Phenylboronic acid functionalized SBA-15 for sugar capture

The synthesis and characterization of organic-inorganic hybrid materials that selectively capture sugars from model biomass hydrolysis mixtures are reported. 3-Aminophenylboronic acid (PBA) groups that can reversibly form cyclic esters with 1,2-diols, and 1,3-diols including sugars are attached to mesoporous SBA-15 via different synthetic protocols. In the first route, a coupling agent is used to link PBA and SBA-15, while in the second route poly(acrylic acid) brushes are first grafted from the surface of SBA-15 by surface-initiated atom transfer radical polymerization and PBA is then immobilized. The changes in pore structure, porosity, and pore size due to the loading of organic content are measured by powder X-ray diffraction and nitrogen porosimetry. The increase in organic content after each synthesis step is monitored by thermal gravimetric analysis. Fourier transform infrared spectroscopy and elemental analysis are used to characterize the chemical compositions of the hybrid materials synthesized. D-(+)-Glucose and D-(+)-xylose, being the most commonly present sugars in biomass, are chosen to evaluate the sugar adsorption capacity of the hybrid materials. It is found that the sugar adsorption capacity is determined by the loading of boronic acid groups on the hybrid materials, and the hybrid material synthesized via route two is much better than that through route one for sugar adsorption. Mathematical modeling of the adsorption data indicates that the Langmuir model best describes the sugar adsorption behavior of the hybrid material synthesized through route one, while the Freundlich model fits the data most satisfactorily for the hybrid material prepared via route two. The adsorption kinetics, reusability, and selectivity toward some typical chemicals in cellulose acidic hydrolysis mixtures are also investigated.     

Ionic liquids for the convenient synthesis of functional nanoparticles and other inorganic nanostructures

Ionic liquids are a new class of organic solvents with high polarity and a preorganized solvent structure. Very polar reactions can be carried out in these liquid in the absence of or with a controlled amount of water, and crystalline nanoparticles can be synthesized conveniently at ambient temperatures. The pronounced self-organization of the solvent is used in the synthesis of self-assembled, highly organized hybrid nanostructures with unparalleled quality. The extraordinary potential of ionic liquids in materials synthesis is described in this minireview and a physicochemical explanation is given.     

Synthesis, characterization, and applications of dendrimer-encapsulated nanoparticles

In this article we describe the synthesis, characterization, and applications of dendrimer-encapsulated nanoparticles (DENs). These materials are synthesized by a template approach in which metal ions are extracted into the interior of dendrimers and then subsequently chemically reduced to yield nearly size-monodisperse particles having dimensions of less than 3 nm. Monometallic, bimetallic (including core/shell), and semiconductor nanoparticles have been prepared by this route. The dendrimer component of these composites serves not only as a template for preparing the nanoparticle replica but also to stabilize the nanoparticle, makes it possible to tune solubility, and provides a means for immobilization of the nanoparticle on solid supports. These materials have a number of potential applications, but the focus here is on catalysis. Homogeneous catalytic reactions, including hydrogenations, Heck coupling, and Suzuki reactions, in water, organic solvents, biphasic fluorous/organic solvents, and liquid and supercritical CO2 are discussed. In many cases it is easy to recycle catalytic DENs. DENs can also be immobilized on supports, such as silica and titania, and used for heterogeneous catalysis. Bimetallic DENs are shown to have particularly interesting catalytic properties. In addition to a discussion of current progress in this field, a number of intriguing questions related to the properties and potential applications of these materials are examined.     

Insight into the Structure of MOF-Containing Hybrid Polymeric Microspheres

Polymer science exploited metal organic frameworks (MOFs) for various purposes, which is due to the fact that these materials are ideal platforms for identifying design features for advanced functional materials. The mechanism of polymerization using MOFs, is still largely unexplored and the detailed characterization of both materials in essential to understand the important interactions between the components. In this work modern advanced research methods were used to investigate the properties of MOF-containing hybrid polymeric microspheres. Hydrothermal conversion of CFA-derived iron particles was used to obtain MOF nanostructures, which were then introduced to the structure of hybrid polymer microspheres based on ethylene glycol dimethylacrylate (EGDMA) and triethoxyvinylsilane (TEVS). Chemical structures were confirmed by ATR-FTIR method. To provide information about the elemental composition of the tested materials and for the determination of chemical bonds present in the tested samples XPS method was applied. Morphology was studied using SEM microscopy, whereas porosity was investigated using ASAP technique. Swellability coefficients were determined using typical organic solvents and distilled water. Moreover, the ecological aspect concerning the use of fly ashes deserves to be emphasized.     

Nitrophenol resins for facile amide and sulfonamide library synthesis

Novel nitrophenol solid supports based on various resin materials (polystyrene, TentaGel, macroporous, PEGA, and silica gel) are reported for facile amide and sulfonamide library synthesis. The broad choice of resin materials available will allow the reaction to occur successfully in solvents ranging from nonpolar organic solvents to aqueous media.     

Synthesis and evaluation of poly(oxyethylene glycol) polymer (POP) supports

Mono- and alpha,omega-bis-styryl-oligo(oxyethylene glycol) ethers have been constructed in an efficient two-step synthesis. From these precursors, poly(oxyethylene glycol) polymer (POP) supports of varying monomer and cross-linker composition have been produced. The swelling properties and mass-solvent uptake of these novel materials have been evaluated in a variety of solvents, demonstrating that POP supports exhibit enhanced solvent compatibilities over the commercial resins TENTA-GEL, ARGO-GEL, and Merrifield's resin. The utility of POP supports in solid-phase organic chemistry has also been demonstrated successfully. It is anticipated that these high-loading polymeric supports will have generic application in the solid-phase synthesis of combinatorial libraries and the in situ screening of these libraries in the aqueous environment of a bioassay.     

利用离子液体负载反应底物的有机合成

综述了固相、液相组合化学中以可溶性离子液体为载体的有机合成新概念及最新研究进展,并主要介绍了离子液体作为载体负载反应底物在有机合成中的一些应用,如有关的重要有机反应、组合化学、小分子库合成等。该方法具有上载率高、适用反应范围宽、分离纯化简便、结构检测容易和可回收重复使用等诸多优越性,这对于传统的固相、液相合成方法是一个重大的进步。     

Functionalization of mesoporous carbon with superbasic MgO nanoparticles for the efficient synthesis of sulfinamides

Highly basic MgO nanoparticles with different sizes have been successfully immobilized over mesoporous carbon with different pore diameters by a simple wet-impregnation method. The prepared catalysts have been characterized by various sophisticated techniques, such as XRD, nitrogen adsorption, electron energy loss spectroscopy, high-resolution TEM, X-ray photoelectron spectroscopy, and the temperature-programmed desorption of CO(2). XRD results reveal that the mesostructure of the support is retained even after the huge loading of MgO nanoparticles inside the mesochannels of the support. It is also demonstrated that the particle size and dispersion of the MgO nanoparticles on the support can be finely controlled by the simple adjustment of the textural parameters of the supports. Among the support materials studied, mesoporous carbon with the largest pore diameter and large pore volume offered highly crystalline small-size cubic-phase MgO nanoparticles with a high dispersion. The basicity of the MgO-supported mesoporous carbons can also be controlled by simply changing the loading of the MgO and the pore diameter of the support. These materials have been employed as heterogeneous catalysts for the first time in the selective synthesis of sulfinamides. Among the catalysts investigated, the support with the large pore diameter and high loading of MgO showed the highest activity with an excellent yield of sulfinamides. The catalyst also showed much higher activity than the pristine MgO nanoparticles. The effects of the reaction parameters, including the solvents and reaction temperature, and textural parameters of the supports in the activity of the catalyst have also been demonstrated. Most importantly, the catalyst was found to be highly stable, showing excellent activity even after the third cycle of reaction.     

A General Strategy for Site‐Directed Enzyme Immobilization by Using NiO Nanoparticle Decorated Mesoporous Silica

Mesoporous materials have recently gained much attention owing to their large surface area, narrow pore size distribution, and superior pore structure. These materials have been demonstrated as excellent solid supports for immobilization of a variety of proteins and enzymes for their potential applications as biocatalysts in the chemical and pharmaceutical industries. However, the lack of efficient and reproducible methods for immobilization has limited the activity and recyclability of these biocatalysts. Furthermore, the biocatalysts are usually not robust owing to their rapid denaturation in bulk solvents. To solve these problems, we designed a novel hybrid material system, mesoporous silica immobilized with NiO nanoparticles (SBA‐NiO), wherein enzyme immobilization is directed to specific sites on the pore surface of the material. This yielded the biocatalytic species with higher activity than free enzyme in solution. These biocatalytic species are recyclable with minimal loss of activity after several cycles, demonstrating an advantage over free enzymes.     

Drying of organic solvents: quantitative evaluation of the efficiency of several desiccants

Various commonly used organic solvents were dried with several different drying agents. A glovebox-bound coulometric Karl Fischer apparatus with a two-compartment measuring cell was used to determine the efficiency of the drying process. Recommendations are made relating to optimum drying agents/conditions that can be used to rapidly and reliably generate solvents with low residual water content by means of commonly available materials found in most synthesis laboratories. The practical method provides for safer handling and drying of solvents than methods calling for the use of reactive metals, metal hydrides, or solvent distillation.     

Solid‐Phase Incorporation of an ATRP Initiator for Polymer–DNA Biohybrids

The combination of polymers with nucleic acids leads to materials with significantly advanced properties. To obviate the necessity and complexity of conjugating two macromolecules, a polymer initiator is described that can be directly covalently linked to DNA during solid‐phase synthesis. Polymer can then be grown from the DNA bound initiator, both in solution after the DNA‐initiator is released from the solid support as well as directly on the solid support, simplifying purification. The resulting polymer‐DNA hybrids were examined by chromatography and fluorescence methods that attested to the integrity of hybrids and the DNA. The ability to use DNA‐based supports expands the range of readily available molecules that can be used with the initiator, as exemplified by direct synthesis of a biotin polymer hybrid on solid‐support. This method expands the accessibility and range of advanced polymer biohybrid materials.     

Chemical synthesis of hybrid materials based on PAni and PEDOT with polyoxometalates for electrochemical supercapacitors

Hybrid organic–inorganic materials based on conjugated polymers constitute state-of-the-art compounds with recognized technological implications. In the area of energy conversion, production and storage devices, these materials have been applied as electrodes for batteries, supercapacitors, fuel cells or solar cells, among others. Their importance relies on the wide variety of organic and inorganic counterparts that these hybrids can be made of. The properties from each part can be tailored in order to contribute to a final desired characteristic or the combined properties from both. The unique combination of useful properties found in these materials include electronic conductivity (e⁻ or h⁺), ionic transport, reversible electroactivity, electrooptical properties typical of semiconductors as well as electrochromic, pH- and composition-dependent properties, all of them to add to their polymeric nature. This is an excellent basis for the design of hybrid materials in which either of these properties or their combinations work to enhance or combine with those of a myriad inorganic phases with electronic, magnetic, photochemical, electrochemical, optical or catalytic properties. A large variety of functional hybrid materials can thus be designed and fabricated in which multifunctionality can be easily built to address specific technological needs. In this work we present our most recent results on new synthesis methodology developed for the chemical synthesis of the hybrid PAni/PMo12 and their application as electrochemical supercapacitors. We also report the synthesis of a new hybrid material of PEDOT/PMo12 synthesized for the first time by chemical methods and applied also in electrochemical supercapacitors. Initial results shows capacitance values as high as 168 F/g for the hybrid PAni/PMo12 and about 130 F/g for the hybrid PEDOT/PMo12.     

Carbon-Based Material-Supported Palladium Nanocatalysts in Coupling Reactions: Discussion on their Stability and Heterogeneity

Scientific interest in carbon-based materials (CBMs) has grown dramatically over the past few decades. Due to a variety of atomic orbital hybrid forms (sp, sp² and sp³ hybridization), carbon can form a variety of materials with diverse structures and characteristics. CBMs used as efficient catalyst supports show extensive promise in organic reactions, which is attributed to their structural similarity with organics, large specific surface area, chemical stability, and photocatalytic properties. This review presents the synthesis of CBM-supported palladium nanocatalysts based on impregnation, template methods, etc. The CBMs include activated carbon (AC), graphene, carbon nanotubes (CNTs), and their functionalized products, as supports for improving the activity and recyclability of simple Pd nanocatalysts. After surveying the literature where these catalysts have been utilized for carbon–carbon coupling reactions, there is a particular emphasis on Suzuki, Heck, and Sonogashira reactions. The catalytic mechanism of these Pd nanocatalysts (surface heterogeneous catalysis or homogeneous catalysis caused by Pd leaching) is discussed in detail, especially the effect of Pd leaching on the stability of the catalyst.     

钌基氨合成催化剂的制备方法

与铁催化剂相比较,钌基氨合成催化剂具有低温、低压、高活性的特点。对于不同的载体、制备方法和制备条件对催化剂性能影响较大。本文从载体的前处理、活性组分钌和助剂的加入方式等方面简要阐述了钌基氨合成催化剂制备方法的研究进展,介绍了熔融法、升华法、离子交换法、超声法、沉淀法、溶胶-凝胶法、浸渍法、微波辅助法等钌基氨合成催化剂制备方法,指出了一些制备方法的不足之处,并展望了钌基氨合成催化剂制备方法的研究方向。     

Towards the Chemical Synthesis of Proteins

The chemical total synthesis of proteins using solid supports has made great progress. It is therefore becoming a reality what E. Fischer already predicted in 1902 1 1 Cited from Nobel Lectures—Chemistry 1901-1921, Elsevier, Amsterdam 1966, p. 34.
: “I foresee the time when physiological chemistry… is able to prepare synthetic enzymes.” The synthesis of peptides of up to 20 amino acids by the well-established solid-phase procedure on polymeric supports (SPPS) has made great progress through the development of newer supports. At the same time, methods have emerged which facilitate the separation and characterization of peptides, thus allowing optimization of the synthesis of pure materials. The new supports which enable one to synthesize peptides by a rapid continuous flow procedure are characterized by hydrophilicity, beads of approximately equal size, similar swelling properties in the solvents used for peptide synthesis, and stability at high pressure. With graft copolymers of weakly cross-linked polystyrene and linear polyethylene glycol (PEG), the synthetic cycle for coupling of one amino acid can routinely be reduced to 10–20 min with a concomitant higher yield. With beads of monodispersed graft copolymer of 10 μm diameter, a synthetic cycle can, in principle, be shortened to 1–5 min. By utilizing this high-speed solid-phase procedure, larger peptides up to the size of proteins could also be prepared in a few hours. With newer mass spectroscopic methods such as ion-spray mass spectrometry, peptides of up to a molecular mass of 100 kDa can be characterized, and with the advent of capillary electrophoresis, another very efficient separation tool, besides HPLC, is at our disposal.     

Metamorphosis of ordered mesopores to micropores: periodic silica with unprecedented loading of pendant reactive organic groups transforms to periodic microporous silica with tailorable pore size

Ordered porous silicas with unprecedented loadings of pendant vinyl groups have been synthesized via co-condensation of tetraethyl orthosilicate (TEOS) and triethoxyvinylsilane (TEVS) under basic conditions in the presence of cetyltrimethylammonium surfactant. The resulting organosilicate-surfactant composites exhibited at least one low-angle X-ray diffraction (XRD) peak up to the TEVS:TEOS molar ratio of 7:3 (70% TEVS loading) in the synthesis gel. The surfactant was removed from these composites without any structural collapse. Nitrogen adsorption provided strong evidence of the presence of uniformly sized pores and the lack of phase separation up to TEVS:TEOS ratios as high as 13:7 (65% TEVS loading), whereas (29)Si MAS NMR and high-resolution thermogravimetry showed essentially quantitative incorporation of the organosilane. Thus, a hitherto unachieved loading level for pendant groups, considered by many to be impossible to achieve for stable organosilicas because of the expected framework connectivity constraints, has been obtained. The resulting vinyl-functionalized silicas exhibited gradually decreasing pore diameter (from 2.8 to 1.7 nm for TEVS loadings of 25-65%) and pore volume as the loading of pendant groups increased, but the specific surface area was relatively constant. Because of the reactivity of vinyl groups, ordered silicas with very high loadings of these groups are expected to be robust starting materials for the synthesis of other organic-functionalized ordered microporous materials. Herein, we demonstrate that these starting materials can also be transformed via calcination into ordered microporous silicas with pore diameters tailorable from 2.5 to as little as 1.4 nm simply by using an appropriate loading of the vinyl-functionalized precursor. This ease of the micropore size adjustment and the attained degree of structural ordering (as judged from XRD) have not been reported before. The novel ordered microporous materials reported herein are promising as adsorbents and catalyst supports.     

Dendrimers and hyperbranched polymers as high-loading supports for organic synthesis

Polymeric supports have become a big necessity for automated synthesis and combinatorial chemistry, yet, the loading capacities of most polystyrene resins are very limited (typically < 1.5 mmol x g(-1)). Dendrimers and hyperbranched polymers have been discussed for this application and now became readily available. These soluble polymers can either be used directly as high-loading supports for substrates, reagents, and catalysts or alternatively in hybrid polymers linked to conventional polystyrene resins.     

Boron nitride nanotube-based amphiphilic hybrid nanomaterials for superior encapsulation of hydrophobic cargos

We report an organic-inorganic hybrid core-shell nanomaterial obtained by conjugation of an amphiphilic monomethoxy-poly(ethylene glycol)-b-poly(epsilon-caprolactone) diblock copolymer to hydroxylated boron nitride nanotubes (BNNTs). The extent of copolymer grafting reached 64% w/w, an exceptionally high value. The hybrid materials exhibit excellent physical stability in water and an outstanding loading capacity (31.3% w/w) for curcumin, a hydrophobic drug. Moreover, they present good compatibility with the Caco2 cell line, a model of intestinal epithelium. Our findings demonstrate the potential of multifunctional hybrid BNNTs to serve as a platform for complex amphiphilic nanoparticle architectures with improved features.     

Solid phase synthesis of aromatic oligoamides: application to helical water-soluble foldamers

Synthetic helical aromatic amide foldamers and in particular those based on quinolines have recently attracted much interest due to their capacity to adopt bioinspired folded conformations that are highly stable and predictable. Additionally, the introduction of water-solubilizing side chains has allowed to evidence promising biological activities. It has also created the need for methods that may allow the parallel synthesis and screening of oligomers. Here, we describe the application of solid phase synthesis to speed up oligomer preparation and allow the introduction of various side chains. The synthesis of quinoline-based monomers bearing protected side chains is described along with conditions for activation, coupling, and deprotection on solid phase, followed by resin cleavage, side-chain deprotection, and HPLC purification. Oligomers having up to 8 units were thus synthesized. We found that solid phase synthesis is notably improved upon reducing resin loading and by applying microwave irradiation. We also demonstrate that the introduction of monomers bearing benzylic amines such as 6-aminomethyl-2-pyridinecarboxylic acid within the sequences of oligoquinolines make it possible to achieve couplings using a standard peptide coupling agent and constitute an interesting alternative to the use of acid chloride activation required by quinoline residues. The synthesis of a tetradecameric sequence was thus smoothly carried out. NMR solution structural studies show that these alternate aminomethyl-pyridine residues do not perturb the canonical helix folding of quinoline monomers in protic solvents, contrary to what was previously observed in nonprotic solvents.     

Epoxy-functionalized large-pore SBA-15 and KIT-6 as affinity chromatography supports

Mesoporous silica supports are proposed as an alternative to polymeric stationary phases for fast affinity chromatography due to their better mechanical strength compared to polymers. Ideal supports should combine high surface area and large pore size to allow a high loading capacity of large molecules, such as proteins, and favor their accessibility. Increasing the pore size of large-surface area micelle-templated silicas (SBA-15, KIT-6) has been achieved by swelling the micelles by the addition of organic molecules and increasing synthesis time and temperature. The pore size of hexagonal silica mesostructured SBA-15 has been increased up to 35 nm. These materials could find therefore application as affinity chromatography for immunoextraction.