超分子砌块间苯二酚杯芳烃的研究进展

间苯二酚杯芳烃是一类以间苯二酚为单元的杯芳烃, 作为新一代超分子砌块, 在分子催化、分子识别、超分子自组装、晶体工程和纳米材料等方面都获得了广泛的应用, 已成为当今化学研究的新热点. 综述了间苯二酚杯芳烃的功能化修饰及其应用新进展.     

吲哚环衍生物在直链淀粉柱上的拆分

选用不同的醇改性剂,在自制的直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)(ADMPC)手性固定相上,对2种吲哚环衍生物对映体进行了手性拆分研究,并考察了样品的保留时间和立体选择性.     

化学镀钴基合金镀液中钴的快速测定

研究了采用显色剂 苦胺酸偶氮变色酸对化学镀钴基合金镀液中钴含量进行测定的试验条件,在pH11的氨 氯化铵缓冲溶液中,钴与显色剂配合物的最大吸收峰在650nm波长处,钴(Ⅱ)在0～60μg/25ml范围内服从比耳定律,表观摩尔吸光系数为3.1×104L·mol-1·cm-1。该法测定钴的选择性好,在大量镍存在下,也能准确测定,对镀液样品进行了测定,相对标准偏差小于1%,结果满意。     

N-烷基壳聚糖玻璃化转变温度的研究

采用差示扫描量热(DSC)法和热释电流(TSC)法研究了N-烷基壳聚糖的玻璃化转变行为. DSC法中采用二次扫描以消除溶剂和热历史的影响, 并利用物理老化方法来增强N-烷基壳聚糖在DSC曲线上的玻璃化转变区域的热焓吸热峰, 以克服DSC法的不灵敏性. 两种研究方法的结果一致表明, 三种N-烷基壳聚糖的玻璃化转变均发生在110～150 ℃温区内；取代的柔性烷基越大, 玻璃化转变温度(Tg)越低；但N-甲基壳聚糖例外, 其Tg略高于壳聚糖, 空间阻碍在这里起决定的作用.     

(S)-3-苯基-2-氨基丙硫醇盐酸盐的合成

以L 苯丙氨酸为原料经还原反应得到氨基醇,用Boc基团进行氨基保护后得到(S) 3 苯基 2 叔丁氧羰基氨基 1 丙醇,甲磺酰化后与硫代乙酸钾在DMF中反应得到(S) 3 苯基 2 叔丁氧羰基氨基 1 丙硫醇乙酸酯,再分别脱除乙酰基,氨基保护基后得到(S) 3 苯基 2 氨基丙硫醇盐酸盐.并用元素分析、红外光谱、核磁共振等手段对中间体和目标化合物进行了表征.     

Synthesis of a Novel Core-shell Type Acrylic-polyurethane Hybrid Emulsion Containing Siloxane and Fluorine as well as Water and the Oil Resistances of Cured Film

Aqueous acrylic-polyurethane dispersions have become one of the major types of materials used in coating, paint and adhesive industries, because of excellent properties and environmental advantages1-5. However, some properties for cured film such as water…     

Z‐bpy,a New C2‐Symmetric Bipyridine Ligand and Its Application in Enantioselective Copper(I)‐Catalyzed Cyclopropanation of Olefins

A rigid C₂‐symmetric chiral bipyridine ligand Z‐bpy with a triptycene‐like backbone was designed and synthesized from simple chemicals in a scalable route. Using this new ligand, copper(I) catalyzed cyclopropanation of styrenes with commercial ethyl diazoacetate produced various corresponding cyclopropanes in high yields, diastereoselectivity and enantioselectivity up to 97% ee.     

笃斯茎中六种无机元素含量分析

应用原子吸收光谱法测定了内蒙古地产的笃斯茎、叶中的Cu,Fe,Zn,Mn,Ca,Mg等六种人体必需微量元素及宏量元素的含量。从而为评价笃斯的品质及其药理、药效提供了具有一定价值的数据。     

Multi-Step Continuous-Flow Organic Synthesis: Opportunities and Challenges

Continuous-flow multi-step synthesis takes the advantages of microchannel flow chemistry and may transform the conventional multi-step organic synthesis by using integrated synthetic systems. To realize the goal, however, innovative chemical methods and techniques are urgently required to meet the significant remaining challenges. In the past few years, by using green reactions, telescoped chemical design, and/or novel in-line separation techniques, major and rapid advancement has been made in this direction. This minireview summarizes the most recent reports (2017–2020) on continuous-flow synthesis of functional molecules. Notably, several complex active pharmaceutical ingredients (APIs) have been prepared by the continuous-flow approach. Key technologies to the successes and remaining challenges are discussed. These results exemplified the feasibility of using modern continuous-flow chemistry for complex synthetic targets, and bode well for the future development of integrated, automated artificial synthetic systems.