity is achieved by making use of a high electron mobility transistor （HEMT） as the piezoresistive device. The temperature dependence on the electromechanical coupling effect of accelerometers is reported. The current in the structure of our study decreases at the rate of 3.15 mA/℃ with the temperature going up at every region, and piezoresistance coefficient decreases because of the shift of energy and expansion of lattice.     

一种镉基金属有机骨架材料对丙酮和Fe3+的荧光检测

以1,3,5-三（4-羧基苯基）苯（H₃BTB）为配体,通过溶剂热法得到一种三维四重穿插结构的镉基金属有机骨架材料：（Me₂NH₂）[Cd（BTB）（DMF）]·DMF·H₂O（Cd-MOF）。通过单晶X射线衍射、粉末X射线衍射、红外分析、元素分析和热重分析表征了其组成和结构。荧光研究结果表明：Cd-MOF在含有丙酮或Fe³⁺离子的溶液中均表现出荧光猝灭现象,其检测限（体积分数和浓度）分别为0.6%和0.89 μmol·L^-1,线性检测范围分别为2.0%~2.8%和0~0.05 mmol·L^-1。时间响应实验和可循环利用实验显示Cd-MOF可长时间、稳定且高效地检测丙酮和Fe³⁺离子。     

大白菜、甘蓝和西兰花中锐劲特残留量气相色谱分析方法的研究

建立了大白菜、甘蓝和西兰花3种蔬菜中的锐劲特残留量分析方法。以乙腈为提取溶剂,使用弗罗里硅土SPE小柱净化,最后利用GC-ECD进行检测,仪器最小检测量为5×10-13g,最低检出浓度为0.0005 mg/kg。在大白菜中平均回收率为85.11%~89.81%,RSD为3.8%~6.8%;甘蓝中平均回收率为91.39%~102.92%,RSD为5.2%~8.3%;西兰花中平均回收率达到91.92%~101.64%,RSD为4.5%~6.8%。     

Determination of intrinsic viscosity-molecular weight relationship for cellulose in BmimAc/DMSO solutions

For simply and accurately determining molecular weight of cellulose, an ionic liquid mixed with a co-solvent, 1-butyl-3-methylimidazolium acetate/dimethyl sulfoxide (BmimAc/DMSO) (1:1, w/w) was used and dissolved cellulose well at ambient temperature. During the dissolution process no degradation of cellulose was observed, and all the resultant cellulose/BmimAc/DMSO solutions were transparent and stable. These advantages make it as an ideal solvent system to build a new characteristic method of cellulose’s molecular weight by the measurement of the intrinsic viscosity [η], which is significantly better than the currently used solvent systems. [η] of solutions of nine cellulose samples was measured by using rheometer with cylinder fixture and Ubbelohde viscometer, respectively. The [η] values obtained by these two methods were well consistent. The degree of polymerization (DP) of these cellulose samples was determined by Copper (II) ethylenediamine method. Then the molecular weight and its distribution of representative samples were cross-checked by gel permeation chromatography for soluble derivatives of cellulose. As a result, a relationship DP = 134 [η]^1.2 was built, suitable for DPs in the range of 220–1400. The uncertainty of this relationship was estimated to be 5 %. This work provided a simple, accurate and reliable method for determining [η] and the molecular weight of cellulose.     

Electron-Transfer Protocol for the Hydroxyalkenylation of Alkenes Using 1,2-Bis(phenylsulfonyl)ethylene

We report a protocol for alkene hydroxyalkenylation. Using a persulfate anion as a one-electron-oxidation reagent and 1,2-bis(phenylsulfonyl)ethylene as a radical acceptor in the presence of water, alkenes were converted into the corresponding 1-phenylsulfonyl-4-hydroxyalkenes in good to high yields. The hydroxyalkenylation process involves the nucleophilic hydroxylation of alkene radical cations to give β-hydroxyalkyl radicals, which, after a radical addition/β-elimination sequence, provide the products. We also report a photocatalytic protocol for alkoxyalkenylation.     

纳米TiN粉体氧化制备铱钛氧化物为中间层的钛基氧化铱电极

以纳米TiN粉体和氯铱酸的混合液为涂液,采用浸渍-热分解法制备了含IrOx-TiO2中间层的钛基氧化铱电极.利用扫描电镜、X射线能谱和X射线衍射技术并结合电化学方法考察了中间层的组成和焙烧温度对电极的电催化性能和使用寿命的影响.结果表明,IrOx-TiO2中间层的加入没有改变传统的钛基氧化铱电极的形貌特征和组成,并使电极具有相同的电催化响应特性,同时大大提高了钛基氧化铱电极的使用寿命.制备钛基氧化铱电极的最优条件为焙烧温度450℃,中间层中Ir/Ti摩尔比为1.5。     

矩阵空间之间的保幂线性映射

在本文中,设C是复数域,n和m是正整数,k为固定的自然数,且k≥2．设Mm(C)为C上m阶全矩阵空间,Sn(C)为C上n阶对称矩阵空间．本文分别刻画了从Sn(C)到Mm(C)和Sn(C)到Sm(C)上的保矩阵k次幂的线性映射．     

面向谐振式微光学陀螺应用的球形谐振腔DQ乘积优化

基于谐振式光学陀螺高灵敏度、低成本与微型化的发展需求, 为了实现高灵敏度的谐振式微光机电陀螺, 提出了以集成光学微谐振腔领域里高Q值、大直径谐振腔的制作为目标, 应用方向为谐振式光学陀螺的球形光学微谐振腔核心敏感单元. 在实验中以氢火焰作为热源采用熔融法制备球形光学微谐振腔. 通过调节氢气的流量控制氢火焰热源面积, 制备了不同直径(300-2200 μm)的球形谐振腔, 分析了球形谐振腔Q 值、DQ乘积、陀螺灵敏度与谐振腔直径D的对应关系及其原因, 获得了最优参数的面向谐振式光学陀螺的球形谐振腔敏感单元. D=1260 μm时, 球腔品质因数 Q=7.18×10⁷, 得到的最优陀螺灵敏度约为10°/h, 满足商业级应用的需求, 为芯片级、高精度、低成本的新型谐振式光学微腔陀螺的研究奠定了实验基础.