Chemoselective reductions of 2-acyl-1H-indole-3-carboxaldehydes

A novel procedure for the chemoselective reduction of 2-acyl-1H-indole-3-carboxaldehydes has been developed. Low temperature lithium triethylborohydride reduction affords the indol-2-yl carbinol whilst sodium cyanoborohydride reduction in acetic acid affords the 3-hydroxymethyl analogs. Both processes are high yield, and provide access to intermediates of potential utility for indole alkaloid synthesis.     

Psymberin, a potent sponge-derived cytotoxin from Psammocinia distantly related to the pederin family

[structure: see text] Bioassay-guided fractionation of the sponge Psammocinia sp. afforded psymberin (1) possessing 5S,8S,9S,11R,13R,15S,16R,17R stereochemistry. Psymberin exhibits structural similarities to the pederin family metabolites. The potent cytotoxicty and unique structural features of 1 make it a promising lead for therapeutic development.     

Single-ion magnetism in the extended solid-state: insights from X-ray absorption and emission spectroscopy

Large single-ion magnetic anisotropy is observed in lithium nitride doped with iron. The iron sites are two-coordinate, putting iron doped lithium nitride amongst a growing number of two coordinate transition metal single-ion magnets (SIMs). Uniquely, the relaxation times to magnetisation reversal are over two orders of magnitude longer in iron doped lithium nitride than other 3d-metal SIMs, and comparable with high-performance lanthanide-based SIMs. To understand the origin of these enhanced magnetic properties a detailed characterisation of electronic structure is presented. Access to dopant electronic structure calls for atomic specific techniques, hence a combination of detailed single-crystal X-ray absorption and emission spectroscopies are applied. Together K-edge, L_2,3-edge and Kβ X-ray spectroscopies probe local geometry and electronic structure, identifying iron doped lithium nitride to be a prototype, solid-state SIM, clean of stoichiometric vacancies where Fe lattice sites are geometrically equivalent. Extended X-ray absorption fine structure and angular dependent single-crystal X-ray absorption near edge spectroscopy measurements determine Fe^I dopant ions to be linearly coordinated, occupying a D_6h symmetry pocket. The dopant engages in strong 3dπ-bonding, resulting in an exceptionally short Fe–N bond length (1.873(7) Å) and rigorous linearity. It is proposed that this structure protects dopant sites from Renner–Teller vibronic coupling and pseudo Jahn–Teller distortions, enhancing magnetic properties with respect to molecular-based linear complexes. The Fe ligand field is quantified by L_2,3-edge XAS from which the energy reduction of 3d_z² due to strong 4s mixing is deduced. Quantification of magnetic anisotropy barriers in low concentration dopant sites is inhibited by many established methods, including far-infrared and neutron scattering. We deduce variable temperature L₃-edge XAS can be applied to quantify the J = 7/2 magnetic anisotropy barrier, 34.80 meV (∼280 cm⁻¹), that corresponds with Orbach relaxation via the first excited, M_J = ±5/2 doublet. The results demonstrate that dopant sites within solid-state host lattices could offer a viable alternative to rare-earth bulk magnets and high-performance SIMs, where the host matrix can be tailored to impose high symmetry and control lattice induced relaxation effects.

Taking advantage of synchrotron light source methods, we present the geometric and electronic structure of iron doped in lithium nitride.     

Slow internal dynamics in proteins: application of NMR relaxation dispersion spectroscopy to methyl groups in a cavity mutant of T4 lysozyme

Recently developed carbon transverse relaxation dispersion experiments (Skrynnikov, N. R.; et al. J. Am. Chem. Soc. 2001, 123, 4556-4566) were applied to the study of millisecond to microsecond time scale motions in a cavity mutant of T4 lysozyme (L99A) using methyl groups as probes of dynamics. Protein expressed in E. coli cells with (13)CH(3)-pyruvate as the sole carbon source contained high levels of (13)C enrichment at a total of 80 Val gamma, Leu delta, Ile gamma (2), Ala beta, and Met epsilon methyl positions with little extraneous incorporation. Data for 72 methyl groups were available for analysis. Dispersion profiles with large amplitudes were measured for many of these residues and were well fit to a two-state exchange model. The interconversion rates and populations of the states, obtained from fitting relaxation dispersion profiles of each individual probe, were remarkably homogeneous and data for nearly all methyl groups in the protein could be collectively fit to a single cooperative conformational transition. The present study demonstrates the general applicability of methyl relaxation dispersion measurements for the investigation of millisecond time scale protein motions at a large number of side-chain positions. Potential artifacts associated with the experiments are described and methods to minimize their effects presented. These experiments should be particularly well suited for probing dynamics in high molecular weight systems due to the favorable NMR spectroscopic properties of methyl groups.     

Laser induced time-dependent thermal lensing studies of vibrational relaxation: translational cooling in CH3F

Time-resolved measurements of the thermal lens effect have been made for CH₃F, CH₃CI and C₂H₄. This technique is compared to others used in the study of vibrational relaxation phenomena and is found to be applicable to the study of a wide variety of gaseous systems at relatively low pressures. Translational cooling has been observed in CH₃F and an approximate lower limit of 200 msec^-1 has been established for the rate of this cooling process, which corresponds to equilibration of the ν₃ and ν₆ states, in a mixture of 0.2 torr CH₃F and 10 torr Ar.     

Post-lactonization of vinyl polymers containing pendent ester and hydroxymethyl groups

Copolymers of methyl methacrylate with methyl and ethyl α-hydroxymethylacrylate and with α-hydroxymethylstyrene have been prepared with free-radical initiators at temperatures below 80°C. At higher reaction temperatures or under extrusion conditions, alcohol was eliminated and the free hydroxyl content was greatly decreased. All evidence indicates the formation of six-membered lactone groups in this post-polymerization reaction: direct evidence for their formation is lacking, however, since neither infrared nor nuclear magnetic resonance spectra could be used to detect lactonization in this system. The loss of activity from ¹⁴C ester-labeled methyl methacrylate copolymer on heating could be correlated with the extent of lactonization. The degree of lactonization is relatively less with copolymers containing higher amounts of hydroxymethyl groups. The resulting polymers exhibit higher heat distortion temperatures and decreased impact resistance when compared to poly(methyl methacrylate). Attempts were made to incorporate similar lactone structures by cyclocopolymerization with methyl methacrylate of α-methacryloxymethylstyrene or ethyl α-methacryloxymethylacrylate, but only crosslinked polymers or polymers with pendent unsaturation were found.     

Induced radioactivity of LDEF materials and structural components

We present an overview of the Long Duration Exposure Facility (LDEF) induced activation measurements. The LDEF, which was gravity-gradient stabilized, was exposed to the low Earth orbit (LEO) radiation environment over a 5.8 year period. Retrieved activation samples and structural components from the spacecraft were analyzed with low and ultra-low background HPGe gamma spectrometry at several national facilities. This allowed a very sensitive measurement of long-lived radionuclides produced by proton- and neutron-induced reactions in the time-dependent, non-isotropic LEO environment. A summary of major findings from this study is given that consists of directionally dependent activation, depth profiles, thermal neutron activation, and surface beryllium-7 deposition from the upper atmosphere. We also describe a database of these measurements that has been prepared for use in testing radiation environmental models and spacecraft design.     

A Product Formed from Glycylglycine in the Presence of Vanadate and Hydrogen Peroxide: The (Glycylde-N-hydroglycinato-kappa(3)N(2),N(N)(),O(1))oxoperoxovanadate(V) Anion

A crystalline glycylglycine complex of monoperoxovanadate has been obtained and its X-ray structure determined. The coordination is pentagonal bipyramidal with the peroxo group and a tridentate glycylglycine occupying the equatorial positions. The axial positions of the anion are occupied by the oxo ligand and by one oxygen of the peroxo group of the adjacent anion. The latter interaction establishes the seventh bond and produces a dimeric structure in the crystalline material. NMR studies of its dissolution in water combined with previously reported results from equilibrium measurements show that the dimer dissociates in water to the monomeric precursor. It is proposed that this monomer corresponds to the complex responsible for the inhibition of the vanadium-catalyzed decomposition of hydrogen peroxide by glycylglycine. Crystal structure of [NEt(4)][VO(O(2))(GlyGly)].1.58H(2)O: monoclinic, space group P2(1); Z = 4; a = 10.618(2) ?; b = 14.803(2) ?; c = 11.809(2) ?; beta = 101.37(2) degrees; V = 1819.7 ?(3); T = 198 K; R(F)() = 0.029 for 2664 data (I(o) >/= 2.5sigma(I(o))) and 431 variables.     

A copper-catalyzed C-N bond formation involving sp-hybridized carbons. A direct entry to chiral ynamides via N-alkynylation of amides

A copper-catalyzed new C-N bond formation involving a sp-hybridized carbon is described here leading to a facile entry for syntheses of chiral ynamides. This direct N-alkynylation of amides should have a significant impact on the future development of synthetic methodologies employing ynamides.