Photophysical studies of alpha,omega-dicyano-oligothiophenes NC(C4H2S)nCN (n = 1-6)

The photophysics of six oligothiophenes end-capped with cyano groups (CNalphan) was investigated in solution at room and low temperature. The study comprises singlet-singlet and triplet-triplet absorption and emission spectra together with lifetimes and quantum yields for all the radiative and nonradiative processes. From the lifetimes and quantum yields, it was possible to extract the rate constants for all the processes. Singlet oxygen yields were also determined, revealing an efficient sensitization (SDelta approximately 1) of its formation by the triplet state of the CNalphan. The introduction of the cyano groups is found to decrease the energetic separation between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, leading to a red shift of the absorption and the emission when compared with the unsubstituted counterparts, the alpha-oligothiophenes. Phosphorescence is only observed for the first member of the series, CNalpha1.     

Characterization of counterion and surface influence on micelle formation using tapping mode atomic force microscopy in air

Cylindrical micelles prepared in aqueous solutions from cationic surfactants octadecyl trimethylammonium (OTA+) or cetyltrimethylammonium (CTA+) and parachlorobenzoate (PCB) counterion were successfully imaged after evaporation of water using tapping mode atomic force microscopy (TM-AFM) onto very smooth gold and glass substrates. With the help of the obtained topography AFM images, it was shown that the micellar structures are preserved on gold substrates after evaporation of the solvent despite the new set of stresses due mainly to capillary forces and dehydration. The influence of the substrate on the resulting micellar morphology observed in air was investigated for these two materials: cylindrical micelles were evidenced as loosely adherent on gold surface in the presence of parachlorobenzoate (PCB) and identical, geometrically speaking, to those known to exist in aqueous solutions. In this situation, topographic AFM images allowed us to determine accurately their geometrical characteristics such as diameter and length in the nanometer range. On the other hand, AFM images obtained in air on glass surfaces revealed micellar structures that are different from those existing in the bulk of the solution. Indeed, bilayer-type micelles with a thickness close to twice the surfactant monomer expected length were observed, indicating that the well-established and strong influence of glass on micelle geometry at the glass/solution interface is maintained after evaporation of water. These results have been analyzed on the basis of positive charge of gold deduced from electrochemical impedance spectroscopy (EIS) and Raman spectroscopy measurements on one hand and of the negative charge of glass on the other hand. Although these results appeal to new theoretical considerations dealing with dynamics of evaporation of micellar solution drops and/or with counterion contributions to macromolecular interactions in aqueous solutions and in air, this new AFM imaging method appears to be the more adequate one to image and measure the micelles formed in the presence of water.     

Polymer-nanoparticle complexes: from dilute solution to solid state

We report on the formation and the structural properties of "supermicellar" aggregates made from mineral nanoparticles and polyelectrolyte-neutral block copolymers in aqueous solutions. The mineral particles put under scrutiny are ultrafine and positively charged yttrium hydroxyacetate nanoparticles. Combining light, neutron, and X-ray scattering experiments, we have characterized the sizes and the aggregation numbers of the organic-inorganic complexes. We have found that the hybrid aggregates have typical sizes in the range of 100 nm and exhibit a remarkable colloidal stability with respect to ionic strength and concentration variations. Solid films with thicknesses up to several hundreds of micrometers were cast from solutions, resulting in a bulk polymer matrix in which nanoparticle clusters are dispersed and immobilized. It was found in addition that the structure of the complexes remains practically unchanged during film casting.     

Using high-power lasers for detection of elastic photon-photon scattering

The properties of four-wave interaction via the nonlinear quantum vacuum is investigated. The effect of the quantum vacuum is to generate photons with new frequencies and wave vectors, due to elastic photon-photon scattering. An expression for the number of generated photons is derived, and using state-of-the-art laser data it is found that the number of photons can reach detectable levels. In particular, the prospect of using the high-repetition Astra Gemini system at the Rutherford Appleton Laboratory is discussed. The problem of noise sources is reviewed, and it is found that the noise level can be reduced well below the signal level. Thus, detection of elastic photon-photon scattering may for the first time be achieved.     

Multipolar interactions in the D pocket of thrombin: large differences between tricyclic imide and lactam inhibitors

Two series of tricyclic inhibitors of the serine protease thrombin, imides (+/-)-1-(+/-)-8 and lactams (+/-)-9-(+/-)-13, were analysed to evaluate contributions of orthogonal multipolar interactions with the backbone C=O moiety of Asn98 to the free enthalpy of protein-ligand complexation. The lactam derivatives are much more potent and more selective inhibitors (K(i) values between 0.065 and 0.005 microM, selectivity for thrombin over trypsin between 361- and 1609-fold) than the imide compounds (Ki values between 0.057 and 23.7 microM, selectivity for thrombin over trypsin between 3- and 67-fold). The increase in potency and selectivity is explained by the favorable occupancy of the P-pocket of thrombin by the additional isopropyl substituent in the lactam derivatives. The nature of the substituent on the benzyl ring filling the D pocket strongly influences binding potency in the imide series, with Ki values increasing in the sequence: F < OCH2O < Cl < H < OMe < OH < N(pyr)< Br. This sequence can be explained by both steric fit and the occurrence of orthogonal multipolar interactions with the backbone C[double bond, length as m-dash]O moiety of Asn98. In contrast, the substituent on the benzyl ring hardly affects the ligand potency in the lactam series. This discrepancy was clarified by the comparison of X-ray structures solved for co-crystals of thrombin with imide and lactam ligands. Whereas the benzyl substituents in the imide inhibitors are sufficiently close (< or =3.5 Angstroms) to the C=O group of Asn98 to allow for attractive orthogonal multipolar interactions, the distances in the lactam series are too large (> or =4 Angstroms) for attractive dipolar contacts to be effective.     

The dihydrofuran template approach to furofuran synthesis

Flash vacuum pyrrolysis of vinyl epoxides provides cis-dihydrofuran carboxylic esters in good yields and diastereoselectivities, which, on base-promoted epimerisation afford the complementary trans series. The compounds provide a viable template for a Lewis acid promoted cyclisation to provide the 2,6-diaryl-3,7-dioxabicyclo[3.3.0]octane core found in the furofuran series of natural lignans. This strategy is stereodivergent and can be controlled to provide the exo-exo, exo-endo or endo-endo stereochemistries. The approach has been exemplified in syntheses of the sesamyl furofurans (+/-)-epiasarinin and (+/-)-asarinin.     

Extended tunnelling states in the benzoic acid crystal: infrared and Raman spectra of the OH and OD stretching modes

We compare Raman and infrared spectra of the nuOH/OD modes in benzoic acid crystal powders at 7 K. The extremely sharp Raman bands contrast to the broad infrared profiles and suggest adiabatic separation of hydrogen (deuterium) dynamics from the crystal lattice. There is no evidence of any proton-proton coupling term. The assignment scheme is consistent with a quasisymmetric double-minimum potential, largely temperature independent. Tunnel splitting is a major band shaping mechanism, in addition to anharmonic coupling with lattice modes. The proton/deuteron dynamics are rationalized with nonlocal pseudoparticles and extended states. We propose a symmetry-related damping mechanism to account for the broad infrared profiles, as opposed to the sharp Raman bands. We assign spectral features to distinct interconversion mechanisms based on either pseudoparticle transfer or adiabatic pairwise transfer. We establish close contacts with theoretical models based on first-principles calculations.     

Polyelectrolytes in solutions with multivalent salt. Effects of flexibility and contour length

It has been experimentally observed that trivalent ions are capable of promoting compaction of semi-flexible polyelectrolyte chains. In this work we perform Monte Carlo simulations on single chain model systems with varying chain size and stiffness and evaluate the action of multivalent salt on the chain conformation. It is observed that longer chains tend to achieve relatively more compact conformations than shorter ones, and the dimensions of the collapsed structures do not significantly vary with contour length. The influence of contour length and intrinsic stiffness in the process of ion condensation is studied by analysis of the ion-ion nearest-neighbor distribution. The general trend is an increase of the degree of ion condensation as the chain length increases, in accordance with experimental evidence. A decreased importance of end-effects and, especially, larger volume charge densities are responsible for such behavior. The influence of chain stiffness is nontrivial, and depends on salt concentration. The results emphasize the complex nature of ion-correlation phenomena in flexible or semi-flexible chains and call for the development of more sophisticated analytical theories.     

Polystyrene-graft-polyglycerol resins: a new type of high-loading hybrid support for organic synthesis

The preparation of a dendritic graft polymer by a very efficient synthesis of polyglycerol directly on a polystyrene resin is presented. This one-step process can be performed on a multigram scale to provide a chemically stable polymeric support. The resulting hybrid polymers were fully characterized by diverse analytical methods (NMR, IR, ESEM, UV detection of cleaved protecting groups, and mass-spectrometric methods). They combine a high loading capacity (up to 4.3 mmol g(-1)) with good swelling properties in a wide range of solvents (including water), which is the major drawback for many existing solid phase supports. In comparison to the widely employed PEGylated resins, these hybrid materials offer a 10-fold higher loading capacity. Their suitability as supports for organic synthesis and for the immobilization of reagents has been demonstrated. These materials also swell in water, and consequently, it should be possible to use these new hybrid materials for synthesis in protic solvents.