Ethylene polymerization by novel Ziegler–Natta‐type catalysts obtained in situ by the oxidative addition of 8‐hydroxyquinoline‐based ligands to bis(1,5‐cyclooctadiene)nickel(0) and methylaluminoxane

Novel catalytic systems, prepared in situ by the oxidative addition of 8‐hydroxyquinoline ligands to bis(1,5‐cyclooctadiene)nickel(0) and activated by methylaluminoxane, were studied in ethylene polymerization. When 8‐hydroxyquinoline was employed, only oligomeric products were obtained. On the contrary, 5,7‐dinitro‐8‐hydroxyquinoline gave linear polyethylene (PE), but with a modest activity. For the catalyst based on 5‐nitro‐8‐hydroxyquinoline, the productivity was largely dependent on the content of free trimethylaluminum (TMA) present in the commercial aluminoxane. The progressive optimization of the TMA/oligomeric methylaluminoxane ratio increased the productivity, which reached 700 kg of PE/(mol of Ni × h), by an order of magnitude. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 200–206, 2006     

A three-phase single sheet tester with digital control of flux loci based on the contraction mapping principle

Tight control of flux loci in 2D testing of soft magnetic laminations is realized by a method based on the principle of contraction mapping. It is implemented through digital control of the currents supplying a three-phase yoke magnetizer and the use of circular samples. Faithful realization of the prescribed loci and good measuring accuracy are demonstrated in grain-oriented and non-oriented Fe–Si laminations.     

An alternative for moduli stabilisation

The one-loop vacuum energy is explicitly computed for a class of perturbative string vacua where supersymmetry is spontaneously broken by a T-duality invariant asymmetric Scherk–Schwarz deformation. The low-lying spectrum is tachyon-free for any value of the compactification radii and thus no Hagedorn-like phase-transition takes place. Indeed, the induced effective potential is free of divergence, and has a global anti-de Sitter minimum where geometric moduli are naturally stabilised.     

Are there more than five linearly-independent collision invariants for the Boltzmann equation?

The problem of finding the summational collision invariants for the Boltzmann equation is tackled with the aim of proving that the most general solution of the problem is not different from the standard one even when the equation defining a collision invariant is only satisfied almost everywhere inR ³×R ³×S ². The collision invariant is assumed to be in the Hilbert spaceH of the functions which are square integrable with respect to a Maxwellian weight.     

Hardware components wastes pyrolysis: energy recovery and liquid fraction valorisation

Pyrolysis of hardware components wastes consisting mainly in computers and television components was performed under nitrogen. The degradation products were separated in three fractions, solid, liquid and gaseous. Analyses of the three phases were carried out using gas chromatography (GC), mass spectrometry (MS), thermal analysis and infrared spectroscopy. The energetic content of the gas phase and the economic value of the liquid phase were also determined. The gas fraction produced was rich in light hydrocarbons and hydrogen. Consequently, its calorific value was high and widely sufficient to make the pyrolysis process self-sustained. The main products of the liquid phase were phenol and isopropylphenol (ca. 50–80 wt.%). The presence of Br-based compounds, deriving from the flame retardant employed in hardware components, were also detected. A controlled combustion of the solid phase permitted to obtain the glass fibres unaltered, which can be recycled.     

Gas chromatographic/mass spectrometric determination of vinyl acetate levels in air

The determination of vinyl acetate at parts per 10⁹ by volume (ppbv) levels in air by gas chromatography/mass spectrometry (GC/MS) was achieved by optimizing the GC conditions and choosing specific extraction solvents that are sufficiently pure. The ideal solvent should not give rise to fragment ions at m/z 43, in order to rule out any possible interference during the monitoring of the same vinyl acetate ion. Traces of acetone and butan-2-one in solvents suitable for this GC/MS determination may also mislead the detection of vinyl acetate. A 440 μl volume of a mixture of tetrachloroethylene containing 9% acetonitrile allowed the recovery of more than 90% of the ester with a detection limit of 1.5 ppbv in air together with a good linearity of response.     

Immunological and biochemical evidence that blepharismin is not a prosthetic group

A polyclonal, multispecific antiserum was raised against a whole 3[(3-cholamidopropyl)-dimethylammonio]-1-propanesulfonate-extract of nonirradiated Blepharisma japonicum cells. It was used to reveal the composition of solutions that were hypothesized to contain the photoreceptor of the ciliate. A Bio-Gel A 1.5 m fine column chromatography of the extract allowed recovery of a single elution peak isolated by recording the 580 nm light absorbance. Fused-rocket immunoelectrophoresis of this material revealed a large number of > 300 kDa coeluted proteins. Blepharismin-rich material with a molecular mass of approximately 50 kDa, consisting of at least nine proteins was obtained when the same extract underwent preparative isoelectric focusing before column chromatography separation. Purification of the pigment obtained from light-exposed cells gave blepharismin-rich material with a molecular weight of approximately 200 kDa. Comparison of the materials obtained under the same conditions, either from the dark-kept or light-irradiated cells, by means of pore-gradient electrophoresis confirmed that proteins present in the two preparations were different. It revealed only a very small amount, if any, of proteins in the chromatography fractions with the highest absorbance at 600 nm. Results are discussed on the basis of the hypothesis that a specific blepharismin-binding protein does not exist in the protozoan.     

DFT computational study of the mechanism of allyl halides carbonylation catalyzed by nickel tetracarbonyl

A theoretical investigation at the DFT(B3LYP) level on the carbonylation reaction of allyl bromide catalyzed by nickel tetra-carbonyl Ni(CO)(4) is discussed. The computational results show the following: (i) Three main steps characterize the catalytic cycle: (a) an oxidative addition step, (b) a carbonylation step, and (c) a reductive elimination step where the acyl product is obtained and the catalyst is regenerated. (ii) Both Ni(CO)(3) and Ni(CO)(4) complexes can behave as "active" catalytic species. (iii) The oxidative addition leads to the formation of either eta(3) or eta(1)-allyl nickel complexes, which are involved in a fast equilibrium. (iv) The carbonylation occurs much more easily on the eta(1) than on the eta(3) intermediates.