Liquid chromatography–tandem mass spectrometry method for simultaneous quantification of urapidil and aripiprazole in human plasma and its application to human pharmacokinetic study

A sensitive and selective liquid chromatography–tandem mass spectrometry (LC–MS/MS) method was developed and validated for simultaneous determination of urapidil and aripiprazole in human plasma. A simple liquid–liquid extraction with ethyl acetate was used for the sample preparation. Chromatographic separation was achieved on a Phenomenex C₁₈ (4.6 × 50 mm, 5 µm) column with 0.1% formic acid–acetonitrile (10:90, v/v) as the mobile phase with flow rate of 0.6 mL/min. The quantitation of the target compounds was determined in a positive ion multiple reaction monitoring mode. Calibration plots were linear over the range of 2.0–2503.95 ng/mL for urapidil and 1.0–500.19 ng/mL for aripiprazole. The lower limit of quantitation for urapidil and aripiprazole was 2.0 and 1.0 ng/mL, respectively. Mean recovery was in the range of 69.94–75.62% for both analytes and internal standards. Intra‐day and inter‐day precisions of the assay at three concentrations were 2.56–5.89% with accuracy of 92.31–97.83% for urapidil, and 3.14–6.84% with accuracy of 91.38–94.42% for aripiprazole. The method was successfully applied to human pharmacokinetic study of urapidil and aripiprazole in healthy human male volunteers. Copyright © 2013 John Wiley & Sons, Ltd.     

Bi(NO3)3.5H2O: A Convenient Reagent for Selective Oxidation of Sulfides to Sulfoxides

Bi(NO₃)₃.5H₂O, a cheaply available, crystalline solid has been found to readily effect selective oxidation of a variety of sulfides to sulfoxides in acetic acid medium at room temperature in fair to good yields.     

Electrospun Porous NiCo2O4 Nanotubes as Advanced Electrodes for Electrochemical Capacitors

Novel, porous NiCo₂O₄ nanotubes (NCO‐NTs) are prepared by a single‐spinneret electrospinning technique followed by calcination in air. The obtained NCO‐NTs display a one‐dimensional architecture with a porous structure and hollow interiors. The effect of precursor concentration on the morphologies of the products is investigated. Due to their unique structure, the prepared NCO‐NT electrode exhibits a high specific capacitance (1647 F g^?1 at 1 A g^?1), excellent rate capability (77.3 % capacity retention at 25 A g^?1), and outstanding cycling stability (6.4 % loss after 3000 cycles), which indicates it has great potential for high‐performance electrochemical capacitors. The desirable enhanced capacitive performance of NCO‐NTs can be attributed to the relatively large specific surface area of these porous and hollow one‐dimensional nanostructures.     

Carbon‐Coated LiTi2(PO4)3: An Ideal Insertion Host for Lithium‐Ion and Sodium‐Ion Batteries

We report the extraordinary performance of carbon‐coated sodium super ion conductor (NASICON)‐type LiTi₂(PO₄)₃ as an ideal host matrix for reversible insertion of both Li and Na ions. The NASICON‐type compound was prepared by means of a Pechini‐type polymerizable complex method and was subsequently carbon coated. Several characterization techniques such as XRD, thermogravimetric analysis (TGA), field‐emission (FE) SEM, TEM, and Raman analysis were used to study the physicochemical properties. Both guest species underwent a two‐phase insertion mechanism during the charge/discharge process that was clearly evidenced from galvanostatic and cyclic voltammetric studies. Unlike that of Li (≈1.5 moles of Li), Na insertion exhibits better reversibility (≈1.59 moles of Na) while experiencing a slightly higher capacity fade (≈8 % higher than Li) and polarization (780 mV) than Li. However, excellent rate capability profiles were noted for Na insertion relative to its counterpart Li. Overall, the Na insertion properties were found to be superior relative to Li insertion, which makes carbon‐coated NASICON‐type LiTi₂(PO₄)₃ hosts attractive for the development of next‐generation batteries.     

Influence of Substitutional Defects in ZIF-8 Membranes on Reverse Osmosis Desalination: A Molecular Dynamics Study

In this study, molecular dynamics simulation is used to investigate the effects of water-based substitutional defects in zeolitic imidazolate frameworks (ZIF)-8 membranes on their reverse osmosis (RO) desalination performance. ZIF-8 unit cells containing up to three defect sites are used to construct the membranes. These substitutional defects can either be Zn defects or linker defects. The RO desalination performance of the membranes is assessed in terms of the water flux and ion rejection rate. The effects of defects on the interactions between the ZIF-8 membranes and NaCl are investigated and explained with respect to the radial distribution function (RDF) and ion density distribution. The results show that ion adsorption on the membranes occurs at either the nitrogen atoms or the defect sites. Complete NaCl rejection can be achieved by introducing defects to change the size of the pores. It has also been discovered that the presence of linker defects increases membrane hydrophilicity. Overall, molecular dynamics simulations have been used in this study to show that water-based substitutional defects in a ZIF-8 structure reduce the water flux and influence its hydrophilicity and ion adsorption performance, which is useful in predicting the type and number of defect sites per unit cell required for RO applications. Of the seven ZIF-8 structures tested, pristine ZIF-8 exhibits the best RO desalination performance.     

Electrospun CuFe2O4 nanotubes as anodes for high-performance lithium-ion batteries

Herein,we report on the synthesis and lithium storage properties of electrospun one-dimensional(1D) CuFe_2O_4 nanomaterials.1D CuFe_2O_4nanotubes and nanorods were fabricated by a single spinneret electrospinning method followed by thermal decomposition for removal of polymers from the precursor fibers.The as-prepared CuFe_2O_4 nanotubes with wall thickness of ~50 nm presented diameters of ~150 nm and lengths up to several millimeters.It was found that phase separation between the electrospun composite materials occured during the electrospinning process,while the as-spun precursor nanofibers composed of polyacrylonitrile(PAN),polyvinylpyrrolidone(PVP) and metal salts might possess a core-shell structure(PAN as the core and PVP/metal salts composite as the shell) and then transformed to a hollow structure after calcination.Moreover,as a demonstration of the functional properties of the 1D nanostructure.CuFe_2O_4 nanotubes and nanorods were investigated as anodes for lithium ion batteries(LIBs).It was demonstrated that CuFe_2O_4 nanotubes not only delivered a high reversible capacity of ~816 mAh·g~(-1) at a current density of 200 mA·g~(-1)over 50 cycles,but also showed superior rate capability with respect to counterpart nanorods.Probably,the enhanced electrochemical performance can be attributed to its high specific surface areas as well as the unique hollow structure.     

Phase transition studies in symmetric dimeric liquid crystals

As a part of the systematic studies on symmetric liquid crystal dimer homologous series, α,ω-bis-(4-n-alkylaniline benzylidene-4′-oxy) alkanes, (referred to as m.OnO.m with m = 3, 4, and 5; and n = 8, 9, and 10), we present in this article the nature of phase transitions across isotropic–nematic and nematic–smectic-A (N–SmA) phases exhibited by the just mentioned compounds. The methods employed are differential scanning calorimetry and dilatometry. The compounds studied were 3.O8O.3, 4.O8O.4, and 5.O8O.5; and 3.O9.03, 5.O9O.5, 3.O10O.3, 4.O10O.4, and 5.O10O.5. Different from the case of their corresponding monomers, all these compounds exhibit a nematic phase only with the exception of 5.O8O.5 which exhibits a SA phase in addition to the nematic phase. The phase transitions viz., isotropic–nematic transitions studied in all these compounds were confirmed to be of first-order nature, whereas the N–SmA transition exhibited by the compound 5.O8O.5 only was found to be of second-order nature. We also report in this article the calculated density jumps, thermal expansion coefficient maxima, and pressure dependence of transition temperatures which are analyzed in the light of the available literature data.     

Synthesis of 2-(N-Benzylpyrrolyl)-benzimidazoles Using Polyphosphoric Acid Prompted Cyclocondensation

Synthesis of a series of 2-substituted benzimidazoles was carried out for screening anti-inflammatory activities. 2-(N-benzylpyrrolyl)-benzimidazoles 9a-k were synthesized from N-benzyl-2-pyrrole carboxylic acids 8a-d and 4-substituted-1,2-phenylenediamines by cyclocondensation utilizing polyphosphoric acid (PPA) as condensing agent. The N-benzyl-2-pyrrole carboxylic acids were prepared by standard method of N-benzylation of 2-pyrrole carboxylate using NaH/DMF and appropriately substituted benzyl halides followed by alkaline hydrolysis.