MgO在Mg-hBN体系中对合成cBN晶体的影响

 以金属镁粉为触媒，以六角氮化硼为原料，其中加入适量比例的氧化镁，在国产六面顶压机上，在约5.0 GPa压力、1 500～1 800 K温度条件下，合成出了颜色均匀、晶形完整的黄色立方氮化硼单晶体。实验结果表明，在Mg-hBN体系中，氧化镁对合成cBN晶体的颜色及合成温度有很大的影响。     

陆地棉体细胞胚胎的发生和遗传转化条件初探

以陆地棉（冀棉20）下胚轴为外植体，在含KT0．3mg／L和2，4－D0．08mg／L的MS培养基上，诱导产生了胚性愈伤组织，继代培养不需要添加激素，胚性愈伤组织即分化为胚状体，并萌发出小芽，胚状体萌发过程与合子胚相似，但出现了一些畸形胚，解剖学方法观察发现，这些畸形胚的维管束系统不明显或形态异常，以农杆菌介导法对冀棉20胚状体及胚性愈伤组织进行了雪花莲凝集素（GNA）基因的遗传转化条件探索，并以GUS基域瞬间进行检测加以证实，得出农杆菌的浓度为O．D600＝0．8时，浸染时间为5min，共培养时间为3d，筛选培养基中卡那霉素浓度为75mg／L，对冀棉20胚状体及胚性愈伤组织转化是较为适合的。     

独立不同分布随机变盆序列的部分和的增量有多小

关于独立同分布随机变量部分和的增量有多小问题，目前已有了著名的结果.本文通过与独立同分布情形时完全不同的途径，讨论了独立不同分布情形时相应的问题.在矩母函数存在的条件下，获得了与同分布情形相近的结论.     

界面反射偏振象差分析

在光学没计中,一般认为在同一光波面上,光束具有相同的振幅和偏振状态。事实上,光束经过许多光学元件后,偏振状态会发生变化,特别是入射角和光程的不同,会导致出射光波面上偏振分布不再均匀,形成偏振象差。本文主要就轴上物点发出的光束经过界面反射后的偏振象差方面进行了分析。     

Two differential equation systems for equality-constrained optimization

This paper presents two differential systems, involving first and second order derivatives of problem functions, respectively, for solving equality-constrained optimization problems. Local minimizers to the optimization problems are proved to be asymptotically stable equilibrium points of the two differential systems. First, the Euler discrete schemes with constant stepsizes for the two differential systems are presented and their convergence theorems are demonstrated. Second, we construct algorithms in which directions are computed by these two systems and the stepsizes are generated by Armijo line search to solve the original equality-constrained optimization problem. The constructed algorithms and the Runge–Kutta method are employed to solve the Euler discrete schemes and the differential equation systems, respectively. We prove that the discrete scheme based on the differential equation system with the second order information has the locally quadratic convergence rate under the local Lipschitz condition. The numerical results given here show that Runge–Kutta method has better stability and higher precision and the numerical method based on the differential equation system with the second information is faster than the other one.     

局部对称共形平坦黎曼流形中的极小子流形

对局部对称共形平坦黎曼流形中具有平坦法丛的极小子流形作了一些讨论，得到了极小子流形是全测地的两个充分条件。     

Synthesis,characterization, and micellization of an epoxy‐based amphiphilic diblock copolymer of ϵ‐caprolactone and glycidyl methacrylate by enzymatic ring‐opening polymerization and atom transfer radical polymerization

Amphiphilic diblock copolymer polycaprolactone‐block‐poly(glycidyl methacrylate) (PCL‐b‐PGMA) was synthesized via enzymatic ring‐opening polymerization (eROP) and atom transfer radical polymerization (ATRP). Methanol first initiated eROP of ?‐caprolactone (?‐CL) in the presence of biocatalyst Novozyme‐435 under anhydrous conditions. The resulting monohydroxyl‐terminated polycaprolactone (PCL–OH) was subsequently converted to a bromine‐ended macroinitiator (PCL–Br) for ATRP by esterification with α‐bromopropionyl bromide. PCL‐b‐PGMA diblock copolymers were synthesized in a subsequent ATRP of glycidyl methacrylate (GMA). A kinetic analysis of ATRP indicated a living/controlled radical process. The macromolecular structures were characterized for PCL–OH, PCL–Br, and the block copolymers by means of nuclear magnetic resonance, gel permeation chromatography, and infrared spectroscopy. Differential scanning calorimetry and wide‐angle X‐ray diffraction analyses indicated that the copolymer composition (?‐CL/GMA) had a great influence on the thermal properties. The well‐defined, amphiphilic diblock copolymer PCL‐b‐PGMA self‐assembled into nanoscale micelles in aqueous solutions, as investigated by dynamic light scattering and transmission electron microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5037–5049, 2007     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007     

热等离子体裂解天然气制备C2烃

采用氮气热等离子体来裂解天然气制备乙炔乙烯,着重研究了天然气转化率和乙炔、乙烯收率随氮气流量和天然气流量的变化.结果表明,天然气流量与氮气流量之比为11时,可得到较好的结果.当等离子体功率为15kW、天然气流量为3Nm3*h-1、氮气流量为3Nm3*h-1时得到最好的结果.这时天然气转化率为57%,乙炔、乙烯的收率分别为34%和9%;乙炔在反应气中的体积浓度为7.5%,与部分氧化法相似;扣除不参加反应的氮气,乙炔在气相产品中的体积浓度为13.2%,与热力学平衡计算结果基本符合.