Magnetic Solid-Phase Extraction and Ionic Liquid Dispersive Liquid–Liquid Microextraction Coupled with High-Performance Liquid Chromatography for the Determination of Hexachlorophene in Cosmetics

An efficient, simple, and fast method based on ionic liquid dispersive liquid–liquid microextraction (IL-DLLME) followed by magnetic solid-phase extraction (MSPE) was developed as a new technique for extracting and purifying hexachlorophene (HCP) in cosmetics prior to high-performance liquid chromatography (HPLC) determination. In this method based on IL-DLLME and MSPE, 1-hexyl-3-methylimidazolium hexafluorophosphate ([C₆MIM][PF₆]) is used as the extraction solvent and Fe₃O₄ nanoparticles are used to remove hydrophobic additives in the cosmetics by physical adsorption. The main parameters affecting the efficiency of the IL-DLLME and MSPE of HCP were investigated and optimized. Under the optimum conditions, the method was linear in the range 0.5–40 µg mL^?1 with a correlation coefficient (R ²) of 0.9976 and had a detection limit of 0.14 µg mL^?1 at a signal-to-noise ratio (S/N) of 3. The recoveries of HCP in three cosmetic samples using the proposed method were in the range 74.5–97.7%, and the relative standard deviations (RSD, n = 5) were in the range 3.8–6.7%. The developed method was successfully applied to the determination of HCP in cosmetics.     

Determination of Enantiomeric Purity of GSK962040 Based on Liquid Chromatography Using Chiral Stationary Phase Combined with a Pre-column Derivatization Procedure

A sensitive and accurate LC method was developed and further validated for the determination of enantiomeric purity of GSK962040. Before separation, a pre-column derivatization procedure was performed. Baseline separation with a resolution higher than 1.9 was accomplished within 15 min using a Chiralpak AD-H (250 × 4.6 mm; particle size 5 μm) column, with n-hexane: 2-propanol (85:15 v/v) as mobile phase at a flow rate of 1 mL min^?1. The eluted analytes were subsequently detected with a UV detector at 260 nm. The effects of mobile phase components and temperature on enantiomeric selectivity as well as resolution of enantiomers were thoroughly investigated. The calibration curves were plotted within the concentration range between 4 and 200 μg mL^?1 (n = 8), and recoveries between 98.15 and 101.48% were obtained, with relative standard deviation (RSD) lower than 1.42%. The LOD and LOQ for the Boc-GSK962040 were 1.23 and 4.15 μg mL^?1 and for its enantiomer were 1.38 and 4.76 μg mL^?1, respectively. The developed method was also evaluated and validated by analyzing bulk samples with different enantiomeric ratios of GSK962040. It was demonstrated that the method was accurate, robust and sensitive, and also had practical utilities for real analysis.     

Core-shell magnetic molecularly imprinted polymer nanoparticles for the extraction of triazophos residues from vegetables

The authors report on a surface molecular imprinting strategy for synthesizing magnetic and molecularly imprinted core-shell polymer nanoparticles (MMIPs) with a typical size of 320 nm. The triazophos-imprinted polymer shell on 180-nm magnetite particles (modified with 3-methacryloxypropyl trimethoxysilane) was obtained by radical polymerization of ethylene glycol dimethacrylate in the presence of triazophos, this followed by extractive removal of triazophos. The resulting MMIPs possess large binding capacity, high recognition selectivity, and fast binding kinetics for triazophos. They can be easily separated from a solution by using a magnet. These features result in a convenient and selective solid-phase extraction procedure for triazophos prior to its determination by UV spectrometry or by GC analysis. The method was successfully applied to the extraction and clean-up of triazophos residues in spiked homogenates of vegetables with recoveries in the range of 89.2 ~ 99.0%. The detection limits for triazophos by the UV assay and GC assay are 0.93 nM and 0.32 nM, respectively.

Open image in new window

Graphical abstract The core-shell magnetic molecularly imprinted polymer nanoparticles (MMIPs) with a nanoscale triazophos-imprinted polymer shell were prepared by surface imprinting onto the surfaces of 3-methacryloxypropyl trimethoxysilane (MATS) modified Fe₃O₄ magnetic nanoparticles. They were successfully applied for the extraction and clean-up of ultra trace triazophos residues in spiked homogenates of vegetable samples. MMIPs exhibit the larger binding capacity, faster binding kinetics, higher recognition selectivity, good reusability and stability, and excellent magnetic responses.

     

DBSA-catalyzed hydrolysis of chain α-oxo ketene dithioacetals in water: Aqueous synthesis of β-ketothioesters

In this paper, we wish to report an environment friendly synthetic method for β-ketothioesters from a dodecylbenzenesulfonic acid (DBSA)-catalyzed hydrolysis reaction of chain α-oxo ketene dithioacetals in water. It was shown that the hydrolysis reaction of chain α-oxo ketene dithioacetals could efficiently occur in the presence of 7.5?mol% DBSA at 100?°C in water, affording the desired β-keto thioesters in excellent yields.     

New biphenantherene and nervogenic acid derivatives from Liparis regnieri Finet and their inhibitory activities against NF-κB activation

A phytochemical investigation of the whole plant of Liparis regnieri Finet led to the isolation of one new biphenantherene (1) and ten new nervogenic acid derivatives (2–11), together with nine known compounds. Their structures were elucidated mainly by extensive analyses of 1D and 2D NMR spectroscopic data and chemical reactions. Additionally, for the first time a previously unreported biphenantherene was discovered to effectively suppress TNF-α induced expression of NF-κB-Luc in Hela cells with the IC₅₀ value of 1.80 μM and the structure-activity relationshipwas also discussed.     

Hydrogen evolution assisted deposition of a three-dimensional porous nickel film for the electrocatalytic oxidation of histamine

Microchimica Acta - The authors describe an electrochemical sensor for ultrasensitive voltammetric of histamine (HA) by using a gold electrode that was modified with a film consisting of...     

Double Michael addition of nitromethane to divinyl ketones: A remarkably positive effect of additive

An efficient double Michael addition of nitromethane to divinyl ketones was established in good to high yields (75–99%). A wide range of cyclohexanones were obtained with excellent diastereocontrol (up to >20:1 dr) and enantioinduction (91–99% ee) in a one-pot fashion. The involvement of basic additive significantly enhanced the reactivity of this cascade sequence.     

Acid-mediated domino reaction of ortho-carbonylated alkynyl-substituted arylaldehydes with phenols: Rapid access to fused indeno[2,1-c]chromen-7-one derivatives

Acid-mediated domino reaction of ortho-carbonylated alkynyl-substituted arylaldehydes with phenols is described. The implement of this reaction can provide directly a variety of tetracyclic indeno[2,1-c]chromen-7-one products in good yields. The mechanism was proposed to be a domino indanone ring formation/ortho-alkylation of phenols/dehydrated cyclization for the formation of polycyclic skeleton. In addition, several interesting dimeric products containing a pentacyclic scaffold were also afforded stereoselectively albeit in moderate yields. The present transformations feature the use of simple acid catalyst, short reaction time and good substrate scope.     

Probing the interfacial interaction between monolayer molybdenum disulfide and Au nanoclusters

Coupling of plasmonic metal nanostructures on two‐dimensional materials represents one promising approach to improve their optoelectronic device performance. In this article, we systematically investigated the interfacial interactions between Au nanoclusters and monolayer molybdenum disulfide (MoS₂) and the effect of Au decoration on the electrical transport and optical properties of MoS₂, through the combination of in situ MoS₂ field‐effect transistor device evaluation and in situ ultraviolet photoelectron spectroscopy and X‐ray photoelectron spectroscopy measurements. The in situ X‐ray photoelectron spectroscopy/ultraviolet photoelectron spectroscopy experiments revealed a weak interfacial coupling between Au nanoclusters and monolayer MoS₂. The absence of strong charge transfer between Au nanoclusters and MoS₂ was further confirmed by the photoluminescence and Raman measurements. It was also found that the electron charge‐carrier concentration in monolayer MoS₂ weakly depended on the coverage of Au nanoclusters. Copyright © 2017 John Wiley & Sons, Ltd.     

无粘结剂ZSM-11催化剂上异丁烯直接胺化生成叔丁胺

叔丁胺是一种重要的化工原料和中间体,广泛应用于制备橡胶促进剂、医药、农药和着色剂等下游产品.异丁烯在分子筛催化剂上直接胺化生产叔丁胺是一个经济环保过程,其中ZSM-5和BEA分子筛的催化性能优于其它系列分子筛.ZSM-11与ZSM-5分子筛具有相似的孔道结构,我们以前的实验结果表明,与ZSM-5相比,ZSM-11表现出更优越的芳构化反应性能,在干气中乙烯低温芳构化方面也有明显优势.在此基础上,我们进行无粘结剂ZSM-11分子筛催化剂合成,并应用于异丁烯直接胺化生产叔丁胺反应.传统水热技术合成的分子筛通常为粉末,机械强度不能达到实际应用的要求,在工业化过程中分子筛粉末一般需要加入粘结剂成型使其具备一定的机械强度和形状,但是粘结剂会降低分子筛催化剂的活性和选择性,有可能会引发一些副反应,因此无粘结剂分子筛催化剂引起人们广泛关注.无粘结剂分子筛是指分子筛颗粒中不含惰性粘结剂或只含有少量粘结剂,主要依靠分子筛晶粒间的相互作用支撑存在,具有一定形状、尺寸和机械强度的催化材料.无粘结剂分子筛催化剂中分子筛含量较高,可利用的有效表面积较大,在离子交换及工业催化等方面具有明显优势.本文采用水热合成的ZSM-11分子筛原粉与二氧化硅机械混合(ZSM-11/SiO2=70/30)挤条后,通过气固相合成法制备了无粘结剂ZSM-11分子筛催化剂(Cat-C).作为对比,还分别制备了ZSM-11和SiO2机械混合(ZSM-11/SiO2=70/30)样品HZSM-11+SiO2及ZSM-11和氧化铝机械混合(ZSM-11/Al2O3=70/30)样品HZSM-11+Al2O3.利用X射线衍射、透射电镜、NH3程序升温脱附和吸附吡啶红外光谱等对分子筛催化剂的物理化学性能进行了表征.同时,以这些分子筛样品为催化剂,在固定床反应装置上进行了异丁烯胺化反应评价,反应条件为270℃,5.0 MPa,氨烯比为4和异丁烯空速0.5 h?1.结果表明,与HZSM-11+SiO2和HZSM-11+Al2O3相比,Cat-C上叔丁胺生成速率最高.关联催化剂物化性能和反应性能发现,催化剂孔道结构与叔丁胺生成并不存在明显的关联性,而较多的Br?nsted酸和较少的Lewis酸才是Cat-C具有良好反应性能的主要原因.具有一定机械强度的无粘结剂ZSM-11分子筛催化剂制备简单,在异丁烯直接胺化过程中叔丁胺生成速率高,具有很好的工业化应用前景.