Fabrication of uniform porous alumina materials by radio frequency (RF) magnetron sputtering

Fabrication of porous materials with uniform pore size distribution remains a challenge. In this paper, a kind of uniform porous alumina material was fabricated on a template of polystyrene microspheres by radio frequency (RF) magnetron sputtering. Surface of samples was observed by scanning electron microscopy (SEM), and the phase of porous materials was confirmed by X-ray diffraction (XRD). The pore size distribution of samples was tested by mercury intrusion method.     

Radiation Vulcanization of Magnetorheological Elastomers Based on Silicone Rubber

The fabrication of magnetorheological （MR） elastomers was studied by two vulcanization methods, including heat vulcanization （HV） and radiation vulcanization （RV）, were employed to fabricate MRE samples. The dynamical mechanical properties were characterized by using a dynamic mechanic analyzer. In particular, both the MR effect and its durability were investigated. The experimental results showed that RV samples have large magnetoinduced modulus, large zero-field modulus, and good durability property of MR effect. To explain these results, cubic deformation and plasticizer migration were analyzed. Large magneto-induced modulus of RV sample results from cubic deformation during vulcanization process. And the plasticizer migration results in better durability of MR effect.     

Structural and optical properties of pulsed laser deposited SrBi2Nb2O9 thin films

SrBi₂Nb₂O₉ (SBN) thin films were prepared on fused quartz substrates at room temperature by pulsed laser deposition. The influence of deposition parameters such as target-to-substrate distance, oxygen pressure and annealing temperature on film crystallization behavior was investigated by X-ray diffraction. Results indicated that the films grown at the optimum processing conditions have polycrystalline structure with a single layered perovskite phase. The optical transmittance of the films prepared at various oxygen pressures was measured in the wavelength range 200–900 nm using UV–vis spectrophotometer. The results showed that there is a red shift in the optical absorption edge with a rise in the oxygen pressure. Refractive index as a function of wavelength and optical band gap of the films were determined from the optical transmittance spectra. The results indicated that the refractive index increases with increasing oxygen pressure at the same incident light wavelength, while the band gap reduces from 4.13 to 3.88 eV. It may be attributed to an increase in packing density and grain size, and decrease in oxygen defects.     

A statistical learning strategy for closed-loop control of fluid flows

This work discusses a closed-loop control strategy for complex systems utilizing scarce and streaming data. A discrete embedding space is first built using hash functions applied to the sensor measurements from which a Markov process model is derived, approximating the complex system’s dynamics. A control strategy is then learned using reinforcement learning once rewards relevant with respect to the control objective are identified. This method is designed for experimental configurations, requiring no computations nor prior knowledge of the system, and enjoys intrinsic robustness. It is illustrated on two systems: the control of the transitions of a Lorenz’63 dynamical system, and the control of the drag of a cylinder flow. The method is shown to perform well.     

Blockcopolymers in microemulsions differential heats of solution and shift of the percolation temperature in W/O microemulsions

Solutions of blockcopolymers (POE-b-PI-b-POE) in fluids of interacting aqueous nanodroplets (W/O microemulsions) are studied. The interaction strength between the (pseudo) two components is measured by the shift of the percolation temperature relative to that of the pure microemulsion. A quantitative measure of the interaction, the differential heat of solution, is thermodynamically related to the slopes of the equilibrium temperature of the system with varying monomeric nanodroplet concentration and the experimental percolation line in the presence of copolymer.     

应用角谱方法研究聚焦声束在层状生物组织中的非线性声传播

应用角谱方法理论研究了聚焦声束在层状生物组织中的非线性传播特性，将声波分解为角谱，可计算垂直于声轴的任意平面的非线性声场。在圆形平面活塞聚焦换能器的焦区中插入多种生物组织样品，数值计算了样品内部及外部的二次谐波声场，并通过实验测量验证了理论方法的有效性。基于快速傅氏变换的角谱方法可直观地描述非线性声传播，对非线性声成像有指导作用。     

Discrimination of cyclic peptide diastereomers by electrospray ionization tandem mass spectrometry

In this research, the characteristic ions' abundance ratio between two isomers A and B in MS/MS mass spectra was defined as a parameter for discriminating diastereomers. Through this ratio, the discrimination of four pairs of cyclic peptide (CP) diastereomers was successfully achieved. Furthermore, in the analysis of diastereomers' mixtures, both calibration curve and calculational methods were substantiated to have high precision and accuracy. The average absolute errors of the two methods were 2.0 and 2.5% in the 48 measurements of 16 samples, respectively. This research provided a promising approach for the analysis of the CP diastereomers in the fields of asymmetrical synthesis, chiral natural products and structural biology by ESI‐MS/MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Kinetic calculation for the reaction of H with Si2H6 using the variational transition state theory

The reaction of disilane with atomic hydrogen has been studied. This reaction involves both substitution and abstraction. Calculations show that the hydrogen abstraction is the strongest competing channel. The canonical variational transition state theory with a small curvature tunneling correction (SCT) has been used for the kinetic calculation. The theoretical results are in good agreement with the available experimental data. Comparing the reactions of atomic hydrogen with disilane and silane, it can be seen that the reactivity of the Si-H bond is higher in Si₂H₆ than that in SiH₄.     

软X射线条纹相机用于激光等离子体辐射温度的测量方法

本文提出了软X射线条纹相机与吸收膜相耦合测量等离子体温度的实验原理与方法,编制了数值计算程序SCC,给出了平面金靶在1.06μm激光(LF—II~=激光装置)作用下,靶面功率密度约10~(14)W/cm~2的辐射温度。并对温度处理中存在的误差,以及把此方法推广到能谱的时间分辨和温度的空间分辨测量中的可能性进行了讨论。