PREPARATION OF POLYSULFONAMIDE/TiO2 NANOCOMPOSITES BY SOL-GEL

Polysulfonamide (PSA) was synthesized at room temperature, the polymerization based on terephthaloyl chloride and 3,3 '-diaminodiphenylsulfone in the common solvent N,N -Dimethyl-acetamide (DMAc). Polysulfonamide/titanium oxide nanocomposites were prepared by sol-gel method. Tetrabutyl titanate(TBT) was added into the polysulfonamide solution, at the same time ,some water was mixed to make the TBT hydrolyze. In the process, hydrochloric acid was used to catalyze the reaction. The polysulfonamide chemistry structure was characterized by FT-IR spectrum. Atomic force microscopy (AFM) was employed to observe the microstructure of the composite film. The thermal property was investigated by TGA.The results show that we have succeeded to synthesize the polysulfonamide, TiO2particles were well distributed in the composite film and average size was about 20 nm on average, the heat-resistance of nanocomposite was batter than the pure polysulfonamide.     

手性苯并咪唑铜(Ⅱ)络合物催化合成1,1''''-联-2萘酚

In the past several decades, much attention has been paid to optically active, C2-asymmetric 1,1′-binaphthalene-2,2′-diol and its derivatives because of their application in inducing chirality in asymmetric synthesis[1,2]. Enantiomerically pure 1,1′-binaphthalene-2,2′-diol has been prepared by many methods ranging from the classical resolution via crystallization of the diastereoisomeric salts[3] to asymmetric oxidative coupling[4～6].     

Photosensitization of TiO2 colloids by Erythrosin B in acetonitrile

Photosensitization by Erythrosin B of a TiO₂ colloidal dispersion in acetonitrile has been studied by fast kinetic spectroscopy. The dye molecules adsorbed on the TiO₂ surface had a significantly shorter lifetime (2̃ 250 ps) compared to those in homogeneous solution (≈ 1.6 ns) in acetonitrile. The photosensitization of TiO₂ occurred more efficiently from the singlet than from the triplet state of the dye.     

Conductance of aqueous NaCl solutions at pressures up to 2000 atm

Electrical conductance measurements are reported for aqueous NaCl solutions at 25°C as a function of concentration up to 0.02M and pressures up to 2000 atm. The data were analyzed with the Fuoss-Hsia-Fernandez-Prini (FHFP) equation. The standard error of fit, , varies from 0.04 at 1 atm to 0.10 at 2000 atm. The increase of with pressure arises from increasing non-randomness in the distribution of errors about the FHFP equation suggesting that modifications in the theory are necessary. The pressure dependence of _O for NaCl and KCl is nearly identical.Contribution of the Scripps Institution of Oceanography, New Series     

丙烯醇等离子体处理聚四氟乙烯的表面结构与润湿性

聚四氟乙烯经丙烯醇等离子体处理后,在其表面形成了一层亲水性的聚合物薄膜。水在表面的接触角为40—60°不等,由等离子体处理时间决定。对表面的全反射红外光谱、ESCA分析和SEM观测发现,等离子体处理后在原表面上形成的聚合物膜包含—CH_3、—CH_2、C=O和C—OH等基团,并且表面光滑、平整。     

IIB族金属二硫代氨基甲酸配合物的合成、表征及热稳定性研究

在甲醇溶液中合成了一系列IIB过渡金属Zn(II), Cd(II)的二羟乙基二硫代氨基甲酸[(EtOH)₂dtc]的配合物, 并对配合物M[(EtOH)₂dtc]₂L [M＝Zn (1), Cd (2), L＝2,2'-联吡啶; M＝Zn (3), Cd (4), L＝邻菲啰啉]进行了红外光谱、元素分析、热重分析表征工作. 热重分析表明配合物1～4中DTC配体比中性配体更易失去, 热分解最终产物为相应的氧化物. 对化合物1, 2做了X-ray单晶衍射分析, 1为单斜晶系, P2₁/c空间群, 晶胞参数a＝0.72146(5) nm, b＝2.61720(18) nm, c＝1.59438(11) nm,b＝97.899(2)°, V＝2.9820(4) nm³, Z＝4, m＝1.133 mm^－1, D_c＝1.297 Mg•m^－3; 2为三斜晶系, P-1空间群, 晶胞参数a＝1.0075(2) nm, b＝1.1580(2) nm, c＝1.1777(2) nm, a＝70.92(3)°, b＝85.71(3)°, γ＝81.02(3)°, V＝1.2822(4) nm³, Z＝2, m＝2.118 mm^－1, D_c＝1.630 Mg•m^－3.     

用FTIR定量测定聚对苯二甲酸乙二酯晶区和非晶区反式构象含量

用傅里叶变换红外分光光度计测定不同条件下退火处理的聚对苯二甲酸乙二酯膜的谱图, 用谱带分离技术对归属于反式构象的1340cm^-^1谱带进行阻尼最小两乘分峰处理, 结合属左右式构象贡献的1454cm^-^1谱带, 用线性回归分析的方法获得晶区反式构象、非晶区反式构象、非晶区左右式构象的百分含量。     

不同环大小分子筛对钼基分子筛催化剂上甲烷无氧芳构化反应的影响

 钼基分子筛催化剂，由于不同分子筛的孔道大小及孔道形状不同\r\n，对甲烷芳构化反应表现出不同的催化性能．具有8元环孔道结构的小\r\n孔ERS－7分子筛没有催化活性，说明甲烷的芳构化反应离不开分子筛孔\r\n道的择形作用，较小的孔道中不能生成苯等芳烃．具有10元环孔道结构\r\n的ZSM－5，ZSM－11和ZRP－1三种分子筛具有较好的催化性能，但由于\r\n其孔道大小及孔道形状的差别在催化行为上表现出一定的差异．具有1\r\n0元环和12元环孔道结构的MCM－22分子筛，尤其对苯等轻芳烃而言，催\r\n化性能最佳．具有12元环孔道结构的JQX－1以及中孔分子筛SBA－15，\r\n虽然具有一定的催化性能，但活性较低．研究结果表明，孔道大小与苯\r\n分子动态直径相近或孔道稍大的分子筛是催化甲烷芳构化反应的良好载\r\n体，孔道过大或过小都不利于苯和萘等芳烃的生成．     

二溴甲烷的同步辐射光电离研究

采用５０～２００ｎｍ同步辐射光，对ＣＨ２Ｂｒ２的光电离过程进行了研究，根据测定的母体离子及其碎片离子出现势，得到二溴甲烷的绝热电离势为１０．２３±０．０１ｅＶ，并获得了离子的生成焓，解离能及键能等热力学数据，分析了碎片离子的光解离电离通道。     

正庚烷在β沸石负载碳化钼催化剂上的异构化研究

利用程序升温还原法制备了β沸石负载碳化钼催化剂。XRD表征显示，利用正戊烷作为碳源得到了对异构化具有活性的βMo2C。以正庚烷为模型反应物，在连续流动固定床反应装置上考察了温度、压力、空速和氢烃比对βMo2C/β沸石催化剂临氢异构化反应性能的影响。获得了β沸石负载碳化钼催化剂上正庚烷异构化的最佳反应条件温度270℃～275℃，压力1.0MPa～1.5MPa，体积空速1.0h－1，氢烃体积比200∶1。在最佳条件下反应物转化率为82%，选择性和异构产物收率分别达到71%和58%。