Biotechnological Utilization of Biodiesel-Derived Glycerol for the Production of Ribonucleotides and Microbial Biomass

Ten yeast strains were evaluated concerning their capabilities to assimilate biodiesel-derived glycerol in batch cultivation. The influence of glycerol concentration, temperature, pH and yeast extract concentration on biomass production was studied for the yeast selected. Further, the effect of agitation on glycerol utilization by the yeast Hansenula anomala was also studied. The yeast H. anomala CCT 2648 showed the highest biomass yield (0.30?g?g^?1) and productivity (0.19?g?L^?1?h^?1). Citric acid, succinic acid, acetic acid and ethanol were found as the main metabolites produced. The increase of yeast extract concentration from 1 to 3?g?L^?1 resulted in high biomass production. The highest biomass concentration (21?g?L^?1), yield (0.45?g?g^?1) and productivity (0.31?g?L^?1?h^?1), as well as ribonucleotide production (13.13?mg?g^?1), were observed at 700?rpm and 0.5?vvm. These results demonstrated that glycerol from biodiesel production process showed to be a feasible substrate for producing biomass and ribonucleotides by yeast species.     

Non-invasive imaging of shallow bubble columns using electrical capacitance tomography

This paper deals with application of non-invasive electrical capacitance tomography to study the hydrodynamics of shallow bed bubble columns. Two bubble columns with different height to diameter ratio were used. Air–kerosene system that represents dielectric two-phase mixture was investigated. The ECT provided good measurement of the gas holdup at different gas velocities compared to the classical pressure measurements. The ECT was able to provide the gas hold up and the bubble velocities distribution across the column diameter at different gas velocities. The study revealed that spatial gas holdup and bubble velocity distributions are sharp with parabolic shape in the small bubble column (H_D/D_C = 5). However, in the large bubble column (H_D/D_C = 4) the gas holdup and bubble velocity profiles were flatter indicating improvement in the mixing homogeneity and leading to well-mixed reactor. 3D graphical visualization of the flow regimes and transition points were also examined using the ECT. In the small bubble column flow regimes were heterogeneous to slugs flow especially at high flow rate, resulted in downward flow near the walls and imperfect mixing.     

Solution approaches for the multiobjective stochastic programming

We survey in this paper various solution approaches for multiobjective stochastic problems where random variables can be in both objectives and constraints parameters. Once a problem requires a stochastic formulation, a first step consists in transforming the problem into its deterministic formulation. We propose to classify and evaluate such transformations with regards to the many proposed concepts of efficiency. The paper addresses also some applications of the multiobjective stochastic programming models.     

Tetranaphthyleno[5,6‐bcd:11,12‐b′c′d′:17,18‐b′′c′′d′′:23,24‐b′′′c′′′d′′′]tetrafuran

The title compound, C₄₀H₁₆O₄ or [C₁₀H₄O]₄, is a planar tetrameric cyclooligomer which crystallizes in the monoclinic space group P2₁/n. The compound is located on an inversion center with the asymmetric unit consisting of half of the molecule. The compound displays an interesting packing structure, where the cyclooligomer displays both layered packing with respect to nearest neighbors and a rotation of adjacent planar rings that results in additional interactions. The geometric parameters of the compound agree well with those of comparable cyclooligomers, while the packing reveals some similarities and differences.     

Simultaneous determination of cotinine and trans‐3‐hydroxycotinine in urine by automated solid‐phase extraction using gas chromatography–mass spectrometry

A gas chromatography–mass spectrometry method was developed and validated for the simultaneous automated solid‐phase extraction and quantification of cotinine and trans‐3‐hydroxycotinine in human urine. Good linearity was observed over the concentration ranges studied (R² > 0.99). The limit of quantification was 10 ng/mL for both analytes. The limits of detection were 0.06 ng/mL for cotinine (COT) and 0.02 ng/mL for trans‐3‐hydroxycotinine (OH‐COT). Accuracy for COT ranged from 0.98 to 5.28% and the precision ranged from 1.24 to 8.78%. Accuracy for OH‐COT ranged from ?2.66 to 3.72% and the precision ranged from 3.15 to 7.07%. Mean recoveries for cotinine and trans‐3‐hydroxycotinine ranged from 77.7 to 89.1%, and from 75.4 to 90.2%, respectively. This analytical method for the simultaneous measurement of cotinine and trans‐3‐hydroxycotinine in urine will be used to monitor tobacco smoking in pregnant women and will permit the usefulness of trans‐3‐hydroxycotinine as a specific biomarker of tobacco exposure to be determined. © 2014 The Authors. Biomedical Chromatography published by John Wiley & Sons Ltd.     

Copper‐Catalyzed Arylation of Nitrogen Heterocycles from Anilines under Ligand‐Free Conditions

The arylation of pyrazole and derivatives can be achieved by coupling arenediazonium species (formed in situ from anilines) by using a catalytic system that employs low‐toxicity and inexpensive copper metal under very mild and ligand‐free conditions (T=20 °C). From other nitrogen heterocycles, the presence of an additive (NBu₄I) significantly improves the efficiency of the catalytic system. These results represent the first examples of C?N bond formation from arenediazonium species.     

Use of pervaporation to separate butanol from dilute aqueous solutions: Effects of operating conditions and concentration polarization

This study deals with the separation of n-butanol from aqueous solutions by pervaporation. The effects of feed concentration, temperature, and membrane thickness on the separation performance were investigated. Over the low feed butanol concentration range (0.03–0.4 wt%) studied, the butanol flux was shown to increase proportionally with an increase in the feed butanol concentration, whereas the water flux was relatively constant. An increase in temperature increased both the butanol and water fluxes, and the increase in butanol flux was more pronounced than water flux, resulting in an increase in separation factor. While the permeation flux could be enhanced by reducing the membrane thickness as expected for all rate-controlled processes, the separation factor was compromised when the membrane became thinner. The effect of membrane thickness on the separation performance was analyzed taking into account the boundary layer effect. This could not be fully attributed to the concentration polarization, which was found not significant enough to dominate the mass transport. A variation in the membrane thickness would vary the local concentration of permeant inside the membrane, thereby affecting the permeation of butanol and water differently. Thus, caution should be exercised in using permeation flux normalized by a given thickness to predict the separation performance of a membrane with a different thickness because the membrane selectivity can be affected by the membrane thickness even in the absence of boundary layer effect.     

Effect of magnesium dihydroxide nanoparticles on thermal degradation and flame resistance of PMMA nanocomposites

The influence of magnesium dihydroxide (MDH) nanoparticles on thermal degradation and fire behavior of poly(methyl methacrylate) (PMMA) has been investigated by thermogravimetric analysis (TGA), cone calorimeter, and pyrolysis‐combustion flow calorimeter (PCFC) tests, respectively. MDH nanoparticles with either lamellar or fibrous shape have been synthesized via a sol‐gel technique and characterized by transmission electron microscopy (TEM) and X‐ray diffraction analysis. PMMA–MDH nanocomposites have been prepared by melt blending the recovered MDH nanoparticles within PMMA at different loadings (5, 10, and 20 wt% MDH). According to TGA results, the incorporation of lamellar or fibrous MDH nanoparticles into PMMA leads to a significant improvement in PMMA thermal stability, both under air and inert atmosphere. The results obtained by PCFC and cone calorimeter tests show an important decrease in the peak of heat release rate (pHRR) concomitant with charring during the combustion. Lamellar MDH nanoparticles were found to be more efficient than fibrous MDH nanoparticles. Copyright © 2010 John Wiley & Sons, Ltd.